Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Acer Iconia One 10 B3-A40 Replacement Battery 3.7V 6000mAh

Up to 20% off
New arrival
Sale priceFrom $40.99 USD Regular price $50.99
Shipping calculated at checkout.
Fits Acer Iconia One 10 B3-A40 tablet; replaces OEM part PR-279594N.
3.7V, 6000mAh Li-Polymer cell powers display, processor, and WiFi without throttling.
Connector solders directly to motherboard; no latch or keyed slot involved.
We ran full charge cycles on a B3-A40 mainboard; BMS accepted the new cell without fault codes.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

6000mAh

Acer Iconia One 10 B3-A40 — 3.7V Li-Polymer Replacement Battery (PR-279594N)

This is a 3.7V, 6000mAh Li-Polymer replacement battery for the Acer Iconia One 10 B3-A40 tablet. It replaces OEM part PR-279594N and fits the 10-inch Android tablet directly. Swap it when the original cell no longer holds a charge or shuts the tablet down unexpectedly.

  • B3-A40 fit: The B3-A40 uses a flat Li-Polymer pouch cell at 3.7V nominal. This unit matches the original connector pinout and BMS handshake so the tablet's charge controller recognises it without errors on boot.
  • Bench tested on actual hardware: We ran a full charge cycle and monitored BMS behaviour through charge termination. The protection circuit responded correctly to trickle, constant-current, and CV phases with no thermal trip or error flags.
  • Fuel gauge recalibration after swap: After fitting this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. This resets the fuel gauge IC calibration against the new cell and clears the inaccurate percentage readings that appear immediately after installation.

Tablet shutting down at 15–25% remaining after battery swap

The B3-A40 draws hard when the display is at full brightness and WiFi is active together. That combined load causes a voltage sag that trips the BMS cutoff threshold before the fuel gauge reaches zero. The old cell's discharge curve is still mapped in firmware, so the percentage shown does not match the new cell's actual state of charge. Run one full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% — this re-maps the curve and stops premature cutoffs.

Fast charging unavailable after fitting a replacement cell

The B3-A40 charge IC re-negotiates charge current on the first accepted cycle with a new cell. Until that cycle completes, the controller defaults to standard 5V charging as a precaution. This is normal behaviour — not a fault with the battery or the charger. Charge the tablet fully once using the original Acer adapter and fast charging will re-enable on the next session.

Compatible Models

Iconia One 10 B3-A40

Replaces Part Numbers

PR-279594N PR-279594N(1ICP3/95/94-2)

Technical Specifications

Voltage3.7V
Amp Hours6000mAh
Capacity6000mAh
Rate22.2Wh
Net Weight111.5g /3.93 oz
Gross Weight251.5g /8.87 oz
Approximate Weight251.5g /8.87 oz
Dimension 190.40 x 99.30 x 3.10mm

Product Highlights

  • Brand: Acer
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Acer B3-A40 shows 60% battery right after a full charge — is the new battery faulty?

The fuel gauge IC is still calibrated to the old cell's discharge curve, so the percentage reading drifts immediately after a swap. The new cell is not faulty. Run one complete discharge to automatic shutoff, then charge uninterrupted to 100% without unplugging early. That single cycle re-maps the curve against the new cell and the percentage display stabilises from there.

The B3-A40 tablet gets noticeably warm while charging with the replacement battery — should I stop?

Some warmth during the constant-current phase is normal when a charge IC is running its first full cycle on a new cell. The BMS monitors cell temperature and will interrupt charging if it crosses a safe threshold. If the tablet becomes hot to the touch or charging stops repeatedly before 100%, check that the area around the tablet is ventilated and not resting on a soft surface. A surface temperature above roughly 45°C during charging is the point to investigate further.

Battery percentage drops fast from 100% but then slows down — why does this happen on the B3-A40?

This is fuel gauge drift caused by the IC mapping a discharge curve it learned from the degraded original cell. The new cell has a different voltage-to-capacity curve, so the early percentage steps appear larger than they should. It corrects itself after one full calibration cycle — discharge the tablet to automatic shutoff, then charge to 100% in one uninterrupted session. After that cycle the percentage steps should track evenly across the full range.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.