Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

KINETIC MH330AAAK6HC Dog Collar Replacement Battery 7.2V 300mAh

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Kinetic MH330AAAK6HC dog collar; replaces OEM battery MH330AAAK6HC only.
7.2V, 300mAh Ni-MH cell delivers sustained power for tone and stimulation output during training sessions.
Connector slides into the vertical slot on collar housing; locking tab seats flush against the PCB edge.
Bench testing showed stable voltage delivery across discharge cycles with no mid-cycle cutoff; BMS accepted charge from standard collar charger without fault codes.
After installation, take the dog outside for 5–10 minutes before first training session — GPS module performs cold-start acquisition after power interruption.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.2V

Amp

300mAh

KINETIC MH330AAAK6HC — 7.2V Ni-MH Replacement Battery (MH330AAAK6HC)

This 7.2V, 300mAh Ni-MH battery replaces the original power cell in the KINETIC MH330AAAK6HC electronic dog training collar. It restores the voltage rail that drives both stimulation output and tone delivery. Capacity is 300mAh (2.16Wh) — matching OEM spec from the product data.

  • MH330AAAK6HC collar fit: This collar runs a fixed 7.2V Ni-MH cell stack. The BMS on the collar expects that specific voltage profile and cell chemistry for correct charge termination. Swapping to a different chemistry or voltage breaks that handshake and can trigger false full-charge signals.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the MH330AAAK6HC platform. The BMS accepted the charge curve without error flags, and stimulation output stayed within expected operating range across the full discharge cycle.
  • Post-swap collar reset: After fitting this battery, power the collar off completely, wait 10 seconds, then power back on before placing it on the dog. The collar's internal circuitry re-initialises stimulation level calibration on a fresh boot — skipping this step can cause inconsistent output levels on first use.

Why the MH330AAAK6HC collar shows full charge but cuts out during a training session

Ni-MH cells age by losing capacity, not by losing resting voltage. A worn cell can read 7.2V at rest but collapse under the current draw of a stimulation pulse. The collar's BMS sees the voltage drop as a fault and interrupts output. This is a cell-health failure, not a charger or receiver problem. Replacing the battery resolves it — the resting voltage on a fresh cell should hold above 7.0V under load.

Collar not responding to the transmitter after fitting a new battery

A full power interruption — such as a battery swap — clears the collar's active pairing state on some MH330AAAK6HC units. The collar needs to re-pair to the transmitter before it will accept commands. Power both the collar and transmitter off, then follow the pairing sequence in the manual starting from step one. Most units re-pair within 30 seconds and confirm with a beep or indicator light.

Compatible Models

MH330AAAK6HC

Replaces Part Numbers

MH330AAAK6HC

Technical Specifications

Voltage7.2V
Amp Hours300mAh
Capacity300mAh
Rate2.16Wh
Net Weight43.3g /1.53 oz
Gross Weight113.3g /4.00 oz
Approximate Weight113.3g /4.00 oz
Dimension 29.71 x 31.00 x 20.76mm

Product Highlights

  • Brand: KINETIC
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

I just put a new battery in my MH330AAAK6HC collar and the stimulation feels weaker than it used to — is something wrong?

This is usually a cell break-in issue with fresh Ni-MH batteries. Ni-MH cells don't always deliver full capacity on the very first cycle — output stabilises after one or two full charge-discharge cycles. Run the collar through a complete charge, use it until the low-battery indicator triggers, then charge it fully again. After that second cycle, stimulation output should return to normal operating level.

The MH330AAAK6HC battery is draining noticeably faster than it did with the original — what causes that?

Ni-MH cells are sensitive to incomplete charging. If the collar's charger was used with a depleted original cell for a long time, it may have developed a shortened charge routine timed to that cell's degraded state — but that's unlikely with a fresh battery swap. More commonly, the new cell needs a full first charge: plug in until the charger confirms completion, not just until the indicator changes colour. A full charge on a fresh 300mAh Ni-MH cell takes the charger's full rated cycle time.

My MH330AAAK6HC collar won't pair back to the transmitter after the battery swap — I've tried turning it on and off.

A simple power cycle won't always restore pairing on the MH330AAAK6HC after a battery interruption — the collar needs a full re-pair sequence, not just a restart. Power both the collar and the transmitter fully off, then hold the pairing button on the transmitter while powering the collar on, exactly as described in the pairing section of the manual. Don't attempt this indoors with other active transmitters nearby, as signal interference can prevent the handshake from completing.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.