Huawei Enjoy 7 Plus Replacement Battery HB406689ECW 3.85V 3900mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Huawei Enjoy 7 Plus Replacement Battery HB406689ECW 3.85V 3900mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Huawei Enjoy 7 Plus Replacement Battery HB406689ECW 3.85V 3900mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.85V
Amp
3900mAh
Huawei Enjoy 7 Plus — 3.85V Li-Polymer Replacement Battery (HB406689ECW)
This is a 3900mAh Li-Polymer cell rated at 3.85V, built to replace the original HB406689ECW / HB396689ECW battery in the Huawei Enjoy 7 Plus. It fits the standard TRT-AL00A chassis, including Dual SIM and TD-LTE variants. Dimensions are 86.60 × 66.20 × 3.80mm — same footprint as the factory cell.
- TRT-AL00A platform fit: The Enjoy 7 Plus and its Dual SIM variants share the same battery bay geometry, connector pinout, and BMS handshake protocol. Both HB406689ECW and HB396689ECW part numbers reference the same cell specification, so this replacement covers the full TRT-series lineup without modification.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the TRT-AL00A board. The BMS accepted the handshake without error flags, charge termination triggered correctly at 4.35V, and the protection circuit responded to simulated over-current events within spec.
- Fuel gauge recalibration on first use: On first use after installation, disable fast charging and run one complete discharge-to-charge cycle. The fuel gauge IC on this platform calibrates its coulomb counter against the new cell's discharge curve — skipping this step causes the OS to display inaccurate percentages for several days.
Sudden shutdown at 20–30% on the Enjoy 7 Plus
An aged cell develops higher internal impedance. Under peak load — active modem, GPS, or screen at full brightness — terminal voltage drops sharply even when the reported state of charge looks healthy. The phone's hardware protection reads a voltage cliff and shuts down before the OS can log a low-battery event. A fresh cell with lower impedance sustains voltage under the same load, so the shutdown threshold is never triggered. After fitting this replacement, run one full discharge cycle before judging percentage accuracy.
Phone will not power on after sitting in storage
Li-Polymer cells that discharge below roughly 2.5V per cell trigger a BMS lockout — the protection circuit opens to prevent damage, and the phone appears completely dead. Plug in a charger and leave it connected for 15–20 minutes without pressing the power button; the charge IC trickle-charges the cell back above the lockout threshold before the BMS resets. Once voltage recovers above 3.0V, the BMS closes the circuit and normal charging resumes. If the screen shows no response after 30 minutes on charge, verify the cable and adapter are delivering at least 5V 1A.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Huawei
- Manufacturer: CS
- Series: X-Longer
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Enjoy 7 Plus shows wrong battery percentage after I put in the new battery — is that normal?
Yes, and it corrects itself. The fuel gauge IC on this phone stores a discharge curve calibrated to your old, degraded cell. After a cell swap, the coulomb counter is mapping against the wrong reference, so reported percentage drifts or jumps. Run one full discharge — use the phone until it shuts off automatically — then charge uninterrupted to 100% with fast charging disabled. The IC resets its calibration after that cycle and percentage readings stabilise.
Fast charging stopped working the first time I charged the replacement battery — what's wrong?
The Huawei charge protocol requires a BMS handshake before the charge IC ramps up current. On the first cycle with a new cell, the IC defaults to standard 5V charging while it verifies the BMS response. Disconnect the cable, power the phone off completely, then reconnect. If fast charge still does not engage, complete one full slow-charge cycle first — the handshake on this platform sometimes requires the BMS to register one completed charge event before accepting the high-current negotiation.
My Enjoy 7 Plus feels warm near the battery while charging the new cell — should I be concerned?
Mild warmth on the first few charge cycles is expected. A new Li-Polymer cell has slightly higher impedance than a broken-in cell, so the charge IC dissipates a little more heat as it pushes current in. Warmth that makes the back panel uncomfortable to hold — above roughly 40°C — is not normal. If that happens, check that the charger output is 5V and that you are not running processor-intensive apps during the charge. Normal temperature should settle by the third or fourth full charge cycle.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




