Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Kobo Glo HD Replacement Battery 3.7V 1500mAh Li-Polymer

Up to 21% off
New arrival
Sale priceFrom $24.99 USD Regular price $30.99
Shipping calculated at checkout.
Fits Kobo Glo HD, Aura, and H2O e-readers with 3.7V lithium-polymer chemistry.
3.7V, 1500mAh capacity delivers weeks of reading per charge on e-ink display.
Connector slides into the battery slot with a locking tab; orientation marked on housing.
We bench-tested this cell in a Glo HD at room temperature — BMS accepted the charge without fault codes and held stable voltage under page-turn cycles.
After installation, connect USB-C and charge fully before reading — Kobo firmware recalibrates battery percentage display after a cell swap and requires a complete charge cycle to sync correctly.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1500mAh

Kobo Glo HD / Aura / H2O — 3.7V Li-Polymer Replacement Battery

This 3.7V, 1500mAh lithium-polymer cell replaces the original battery in the Kobo Glo HD, Aura, and H2O e-readers. All three models use the same physical cell format and connector — 84.15 × 49.50 × 2.70mm — so one part covers the full range. Swap it in when the original no longer holds a usable charge between reading sessions.

  • Glo HD, Aura, and H2O compatibility: These three Kobo models share an identical battery footprint, connector pitch, and BMS voltage thresholds. The same cell works across all three without any modification to the flex cable or housing.
  • Bench tested on actual hardware: We ran this cell on the Glo HD platform and confirmed the BMS accepted the cell without a fault flag, backlight control remained stable across brightness levels, and charge termination triggered correctly at 4.2V.
  • Post-swap charge cycle on Kobo firmware: After installing, connect via USB and let the device charge to 100% before use. Kobo firmware recalibrates the battery percentage display only after a complete charge cycle — skipping this step causes the indicator to read inaccurately for days.

Kobo Glo HD not powering on after battery swap

Replacement cells ship at storage voltage — typically 3.6V to 3.85V — which can fall below the Kobo bootloader's minimum startup threshold. The device will appear completely dead even though the cell is functional. Connect the USB cable immediately after installation and leave it on charge for at least 10 minutes before pressing the power button. Once the cell clears approximately 3.7V under USB input, the bootloader initialises normally.

Battery percentage jumping or freezing after cell replacement

Kobo firmware stores discharge curve data calibrated to the original cell. A new cell has no matching history, so the percentage gauge reads from stale data until it recalibrates. You will see the indicator jump — sometimes dropping 20% suddenly or sticking at one number for extended use. Run two full charge-to-discharge cycles and the firmware rewrites the curve to match the new cell's actual behaviour.

Compatible Models

Glo HD Aura H2O

Technical Specifications

Voltage3.7V
Amp Hours1500mAh
Capacity1500mAh
Rate5.55Wh
Net Weight25g /0.88 oz
Gross Weight75g /2.65 oz
Approximate Weight75g /2.65 oz
Dimension 84.15 x 49.50 x 2.70mm

Product Highlights

  • Brand: Kobo
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Kobo Glo HD shows a low battery warning the moment it boots after fitting the new cell — is the replacement faulty?

It is not faulty. Replacement Li-Polymer cells ship at reduced storage voltage, and Kobo firmware displays a low battery warning any time the cell reads below roughly 3.7V on startup. Plug the device into USB immediately and let it charge without interruption to 100%. The warning clears once the cell reaches operating voltage and the firmware registers a full charge.

Page turns on my Kobo feel sluggish after the battery swap — what causes that?

E-ink displays require a voltage spike to refresh each page. When cell voltage sags — even briefly — the controller slows the refresh cycle to stay within safe limits, and page turns feel delayed. This is most noticeable in the first few uses before the new cell has been through a full charge cycle. Charge to 100% and complete one full discharge before drawing conclusions about refresh speed.

WiFi sync is draining my Kobo's new battery far faster than reading alone — is that normal?

Yes, and the gap is significant. The WiFi radio draws roughly 10 to 15 times more current than the e-ink display during normal reading. The Glo HD's low-power display can run for extended periods with the radio off, but repeated syncs or leaving WiFi on in standby substantially shortens each charge. Set the device to sync on demand rather than automatically, and switch WiFi off between sessions to reduce that draw.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.