Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Panasonic VW-VBD120 7.4V Replacement Battery NV-GS10

Up to 20% off
New arrival
Sale priceFrom $29.99 USD Regular price $36.99
Shipping calculated at checkout.
Fits Panasonic NV-GS10, NV-GS10B, NV-GS10EG camcorders; replaces VW-VBD120, CGA-DU12, CGA-DU12A/1B battery packs.
7.4V, 1050mAh capacity delivers runtime for standard MiniDV recording sessions on this compact camcorder platform.
Connector slides straight into the side battery slot with a single locking tab; orientation marked on the pack.
We bench-tested this cell on the NV-GS10 charging circuit; BMS accepted the new pack within one full charge cycle.
First charge in the camcorder body itself, not an external charger—the NV-GS10 firmware updates battery-fuel gauging after the initial full cycle.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.4V

Amp

1050mAh

Panasonic NV-GS10 Series — 7.4V Li-ion Replacement Battery (VW-VBD120)

This 7.4V, 1050mAh Li-ion cell replaces the VW-VBD120 (also cross-referenced as CGA-DU12 and CGA-DU12A/1B) in Panasonic NV-GS10 series MiniDV camcorders. It fits the NV-GS10, NV-GS10B, NV-GS10EG, NV-GS10EGA, and over 140 additional compatible models. The cell slots into the same battery bay and connects via the same multi-pin interface as the original.

  • NV-GS10 series compatibility: These models share a common 7.4V battery rail, identical mechanical footprint, and the same BMS communication protocol — which is why one part number covers the full range without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on NV-GS10 series hardware. The BMS accepted the cell without error flags, and the protection circuit responded correctly to over-discharge and over-temperature conditions.
  • First-use charge cycle on the NV-GS10: Insert the new cell and run a full charge cycle through the OEM charger or directly in the camcorder body before your first shoot. The NV-GS10's BMS uses that initial cycle to calibrate its battery-remaining indicator — skipping it can cause erratic percentage readings on screen.

Why the NV-GS10 shows a dead battery indicator on a partially charged replacement cell

The NV-GS10 maps its battery-remaining display to a voltage-threshold table set for the original Panasonic cell's specific discharge curve. A new third-party cell can have a slightly different discharge profile, causing the camera to misread the actual state of charge at mid-range voltages. This shows up as a sudden drop to one bar — or a solid dead battery icon — even when the cell still holds usable charge. The fix is a full charge-to-discharge calibration cycle: charge fully, record until the camera shuts down, then recharge. After one or two full cycles, the indicator settles to a more accurate reading.

NV-GS10 not recognising the replacement cell on first install

Some NV-GS10 units perform a BMS handshake on every battery insertion and will briefly display a no-battery or incompatible warning if the cell voltage is below the camera's acceptance threshold — typically under 6.8V. Replacement cells are shipped in a partial-charge storage state and can sit below that threshold. Remove the battery, place it in the OEM charger for 15–20 minutes to bring it above 7.0V, then reinsert. The camera should recognise it immediately at that point.

Compatible Models

NV-GS10 NV-GS10B NV-GS10EG NV-GS10EGA NV-GS10EGR NV-GS10EGS NV-GS17 NV-GS21 NV-GS22 NV-GS22EG-A NV-GS22EG-S NV-GS27 NV-GS28GK NV-GS30 NV-GS30B NV-GS33 NV-GS33EG-S NV-GS35 NV-GS37 NV-GS38GK NV-GS40 NV-GS40B NV-GS44 NV-GS50 NV-GS50A NV-GS50AW NV-GS50A-S NV-GS50B NV-GS50K NV-GS50V NV-GS55 NV-GS55B NV-GS55EG-S NV-GS55K NV-GS55GN-S NV-GS65 NV-GS70 NV-GS70A-S NV-GS70B NV-GS70K NV-GS75 NV-GS75B NV-GS75EG-S NV-GS78GK NV-GS100K NV-GS120 NV-GS120B NV-GS120EG-S NV-GS120GN-S NV-GS120K NV-GS140 NV-GS140EG-S NV-GS150 NV-GS150B NV-GS150EG-S NV-GS158GK NV-GS180 NV-GS200 NV-GS200B NV-GS200EG-S NV-GS200K NV-GS250 NV-GS250B NV-GS250EG-S NV-GS258GK NV-GS280 NV-GS300 NV-GS400 NV-GS400B NV-GS400GN NV-GS400EG-S NV-GS400K NV-GS408GK NV-GS500 NV-MX500A PV-GS19 PV-GS29 PV-GS31 PV-GS33 PV-GS34 PV-GS35 PV-GS39 PV-GS50 PV-GS50K PV-GS50S PV-GS55 PV-GS59 PV-GS65 PV-GS70 PV-GS75 PV-GS120 PV-GS150 PV-GS180 PV-GS200 PV-GS250 PV-GS300 PV-GS400 VDR-D150 VDR-D158GK VDR-D250 VDR-D258GK VDR-D300 VDR-D308GK VDR-M30 VDR-M30K VDR-M50 VDR-M50B VDR-M50EG-S VDR-M53 VDR-M55 VDR-M70 VDR-M70B VDR-M70EG-S VDR-M70K VDR-M75 VDR-M95 DZ-MV350 DZ-MV350A DZ-MV350E DZ-MV380 DZ-MV380A DZ-MV380E DZ-MV550 DZ-MV550A DZ-MV550E DZ-MV580 DZ-MV580A DZ-MV580E DZ-MV730 DZ-MV730E DZ-MV750 DZ-MV750E DZ-MV780 DZ-MV780A DZ-MV780E DZ-MV780R DZ-MV780S DZ-GX20 DZ-GX20A DZ-GX20E DZ-GX25 DZ-GX25M DZ-GX3000 DZ-GX3100 DZ-GX3200 DZ-GX3300(S) DZ-GX3300(B)

Replaces Part Numbers

VW-VBD120 CGA-DU12 CGA-DU12A/1B

Technical Specifications

Voltage7.4V
Amp Hours1050mAh
Capacity1050mAh
Rate7.77Wh
Net Weight54g /1.90 oz
Gross Weight124g /4.37 oz
Approximate Weight124g /4.37 oz
Dimension 41.34 x 36.19 x 25.86mm

Product Highlights

  • Brand: Panasonic
  • Manufacturer: CS
  • Series: Standard
  • Color: Dark Grey
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The NV-GS10 battery percentage is jumping around — showing 80%, then dropping to 20% a minute later. Is the replacement cell faulty?

This is a calibration issue, not a faulty cell. The NV-GS10's indicator maps voltage thresholds to percentage steps, and a new cell's discharge curve doesn't perfectly match the original Panasonic cell the camera was calibrated against. Run one full cycle — charge completely, then record until the camera powers off automatically. Recharge fully after that and the percentage display should track steadily.

The NV-GS10 powers on fine but shuts down unexpectedly during recording — not a low battery warning, just a hard cut.

This points to a voltage sag triggering the under-voltage protection in the BMS. During sustained recording the NV-GS10 draws harder on the cell — running the CCD sensor, image stabilisation, and LCD simultaneously — and a new cell that hasn't completed a conditioning cycle can sag below the BMS cutoff threshold briefly under that combined load. Charge the cell fully, run one complete discharge cycle through normal recording use, then recharge. After conditioning, sag under combined load drops and the premature shutdowns stop.

My NV-GS10 battery drains noticeably faster in cold weather than it did in summer — is this a defective cell?

Cold reduces Li-ion cell capacity temporarily — at around 5°C the NV-GS10's 1050mAh cell can deliver noticeably less usable charge before voltage drops to the BMS cutoff point. This is a chemistry characteristic, not a defect. Keep the spare battery in an inside jacket pocket between shots to hold it near body temperature. Capacity returns to rated levels once the cell warms back to room temperature.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.