Makita CL070 Cordless Vacuum Replacement Battery 7.2V 2500mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Makita CL070 Cordless Vacuum Replacement Battery 7.2V 2500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Makita CL070 Cordless Vacuum Replacement Battery 7.2V 2500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.2V
Amp
2500mAh
Makita CL070 Series — 7.2V Li-ion Replacement Battery (194355-4)
This 7.2V 2500mAh lithium-ion battery replaces OEM part numbers 194355-4, 194356-2, BL7010, and BL7015. It fits the Makita CL070, CL070D, CL070DS, CL070DZ, and over 37 additional Makita 7.2V platform models. The battery slots into the same housing and connects via the same BMS handshake as the original pack.
- CL070 platform compatibility: Every model in this vacuum series runs the same 7.2V rail and uses an identical connector pinout and BMS communication protocol. That shared architecture is why one battery covers the full CL070 range without modification.
- Bench tested on actual hardware: We cycled this pack on a CL070DS and monitored the BMS through repeated suction loads. Cell voltage stayed stable above the 6.0V low-cutoff threshold and the protection circuit responded correctly to simulated overcurrent events.
- Motor inrush on first cycles: On first use, run the vacuum at standard suction for two full charge-discharge cycles before using any boost or maximum suction mode. This allows the BMS to log the motor's inrush current signature and set accurate overcurrent thresholds before heavy draw is applied.
Charger blinking red on a new 7.2V pack after storage
Lithium-ion cells self-discharge during shelf storage. If a pack sits long enough, cell voltage can drop below the charger's acceptance threshold — typically around 5.5V for the Makita 7.2V platform — and the charger refuses to begin a charge cycle. The BMS interprets this as a fault condition and signals the charger to hold off. To recover the pack, place it in the charger and leave it connected for 20–30 minutes; most Makita chargers include a trickle pre-charge mode that slowly raises cell voltage back above the acceptance threshold before switching to normal charge mode.
CL070 suction drops and motor bogs mid-use
Weak or fading suction mid-session is usually a voltage sag problem, not a capacity problem. High contact resistance at the battery terminal — from dirt, oxidation, or a loose seat — causes the rail voltage to drop under load even when the cell charge looks fine at rest. Pull the battery, check the gold contact pins on both the pack and the tool for debris or tarnish, and wipe them with a dry cloth. After reseating, open-circuit voltage should read at least 7.6V on a charged pack; anything below that under light load points to a cell or connection issue worth investigating before the next use.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Makita
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My CL070 cuts out the instant I press the trigger — is the battery tripping?
Yes — that's a BMS overcurrent trip on motor-start inrush. The initial current spike when the vacuum motor starts can briefly exceed the pack's overcurrent threshold, especially on a cold or partially discharged battery. Remove the pack, wait 60 seconds to let the BMS reset, then reinsert and trigger gently rather than pressing the button to full travel immediately. If the cutout keeps happening, check that the terminal contacts are clean and seated flush, as added resistance amplifies the inrush spike.
The CL070 runs fine at first but then loses suction and feels warm after extended use — what's happening?
That's thermal cutoff. The motor and the enclosed battery housing both generate heat, and once cell temperature hits the BMS thermal limit — around 60°C on most Makita 7.2V packs — the circuit reduces output to protect the cells. Let the battery cool for at least 10 minutes away from the tool before reseating it. If this happens on every session, check that the battery vent slots on the CL070 housing aren't blocked by debris — restricted airflow accelerates the heat buildup.
This battery is only a few months old but it doesn't hold a charge like it used to — what causes early capacity fade on a vacuum battery?
Shallow cycling is the main culprit on low-draw devices like handheld vacuums. If you top up the battery after every short session without ever running it down past 50%, the BMS gradually recalibrates its capacity estimate downward and the cells lose usable depth. Run the battery through at least two full discharge-to-charge cycles — use the vacuum until the low-voltage cutoff triggers, then charge fully to 8.4V — to recalibrate the BMS and restore accurate capacity tracking.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
