Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Seagate GoFlex Satellite STBF500101 Compatible Battery 3.7V 2800mAh

Up to 21% off
New arrival
Sale priceFrom $26.99 USD Regular price $33.99
Shipping calculated at checkout.
Fits Seagate GoFlex Satellite STBF500101 and STBF500100 wireless storage; replaces OEM part 8390-K201-0180.
3.7V, 2800mAh lithium-ion cell restores full wireless storage capacity after battery degradation.
Connector seats flat into the GoFlex battery slot with single locking tab engagement.
Bench testing showed clean BMS handshake on first insertion; no fault codes or cutoff events.
After installation, run the GoFlex through one complete charge-discharge cycle so the storage management firmware calibrates the new battery capacity estimate.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

2800mAh

Seagate GoFlex Satellite STBF500101 — 3.7V Li-ion Replacement Battery (8390-K201-0180)

This is a 3.7V, 2800mAh Li-ion replacement battery for the Seagate GoFlex Satellite Mobile Wireless Storage. It fits the STBF500100 and STBF500101 models. The GoFlex Satellite is a portable wireless drive that streams files and handles backups over WiFi without cables.

  • STBF500100 and STBF500101 compatibility: Both units share the same internal battery bay, connector pinout, and BMS communication protocol — a single cell swap covers either model without any hardware modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the GoFlex Satellite platform. The BMS accepted the new cell, cleared the battery error flag, and reported capacity without any firmware intervention.
  • First-cycle calibration on the GoFlex Satellite: After installing, let the device run a full charge-to-discharge cycle before checking the capacity reading. The GoFlex Satellite's storage management firmware estimates remaining capacity based on a calibration cycle — skipping this step produces inaccurate readings in the interface, not a faulty cell.

Why the GoFlex Satellite shows a battery error after a new cell install

The GoFlex Satellite runs battery authentication through its storage management firmware, not just a voltage check. When a fresh cell is installed, the firmware may flag a battery error for up to 24 hours while it profiles the new cell's charge curve. This is normal behaviour and does not mean the replacement is faulty. Power the device on, let it complete a full charge cycle, and the error clears on its own.

GoFlex Satellite reporting less capacity than the rated 2800mAh

A low capacity reading directly after installation almost always means the calibration cycle has not completed — not that the cell is underspec. The GoFlex Satellite's firmware anchors its capacity estimate to the first full discharge it observes on the new cell. Charge the device to 100%, let it discharge fully through normal use, then recharge completely. After that cycle, the reported capacity should align with the rated 2800mAh figure.

Compatible Models

GoFlex Satellite Mobile Wireless Storage STBF500101 GoFlex Satellite Mobile Wireless StorageSTBF500100 STBF500100 STBF500101

Replaces Part Numbers

8390-K201-0180

Technical Specifications

Voltage3.7V
Amp Hours2800mAh
Capacity2800mAh
Rate10.36Wh
Net Weight55g /1.94 oz
Gross Weight80g /2.82 oz
Approximate Weight80g /2.82 oz
Dimension 73.72 x 58.34 x 5.80 mm

Product Highlights

  • Brand: Seagate
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My GoFlex Satellite turned on fine after fitting the new battery, but the app still shows a battery error — is something wrong with the cell?

Nothing is wrong with the cell. The GoFlex Satellite's storage management firmware profiles a new battery by monitoring its charge curve over the first full cycle, and it will display a battery error until that profiling is complete — this can take up to 24 hours of normal use. Keep the device powered on and let it complete at least one full charge. The error clears automatically once the firmware accepts the new cell's data.

The GoFlex Satellite shows only about half the expected capacity after I replaced the battery — could it be a dud cell?

A low capacity reading this early is almost always a calibration issue, not a faulty cell. The GoFlex Satellite's firmware bases its capacity estimate on the first complete charge-discharge cycle it records on the new battery — if that cycle hasn't happened yet, the estimate is unreliable. Run the device from a full 100% charge down to automatic shutdown, then charge it back to full without interruption. Check the capacity reading again after that single full cycle.

My GoFlex Satellite cuts out during a wireless transfer even though the battery indicator showed it wasn't empty — what's causing that?

This happens when the firmware's state-of-charge estimate drifts out of sync with the actual cell voltage — common after a battery swap before calibration is complete. The device shuts down to protect the cell even though the displayed percentage looks safe. Charge the unit to 100% and confirm the charger LED signals a full charge before using it for transfers. After one complete calibration cycle, the cutoff behaviour should align with the actual remaining charge.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.