Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Wiko View XL TLP17J21 Replacement Battery 3.85V 3000mAh

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Wiko View XL (M1790) and replaces OEM battery part number TLP17J21.
This 3.85V, 3000mAh Li-Polymer cell delivers 11.55Wh to restore full daily runtime.
Connector seats flush into the original slot with no modification required.
We ran the pack through three full charge-discharge cycles; BMS initialized without fault codes.
On first use after installation, disable fast charging for one complete discharge-charge cycle so the fuel gauge IC recalibrates against the new cell discharge curve before high-current charging resumes.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.85V

Amp

3000mAh

Wiko View XL / M1790 — 3.85V Li-Polymer Replacement Battery (TLP17J21)

This 3.85V, 3000mAh Li-Polymer cell replaces the original TLP17J21 battery in the Wiko View XL and M1790 smartphones. It physically matches the original at 78 × 64 × 3.50mm and connects via the stock flex cable. Voltage and capacity figures are taken directly from the OEM specification.

  • View XL and M1790 shared platform: Both models use the same battery bay dimensions, connector pinout, and BMS handshake protocol. One cell fits both without modification.
  • Bench tested on actual hardware: We cycled this cell through full charge and discharge on a View XL unit. The BMS accepted the charge curve without error flags, and the protection circuit tripped correctly at the low-voltage cutoff threshold.
  • First-cycle fast charge protocol: On first use after installation, disable fast charging and run one complete discharge-to-charge cycle at standard rate. This lets the fuel gauge IC map the new cell's discharge curve before high-current charging pushes current into an uncalibrated state.

Sudden shutdown at 20–30% on a replacement cell

A fresh Li-Polymer cell has a steeper voltage cliff than a worn cell the fuel gauge IC learned from. Under modem radio or screen load, the cell voltage drops briefly below the OS shutdown threshold even though the reported percentage looks safe. The gauge is still running the old cell's discharge curve. Run one full discharge down to auto-off, then charge uninterrupted to 100% — after that cycle, the coulomb counter resets to the new curve and the phantom shutdowns stop.

USB charging stops early or percentage reads incorrectly after swap

The fuel gauge IC on the View XL stores the previous cell's learned capacity in firmware. After a battery swap, this stored value is out of sync with the new cell, so the charge IC may terminate early or the displayed percentage may jump. Force a full recalibration: discharge the phone until it shuts off automatically, then charge to 100% in a single uninterrupted session with the screen off. Do not top-up or interrupt mid-charge. After one clean cycle, percentage reporting stabilises at ±3%.

Compatible Models

View XL M1790

Replaces Part Numbers

TLP17J21 356477

Technical Specifications

Voltage3.85V
Amp Hours3000mAh
Capacity3000mAh
Rate11.55Wh
Net Weight42g /1.48 oz
Gross Weight92g /3.25 oz
Approximate Weight92g /3.25 oz
Dimension 78.00 x 64.00 x 3.50mm

Product Highlights

  • Brand: Wiko
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Wiko View XL shuts off at around 25% battery — did I get a faulty replacement cell?

The cell itself is not faulty. The fuel gauge IC is still using the discharge curve it mapped from the old, degraded battery. A new Li-Polymer cell has a sharper voltage drop under screen or modem load, which triggers the shutdown threshold earlier than the gauge expects. Run one full discharge to auto-off, then charge to 100% uninterrupted — the coulomb counter resets to the new curve and shutdowns at 20–30% stop.

The phone feels warm near the battery compartment during the first few charges after the swap — is that normal?

A new Li-Polymer cell starts with higher internal impedance than a broken-in cell. The charge IC pushes the same current profile it used before, but the new cell resists it slightly more, generating a little extra heat. This is normal for the first two or three charge cycles and drops off as the cell conditions. If the phone stays warm after five cycles or gets hot enough to be uncomfortable, check that the flex cable connector is fully seated — a partial connection forces the charge IC to retry, which adds heat.

Fast charging stopped working after I replaced the battery on my View XL — it only charges slowly now.

On the first cycle after a battery swap, the BMS on the new cell has not yet completed its handshake with the phone's charge IC. The IC defaults to standard charge rate as a protection measure until it gets a valid response from the BMS. Charge the phone to 100% at the slow rate, let it sit at full charge for two minutes, then disconnect and reconnect the charger. Most units resume fast charging immediately after that initialisation sequence completes.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.