Apple A2925 iPad Pro 12.9" Replacement Battery 10200mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Apple A2925 iPad Pro 12.9" Replacement Battery 10200mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Apple A2925 iPad Pro 12.9" Replacement Battery 10200mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.82V
Amp
10200mAh
Apple iPad Pro 13-inch (2024) — 3.82V Li-Polymer Replacement Battery (0099S / 661-43535)
This is a 3.82V, 10200mAh Li-Polymer battery for the Apple iPad Pro 13-inch (2024), covering fit models A2925, A2926, and A3007. It replaces the original cell when charge capacity has dropped or the battery has failed outright. Install restores the full power budget the display, Apple M-series chip, and wireless radios draw from.
- A2925 / A2926 / A3007 platform fit: All three model numbers share the same enclosure geometry, battery connector pinout, and BMS handshake protocol — one cell covers the entire 2024 13-inch iPad Pro lineup without modification.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on a 2024 iPad Pro 13-inch. The BMS accepted the charge IC negotiation without fault flags, and capacity reporting stabilised after one full cycle.
- Fuel gauge IC recalibration after swap: After installation, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without interruption. This single full cycle resets the fuel gauge IC against the new cell's actual capacity curve and clears the inaccurate percentage readings that appear immediately after a swap.
iPad Pro shutting down at 15–25% battery remaining
The 2024 iPad Pro's combined display and WiFi load creates a brief high-current draw that can push cell voltage below the BMS cutoff threshold — even when the reported percentage still shows charge remaining. The fuel gauge is reading state-of-charge from a calibration curve mapped to the old cell, so the numbers no longer reflect the new cell's actual voltage floor. Run one complete discharge to automatic shutoff followed by an uninterrupted charge to 100%. After that cycle the gauge recalibrates and shutoffs at low percentage stop occurring.
USB-PD fast charging not available after battery replacement
iPadOS withholds USB Power Delivery negotiation on a freshly swapped cell until the charge IC has completed at least one accepted charge cycle. Until that cycle completes, the tablet draws at standard 5V rather than stepping up to the 9V or higher PD profile. Plug into a USB-PD charger and let the tablet charge fully to 100% without interruption. Fast charge becomes available on the next charge session once the IC logs a successful full cycle against the new cell.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Apple
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My iPad Pro 13 shows 80% charge right after a battery swap, then jumps to a completely different number — what's happening?
The fuel gauge IC is still running a calibration curve mapped to the old cell, so the percentage it reports against the new cell's voltage is inaccurate from the start. We saw the same drift on the bench — readings stabilised only after a full cycle. Run the tablet down to automatic shutoff, then charge uninterrupted to 100%. After that single cycle the gauge recalibrates and the percentage display tracks correctly.
The iPad Pro keeps cutting off at around 20% after the new battery goes in — is the replacement faulty?
It is not a faulty cell. The BMS cutoff is tripping because the fuel gauge is still calibrated to the old cell's voltage curve, so the reported 20% does not match the new cell's actual remaining voltage under load. The display and wireless radios together draw enough current to briefly sag voltage below the cutoff point before the gauge catches up. Do one full discharge to automatic shutoff followed by a full uninterrupted charge to 100%, and the early shutoffs stop.
Fast charging stopped working after I replaced the battery on my iPad Pro 13 — my charger worked fine before the swap.
iPadOS blocks USB Power Delivery negotiation on a new cell until the charge IC logs one complete accepted charge cycle. Until then the tablet pulls only the standard 5V rate regardless of what the charger can deliver. Connect to the same USB-PD charger and let it charge all the way to 100% without interruption. Fast charge resumes on the following charge session once that first full cycle is recorded.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
