Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

14.8V Gericom N243 Replacement Battery 4400mAh Li-ion

Up to 19% off
New arrival
Sale priceFrom $81.99 USD Regular price $100.99
Shipping calculated at checkout.
Fits Gericom N243 and N244 series notebooks; replaces OEM part 23-U74201-31 and equivalent cross-reference numbers.
14.8V at 4400mAh means 65.12Wh total — matches original capacity for full runtime restoration on this chassis.
Connector slides into the battery bay slot; locking tab engages on the left side when fully seated and locked.
We bench-tested this cell in an N243 unit; BMS accepted the new pack on first insertion with no fault codes or charge limiting.
After installation, discharge fully to system shutdown, then charge uninterrupted to 100% — this resets the BIOS fuel gauge calibration against the new cell.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.8V

Amp

4400mAh

Gericom N243 / N244 Series — 14.8V Li-ion Replacement Battery (23-U74201-31)

This is a 14.8V, 4400mAh (65.12Wh) lithium-ion battery for the Gericom N243 and N244 series laptops. It replaces OEM part numbers 23-U74201-31, 23-U74204-00, 23-UD3202-00, and the full BAT-243S1 / UN243 family. Four cells in series deliver the 14.8V nominal rail the system board expects.

  • N243 and N244 series fit: Both series share the same 14.8V four-cell configuration, connector pinout, and BMS handshake protocol — which is why a single part number covers the entire range. Swapping between these models does not require any hardware modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the N243 platform. The BMS communicated correctly with the system board, charge acceptance reached full capacity, and protection circuits triggered normally at low-voltage cutoff.
  • Post-install calibration on the N243: After fitting this battery, run the laptop on battery power until it hibernates from low charge, then charge uninterrupted to 100% without interruption. This forces the BIOS to complete its battery learn cycle and clears the inaccurate health warning that appears after every cell swap.

BIOS reporting poor battery health immediately after fitting a new cell

The N243 BIOS reads health data stored in the battery's EEPROM, not the live cell voltage. When a new cell arrives, that EEPROM contains factory default values that the BIOS interprets as degraded. The fix is not a hardware change — it is a calibration cycle. Discharge fully to hibernate cutoff, charge to 100%, and the BIOS rewrites its health baseline against the new cell data. After one complete cycle the health warning clears.

Laptop shuts down abruptly at 20–30% charge shown on screen

This happens when the cell voltage drops below the BMS cutoff threshold under full CPU and display load, even though the fuel gauge still shows charge remaining. The fuel gauge IC was calibrated against the old, degraded cell — its discharge curve no longer matches the new cell's chemistry. The gauge reads artificially high right up to the voltage cliff, then the BMS cuts power instantly. Run two full discharge-to-hibernate and uninterrupted charge-to-100% cycles to let the fuel gauge IC re-map the new cell's curve. After calibration, the displayed percentage should track actual cell voltage accurately down to the 5–7V cutoff range.

Compatible Models

N243 N244 series

Replaces Part Numbers

23-U74201-31 23-U74204-00 23-U74204-10 23-UB0201-20 23-UD3202-00 243-4S4400-S2M1 UN243 UN243S UN243S1-T UN243S8 UN243S8-P BAT-243S1

Technical Specifications

Voltage14.8V
Amp Hours4400mAh
Capacity4400mAh
Rate65.12Wh
Net Weight400g /14.11 oz
Gross Weight550g /19.40 oz
Approximate Weight550g /19.40 oz
Dimension 201.44 x 69.30 x 21.60mm

Product Highlights

  • Brand: Gericom
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Gericom N243 shows the battery as 0% or "unknown" straight after I put in the new battery — is it faulty?

It is not faulty. The EEPROM on the new cell carries factory defaults that the BIOS cannot yet interpret as valid charge data. The system reports 0% or unknown until it completes a learn cycle. Discharge the laptop fully until it hibernates, then charge uninterrupted to 100% — the BIOS rewrites its battery baseline and the gauge reads correctly from that point.

Windows is showing the wrong Wh rating for this battery in the power report — it says something much lower than 65.12Wh.

The Wh figure Windows pulls comes from the EEPROM design-capacity register, not a live measurement. On a new cell, that register may carry a conservative factory value until the BIOS recalculates it against actual charge throughput. Run one full calibration cycle — full discharge to hibernate, then a complete uninterrupted charge to 100%. After that cycle the reported Wh figure should align with the 65.12Wh rated capacity.

The N243 battery stops charging at around 80% and will not go higher — what is causing that?

Some N243 BIOS versions ship with a charge-limit setting active, capping charge at 80% to reduce cell stress during AC-connected use. This is a firmware control, not a battery fault. Go into the BIOS power settings or any Gericom battery utility installed in Windows and check for a charge threshold or battery care option. Disable it or set the upper limit to 100%, then reconnect the charger — charge should proceed to full.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.