Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Bose Soundlink Revolve+ 7.4V Compatible Battery 745531-0010

Up to 20% off
New arrival
Sale priceFrom $44.99 USD Regular price $55.99
Shipping calculated at checkout.
Replaces Bose Soundlink Revolve+ and Revolve Plus models with OEM part number 745531-0010.
7.4V 2600mAh cell delivers 19.24Wh — restores full 360-degree audio output on the Revolve+ without voltage sag during wireless streaming.
Connector seats into the battery slot with a single locking tab; orientation marked on the pack and housing.
Bench testing on the Revolve+ platform showed clean BMS handshake on first insertion with no fault code or delayed acceptance.
On first use, discharge the speaker fully before the first recharge cycle — the Bose fuel gauge locks calibration after initial power-up and shallow cycling afterward causes early shutdown at 30% remaining capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.4V

Amp

2600mAh

Bose SoundLink Revolve+ — 7.4V Li-ion Replacement Battery (745531-0010)

This 7.4V 2600mAh Li-ion battery replaces part number 745531-0010 in the Bose SoundLink Revolve+ and Revolve+ 2 portable Bluetooth speakers. It fits models 071478 and the Soundlink Revolve Plus across both generations. Voltage and cell format match the original pack exactly.

  • Revolve+ and Revolve+ 2 compatibility: Both generations share the same 7.4V cell configuration, connector pinout, and BMS handshake protocol. The fuel gauge and protection circuit communication remain identical between the two, so one battery covers both platforms without any hardware modification.
  • Bench tested on actual hardware: We ran this pack on a SoundLink Revolve+ at high volume, cycling the amplifier and Bluetooth radio simultaneously. The BMS held stable under combined draw peaks and did not trip during the current spikes typical of loud playback bursts.
  • Monthly discharge cycle on daily-use speakers: If the Revolve+ sits on a desk and gets topped off before dropping below 50%, the fuel gauge drifts over time. Let the battery drop below 20% at least once a month before recharging to keep the cell calibration accurate and slow capacity fade.

Bluetooth dropping at high volume on the Revolve+

At maximum volume, the amplifier and Bluetooth radio draw current simultaneously. On a worn or deeply discharged pack, combined load causes voltage sag that briefly pulls cell voltage below the radio module's operating threshold. The Bluetooth stack interprets this as a signal fault and drops the connection. A fresh 2600mAh pack maintains the voltage headroom needed to supply both loads at once without sagging into cutoff territory.

Speaker won't wake from USB charging after sitting discharged for weeks

If the Revolve+ sits unused for an extended period, the cell can discharge below the minimum acceptance voltage for USB-C power delivery — typically around 2.5V per cell. The charger handshake fails because the BMS blocks charge input to protect the cell. Connect the USB-C cable and leave it undisturbed for 15–20 minutes. The BMS on this pack includes a low-voltage recovery mode that allows a trickle pre-charge to bring the cell back above 3.0V before switching to normal CC/CV charge.

Compatible Models

Soundlink Revolve+ Soundlink Revolve Plus 071478 Soundlink Revolve+ 2 Soundlink Revolve Plus 2

Replaces Part Numbers

745531-0010

Technical Specifications

Voltage7.4V
Amp Hours2600mAh
Capacity2600mAh
Rate19.24Wh
Net Weight133.5g /4.71 oz
Gross Weight203.5g /7.18 oz
Approximate Weight203.5g /7.18 oz
Dimension 76.80 x 67.40 x 36.26mm

Product Highlights

  • Brand: Bose
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Revolve+ shows a full battery indicator but audio cuts out after about an hour of use — is the new battery going to fix this?

That symptom is fuel gauge drift, not a failing cell. Shallow cycling — charging the speaker before it drops below 50% — causes the battery management system to lose accurate track of true capacity. A replacement pack resets this, but the drift will return if the same charging habit continues. After fitting the new battery, let it discharge below 20% before the first recharge to give the BMS a full calibration cycle.

The audio distorts and sounds clipped before the battery indicator even reaches empty — what's causing that?

This is voltage sag under amplifier load, not a software or speaker fault. As the cell depletes, internal resistance rises and voltage drops under the amplifier's current draw — the amp clips the signal before the BMS triggers a low-battery cutoff. A fresh 2600mAh cell has lower internal resistance and holds voltage more consistently across the discharge curve. If distortion still appears early after fitting the new battery, check that the speaker firmware is current, as Bose has released updates that adjust the amplifier's low-voltage behaviour.

The Revolve+ gets noticeably warm during long listening sessions — is that a problem with the battery or the speaker itself?

Both the amplifier and the discharging Li-ion cell generate heat, and the fabric housing traps it. Some warmth is normal. The concern is if the housing becomes hot to the touch — that indicates the BMS thermal protection is working harder than it should, usually from extended high-volume use in a warm room. Keep the speaker out of direct sunlight during playback and avoid placing it on soft surfaces like cushions that block the base vent. If the unit shuts down mid-session, let it cool for ten minutes before restarting.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.