JMS OT-701 Replacement Battery 10.8V 3000mAh Ni-MH 9N-1200SCK
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
JMS OT-701 Replacement Battery 10.8V 3000mAh Ni-MH 9N-1200SCK - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
JMS OT-701 Replacement Battery 10.8V 3000mAh Ni-MH 9N-1200SCK - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
3000mAh
JMS OT-701 Infusion Pump — 10.8V Ni-MH Replacement Battery (9N-1200SCK)
This 10.8V 3000mAh Ni-MH battery replaces the OEM 9N-1200SCK in JMS infusion pump models OT-701, OT-707, and OT-601. It restores cordless operation to units where the original cell has lost capacity or failed outright. Voltage and capacity match the OEM specification exactly — 10.8V, 3000mAh (32.4Wh).
- OT-701, OT-707, and OT-601 fitment: These three models share the same battery bay geometry, connector pinout, and BMS communication protocol, which is why one cell covers all three. The 9N-1200SCK form factor fits all variants without modification.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on the OT-701 platform. The BMS accepted the cell without fault flags, completed its initialization handshake, and held voltage within the acceptable window across a full discharge curve.
- Post-installation self-test protocol: After fitting this battery, allow the infusion pump to complete its full power-on self-test without interruption. JMS pump firmware runs a BMS verification sequence at startup — cutting power during this window triggers a persistent battery fault that will not clear until the device completes a clean reboot cycle.
Device not completing boot sequence on first use with a new battery
The JMS OT-701's BMS runs a chemistry verification check at startup. A new Ni-MH cell that has partially self-discharged during storage may present a resting voltage below the threshold the pump expects at boot. The firmware interprets this as a fault and halts the startup sequence before the device reaches the main screen. Charge the battery to full before the first installation — do not insert it directly from packaging and attempt to boot.
Low battery alarm triggering immediately after a confirmed full charge
This happens because the OT-701's BMS compares internal resistance readings against thresholds calibrated for a conditioned cell. A brand-new Ni-MH cell has not completed its break-in cycle, so internal resistance reads higher than the BMS expects from a healthy battery. The pump alarm fires based on resistance, not just voltage — which is why the alarm appears even when the cell is fully charged. Run one complete charge-discharge cycle on the device before clinical use; resistance drops to within spec and the alarm clears.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: JMS
- Manufacturer: CS
- Series: Standard
- Color: Blue
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The OT-701 shuts off unexpectedly during an infusion run — could the new battery be causing this?
Yes, and it is expected in the first several cycles. New Ni-MH cells have higher internal resistance, and the OT-701's load profile during an active infusion draw stresses a fresh cell harder than a conditioned one. The BMS reads a voltage sag under load and trips a protective cutoff before the cell is actually depleted. Run five to ten full charge-discharge cycles on the bench before putting the pump back into clinical rotation — internal resistance drops and the cutoff threshold stabilises.
The charge indicator on the OT-701 won't reach 100% on the first charge — is something wrong?
Nothing is wrong. The OT-701 charge IC applies a conservative current limit when it detects a new or recently recovered Ni-MH cell, and the charge algorithm terminates early on the first pass to avoid overheating an unconditioned pack. The display cap is a firmware behaviour, not a capacity shortfall. Cycle the battery fully once — charge to termination, discharge through normal device use, then recharge — and the indicator will reach 100% on the second charge.
The OT-701 shows a battery fault after a swap, but the cell is fully charged — how do I clear it?
This is a BMS learn-cycle fault, not a hardware failure. The pump's BMS stores capacity and resistance parameters from the previous cell, and when a new cell presents different characteristics, the firmware flags a mismatch. Power the device off completely, leave it unpowered for 30 seconds, then restart and allow the full boot sequence to complete without interruption. The BMS re-initialises against the new cell's readings and the fault clears — if it does not, run one full charge-discharge cycle and reboot again.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






