Lenovo ThinkPad P16s Replacement Battery L21D4P72 15.4V
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Lenovo ThinkPad P16s Replacement Battery L21D4P72 15.4V - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Lenovo ThinkPad P16s Replacement Battery L21D4P72 15.4V - is backordered and will ship as soon as it is back in stock.
Voltage
15.4V
Amp
3300mAh
Lenovo ThinkPad P16s Gen 2 (Intel) — 15.4V Li-Polymer Replacement Battery (L21D4P72)
This is a 15.4V, 3300mAh (50.82Wh) lithium-polymer cell for the Lenovo ThinkPad P16s and P16 Gen 1 and Gen 2 series mobile workstations. It replaces OEM part numbers L21D4P72, L21L4P72, 5B10W51868, 5B10W51870, SB10W51969, and SB10W51971. The cell fits the standard battery bay on both Intel and AMD variants of the P16s Gen 1 and Gen 2 platforms.
- Cross-platform P16s and P16 Gen 1/Gen 2 fit: Lenovo shared this battery form factor, connector pinout, and BMS handshake protocol across both the Intel and AMD P16s Gen 1 and Gen 2 lineups. The voltage rail and physical dimensions — 316.30 × 111.70 × 5.60mm — are identical across these variants, so one cell covers the full model range.
- Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on a P16s Gen 2 Intel unit. The BMS completed authentication with the EC firmware, reported correct Wh capacity to the OS, and held voltage stable under sustained CPU and display load without triggering low-voltage cutoff prematurely.
- Post-installation learn cycle on the P16s: After fitting this cell, run one full discharge until the laptop hibernates at its low-battery cutoff, then charge uninterrupted to 100% without interruption. This resets the BIOS battery learn cycle and clears the inaccurate health warning the ThinkPad BIOS routinely displays after any cell swap.
BIOS reporting poor battery health immediately after fitting a new P16s cell
The ThinkPad BIOS reads battery health from EEPROM data stored in the old cell's fuel gauge IC. When a new cell is installed, that EEPROM record is gone, and the BIOS flags the battery as degraded because it has no calibration baseline yet. This is not a fault with the replacement cell. Running one complete discharge-to-hibernate followed by a full uninterrupted charge gives the fuel gauge IC enough data to write a new baseline. After one or two cycles, the BIOS health indicator resets to normal.
ThinkPad P16s shutting down at 20–30% charge shown on the fuel gauge
This happens when the cell voltage drops below the EC's cutoff threshold under full CPU plus display load before the reported percentage reaches zero — a voltage cliff caused by a degraded cell that cannot sustain current delivery at high draw. A new cell resolves the shutdown, but the fuel gauge IC still needs calibration against the fresh chemistry to track the percentage accurately. Perform the full discharge-to-hibernate cycle once after installation. On the P16s, target a resting voltage of 16.8V at full charge to confirm the cell is within spec.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Lenovo
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Why does my ThinkPad P16s show the wrong Wh rating in Lenovo Vantage after I swapped the battery?
The Wh figure displayed in Lenovo Vantage and in the BIOS battery screen is pulled from EEPROM data written by the original cell's fuel gauge IC. A replacement cell ships with its own EEPROM values, which may differ slightly from the OEM-rated figure until the fuel gauge completes calibration against the actual chemistry. This is a data mismatch, not a capacity defect. Run one full discharge-to-hibernate cycle followed by a full charge, and the reported Wh figure will settle to the correct value.
The OS fuel gauge is jumping erratically — showing 60%, then 45%, then 70% within minutes on my P16s Gen 2. What is happening?
The fuel gauge IC in the ThinkPad P16s needs two to three calibration cycles against the new cell before it can track state-of-charge accurately. Until then, the percentage readout can swing wildly because the IC is still mapping voltage curves from the old cell's history. No hardware fault is causing this. Run two complete discharge-to-hibernate and full-recharge cycles back to back, and the gauge will stabilise.
My replacement P16s battery stops charging at 80% and will not go higher — is the cell faulty?
This is almost always the Lenovo BIOS charge threshold, not a cell fault. ThinkPad firmware includes a Conservation Mode setting that caps charging at 80% to reduce long-term cell stress during AC-connected use. Open Lenovo Vantage, go to Power → Charge Threshold, and switch from Conservation Mode to Full Charge. The cell will then charge to 100%. If Vantage is not installed, the same setting is accessible in the BIOS under Config → Power.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




