HP G60-200 Notebook Replacement Battery 10.8V 4400mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
HP G60-200 Notebook Replacement Battery 10.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
HP G60-200 Notebook Replacement Battery 10.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
4400mAh
HP G60-200 / G61 / G71 Series — 10.8V Li-ion Replacement Battery (HSTNN-CB72)
This is a 10.8V, 4400mAh (47.52Wh) Li-ion battery for the HP G60-200, G61, G71, and HDX X16-1100 notebook series. It replaces a wide range of OEM part numbers including HSTNN-CB72, HSTNN-DB72, HSTNN-IB72, and HSTNN-XB72. The battery slots into the underside bay using the same latch and connector as the original HP unit.
- G60 / G61 / G71 platform fit: These models share the same 10.8V power rail, six-pin connector, and BMS handshake protocol. HP used the same battery bay across this notebook generation, so one cell covers all three chassis without adapter or modification.
- Bench tested on actual hardware: We ran this cell on a G61 unit and monitored BMS communication across the full charge cycle. The protection circuit engaged correctly at both high-cell and low-cell thresholds, and the BIOS accepted the battery without throwing an unknown device flag on the first cycle.
- Post-install discharge cycle on HP notebooks: After fitting this battery, run the laptop on battery power until it hibernates at low charge cutoff, then charge uninterrupted to 100%. This triggers the BIOS battery learn cycle and resets the health gauge — skipping it leaves the system reporting inaccurate capacity warnings that persist across reboots.
Why the G60 BIOS reports poor battery health immediately after a cell swap
The HP G60-series BIOS reads health data from the battery's EEPROM, which stores cycle count and rated capacity from the previous cell. A new battery arrives with factory EEPROM values that don't match the wear profile the BIOS expects to see. The firmware interprets this mismatch as a degraded or incompatible cell rather than a new one. Running one full discharge-to-hibernate followed by a complete uninterrupted charge cycle writes fresh calibration data and clears the false health warning.
Laptop shuts down at 20–30% charge shown on the G71
This happens when the fuel gauge IC hasn't yet calibrated against the new cell's actual discharge curve. The G71's power management cuts the system before the gauge hits zero because it's working from stale voltage-to-capacity mapping inherited from the old battery. Under combined CPU and display load, the voltage drop is steeper than the uncalibrated gauge predicts, so the cutoff fires early. Run two or three full discharge-and-charge cycles — by the third cycle the fuel gauge IC recalibrates and the shutdowns stop.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: HP
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My HP G60 is showing the battery as "0% available (plugged in, charging)" but it never actually charges — what's happening?
This usually means the BIOS has lost communication with the battery's EEPROM on the first handshake after install. Power the laptop off completely, remove the battery, hold the power button for 15 seconds to drain residual charge from the board, then reseat the battery and boot. If the BIOS still shows 0%, connect AC power, leave it for 20 minutes without booting, then power on — this gives the charge controller time to initialise the new cell before the OS loads.
The fuel gauge on my G61 jumps from 60% straight to 15% with no warning — is the battery faulty?
The fuel gauge IC on this platform maps voltage to percentage using data collected from the previous cell. A new cell has a different discharge curve, so the IC loses accuracy at the steeper part of the voltage drop — typically mid-cycle — and the gauge corrects itself with a sudden jump. This is not a cell fault. Run three complete discharge-to-hibernate and full-charge cycles back to back, and the IC will recalibrate its curve against the new chemistry. The jumps stop after calibration settles.
Windows is reporting the Wh rating as 40Wh on my HP G71, but the battery should be 47.52Wh — why is the number wrong?
Windows pulls the Wh figure from the battery's EEPROM, which stores the manufacturer's rated design capacity. If the EEPROM value was written conservatively at the cell factory, or the BIOS hasn't completed a learn cycle yet, the OS displays the stored figure rather than the measured one. Run one full discharge-to-hibernate followed by a complete charge to 100% — after the learn cycle completes, check the reported design capacity again in PowerCfg (/batteryreport) and it should align with the 47.52Wh spec.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
