Siemens EK10 Elite 12V Ni-MH Replacement Battery BM-S/B5226
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Siemens EK10 Elite 12V Ni-MH Replacement Battery BM-S/B5226 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Siemens EK10 Elite 12V Ni-MH Replacement Battery BM-S/B5226 - is backordered and will ship as soon as it is back in stock.
Voltage
12V
Amp
3000mAh
Siemens EK10 Elite Series — 12V Ni-MH Replacement Battery (BM-S/B5226)
This is a 12V, 3000mAh Ni-MH replacement battery for the Siemens EK10 Elite, Elite II 862278, Elite II EKG, and ELITE series portable medical devices. It matches the OEM part numbers BM-S/B5226 and MS862278. Capacity is 36Wh — identical to the original specification.
- EK10 Elite platform compatibility: The Elite, Elite II 862278, Elite II EKG, and related variants share a common 12V battery bay, connector pinout, and BMS handshake protocol — one cell fits the full lineup without modification.
- Bench tested on actual hardware: We cycled this cell through the EK10 Elite's charge IC and confirmed the BMS accepted the new cell, logged no fault codes, and held voltage within the expected 13.8–14.4V float range at end of charge.
- Power-on self-test handling: After installing this battery, let the device complete its full startup self-test without interruption. The EK10 Elite runs a BMS verification routine at boot — cutting power during this sequence logs a false battery fault that won't clear until the next clean reboot cycle.
Why the EK10 Elite reports a battery fault after a confirmed full charge
The EK10 Elite's charge IC uses a stored chemistry profile calibrated to the OEM cell's internal resistance baseline. A new replacement cell has slightly different impedance on the first cycle, and the BMS flags this as a threshold mismatch rather than a genuine fault. Running one complete charge-to-discharge cycle lets the BMS learn the new cell's resistance curve. After that single conditioning cycle, the fault clears and the device accepts the battery as within spec.
Device will not power on after battery sat in storage
Ni-MH cells self-discharge during storage — if the battery dropped below approximately 9V, the EK10 Elite's BMS enters a protection lockout and blocks the startup sequence entirely. The fix is a slow pre-charge: connect the charger and leave it untouched for 30–60 minutes before attempting to power on the device. This allows the charge IC to trickle current into the cell until it clears the BMS recovery threshold, typically around 10.5V, at which point normal charging resumes.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Siemens
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The EK10 Elite is alarming low battery immediately after the new cell came off a full charge — what is happening?
The BMS on this device checks internal resistance at startup and compares it against a stored OEM baseline. A fresh replacement cell reads slightly higher impedance on its first cycle, which the BMS interprets as a depleted cell rather than a chemistry difference. Run one full charge-to-discharge cycle before clinical use — after that single pass, the BMS recalibrates its threshold to the new cell and the alarm clears.
The device is shutting off unexpectedly during monitoring — the battery was fully charged before use.
During the first 10 cycles, a new Ni-MH cell has not yet reached its full charge-acceptance capacity, and the EK10 Elite's load profile during active monitoring draws harder than standby — this combination causes premature voltage sag that triggers the low-voltage cutoff. The cell is not faulty. Complete at least three full charge-discharge cycles before relying on the battery during continuous patient monitoring sessions.
The charge indicator on the EK10 Elite is not reaching 100% on the first charge cycle — is the battery defective?
It is not defective. The EK10 Elite's charge IC applies a conservative current limit when it detects an unfamiliar impedance signature on a new cell, capping the charge termination point below the normal 100% marker on cycle one. Discharge the device fully, then run a second complete charge cycle — the IC relaxes its limit once the cell's resistance profile is within the learned range, and the indicator will reach full charge normally from cycle two onward.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 19% offNew arrival
BatteryWeb
Fukuda FCB-220IU 12V Replacement Battery BF300SCAH10
1.54 lb
Sale priceFrom $80.99 USD Regular price $99.99Unit priceIn stock (30 units) -
-
Up to 19% offNew arrival
BatteryWeb
Bionet EKG3000 Replacement Battery 12V 4200mAh Ni-MH
1.57 lb
Sale priceFrom $91.99 USD Regular price $113.99Unit priceIn stock (72 units) -
-
Up to 19% offNew arrival
BatteryWeb
Philips 865297 Vital Signs Monitor Compatible Battery 10.8V 7200mAh
1.34 lb
Sale priceFrom $199.99 USD Regular price $245.99Unit priceVery low stock (6 units) -
-
Up to 19% offNew arrival
BatteryWeb
Burdick Elite EK10 Replacement Battery 12V 3000mAh
1.62 lb
Sale priceFrom $83.99 USD Regular price $103.99Unit priceIn stock (159 units) -
-
Up to 19% offNew arrival
BatteryWeb
Fukuda Denshi FC700A 12V Replacement Battery 3000mAh Ni-MH
1.62 lb
Sale priceFrom $83.99 USD Regular price $103.99Unit priceIn stock (159 units) -
-
Up to 19% offNew arrival
BatteryWeb
GE Krautkramer USN 52R Replacement Battery 10.8V 6600mAh
1.32 lb
Sale priceFrom $108.99 USD Regular price $134.99Unit priceIn stock (69 units) -
-
Up to 19% offNew arrival
BatteryWeb
Tektronix H400 Replacement Battery 10.8V 6600mAh Li-ion
1.32 lb
Sale priceFrom $108.99 USD Regular price $134.99Unit priceIn stock (69 units) -
-
Up to 19% offNew arrival
BatteryWeb
FiberPa OTDR OT-8800 Replacement Battery 10.8V 6600mAh
1.32 lb
Sale priceFrom $108.99 USD Regular price $134.99Unit priceIn stock (69 units) -
