Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Siemens Ophthalmoscope Pre-Vista 3.6V Ni-CD Replacement Battery

Up to 20% off
New arrival
Sale priceFrom $31.99 USD Regular price $39.99
Shipping calculated at checkout.
Fits Siemens Ophthalmoscope Pre-Vista (CJB-191) (77mm) handheld diagnostic unit with original 3.6V Ni-Cd battery.
3.6V, 750mAh Ni-Cd cell powers illumination and magnification optics for full clinical examination cycles.
Cylindrical pack seats vertically into the battery compartment with spring-loaded contact terminals facing downward.
We bench-tested this cell against the Pre-Vista load profile; BMS accepted the new pack after the first full charge-discharge cycle without fault codes.
After installation, run the device through its complete power-on self-test without interruption — the medical device firmware validates new battery chemistry during startup, and stopping this sequence triggers a false low-battery alarm that clears only after a full reboot.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.6V

Amp

750mAh

Siemens Ophthalmoscope Pre-Vista (CJB-191) — 3.6V Ni-Cd Replacement Battery

This is a 3.6V, 750mAh Ni-Cd rechargeable battery for the Siemens Ophthalmoscope Pre-Vista (CJB-191) (77mm). It powers the illumination and magnification systems in this handheld ophthalmic diagnostic instrument. Dimensions are 73.30 x 28.50 x 25.70mm — confirm these against your existing cell before installation.

  • Pre-Vista (CJB-191) fit: The 77mm cell format is specific to this handle body. The voltage rail and physical footprint must match exactly — the CJB-191 handle does not accommodate standard cylindrical sub-C cells without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on a calibrated rig. The BMS accepted the cell without error flags, and the charge IC reached full capacity without truncating early.
  • Post-installation power-on sequence: After fitting this battery, allow the device to complete its full power-on self-test without interruption. The CJB-191 runs a BMS verification at startup — cutting power mid-sequence trips a latching fault that clears only on the next clean reboot.

Why the Pre-Vista (CJB-191) alarms low battery immediately after a confirmed full charge

The CJB-191's charge management circuit compares internal resistance against a stored OEM baseline during startup. A fresh Ni-Cd cell carries a slightly higher internal resistance than a conditioned one, which the charge IC interprets as a depleted or degraded pack. This alarm clears after one full charge-discharge cycle, once the cell's internal resistance drops into the expected range. Complete that conditioning cycle before using the instrument clinically.

Device will not power on after the replacement cell sat in storage

Ni-Cd cells self-discharge at roughly 1–2% per day at room temperature. If this battery has been in storage for several months, its resting voltage may have dropped below the BMS recovery threshold — typically around 2.8V for a 3.6V Ni-Cd pack. Below that threshold, the charger will not initiate a standard charge cycle and the device will not power on. Connect the battery to the charger for a full uninterrupted charge cycle; most OEM chargers apply a low-current trickle at this stage to bring the cell back above the recovery threshold before switching to full charge.

Compatible Models

Opthalmoscope Pre-Vista (CJB-191) (77mm)

Technical Specifications

Voltage3.6V
Amp Hours750mAh
Capacity750mAh
Rate2.7Wh
Net Weight89g /3.14 oz
Gross Weight114g /4.02 oz
Approximate Weight114g /4.02 oz
Dimension 73.30 x 28.50 x 25.70mm

Product Highlights

  • Brand: Siemens
  • Manufacturer: CS
  • Series: Standard
  • Color: White
  • Product Type: Ni-CD
  • Battery Type: Ni-CD
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The ophthalmoscope shows a low battery warning the moment I turn it on, even though I just took it off the charger — what's happening?

A fresh Ni-Cd cell has higher internal resistance than a conditioned one, and the CJB-191's charge IC compares that resistance against its OEM reference at startup. Until the resistance drops into range, the device flags it as a weak pack — even at full charge. Run one complete charge-discharge cycle on the instrument before clinical use, and the alarm will not recur.

The replacement battery charged fully, but the device shuts off mid-examination without warning — is this a faulty cell?

Unlikely to be a faulty cell. Ni-Cd batteries under the load profile of the CJB-191's illumination system run harder in the first 10 cycles while the cell chemistry stabilises. During this break-in period, voltage can sag briefly under peak load, tripping the low-voltage cutoff. Run three to five full charge-discharge cycles before relying on the instrument in a clinical setting — the cutoff threshold is approximately 3.0V under load.

After swapping the battery, the device won't complete its self-test and displays a fault — how do I clear it?

If the power-on self-test was interrupted during the first boot — even briefly — the CJB-191 latches a BMS fault in memory. Power the device off completely, leave it off for 30 seconds, then restart and allow the full self-test sequence to run without interruption. If the fault persists, charge the battery to 100%, restart the device, and let it cycle through the entire startup verification before touching any controls.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.