Heim & Haus 18796 Smart Home Replacement Battery 10.8V 2600mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Heim & Haus 18796 Smart Home Replacement Battery 10.8V 2600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Heim & Haus 18796 Smart Home Replacement Battery 10.8V 2600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
2600mAh
Heim & Haus 18796 Rolladenantrieb — 10.8V Li-ion Replacement Battery (HH18796-MOLEX)
This is a 10.8V, 2600mAh Li-ion replacement battery for the Heim & Haus 18796 Rolladenantrieb smart home device. It slots in using the MOLEX connector and restores power to units where the original cell has degraded or failed completely. Voltage and capacity match the OEM specification.
- 18796 and Rolladenantrieb compatibility: Both models run on the same 10.8V rail and share the HH18796-MOLEX connector pinout. The BMS on each accepts the same charge profile, so no firmware or hardware changes are needed when swapping cells between units of this type.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on the 18796 platform. The BMS handshake completed correctly, charge acceptance was normal, and the protection circuit tripped at the expected low-voltage threshold without corrupting the device pairing state.
- Post-swap reconnection window: After installing this battery, wait a full 60 seconds before expecting the Rolladenantrieb to respond via your smart home app. These devices run a mesh network re-join sequence after any power interruption, and cutting that window short causes a false "offline" status in the hub.
Why the 18796 drains faster after a battery swap than the old cell did
A new cell at full charge can actually increase polling frequency on some smart home platforms — the controller detects higher available voltage and processes network requests it was previously deferring. If your hub is set to a high polling interval or the device sits on a busy mesh node, current draw goes up noticeably. Check your hub's device settings and lower the polling interval if the drain rate seems excessive. A typical idle draw for this class of device should not exceed a few milliamps at 10.8V.
Low battery alert appearing immediately after fitting a new cell
This happens when the battery has sat in storage long enough for its resting voltage to drop below the alert threshold the hub monitors. The cell is not faulty — it just needs one full charge cycle before the hub reads an accurate state. Plug the device into its charging source and let it reach full voltage before reinstalling or dismissing the alert. Once the cell sits above 12.0V resting, the alert clears and the hub reports normal battery status.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Heim & Haus
- Manufacturer: CS
- Color: Blue
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Heim & Haus 18796 went offline right after I put the new battery in — is the battery dead?
The battery is almost certainly fine. The 18796 runs a mesh network re-join sequence every time power is interrupted, and that process takes up to 60 seconds to complete. Wait a full minute after installing the cell before checking the app. If the device is still offline after 60 seconds, trigger a manual re-join from the hub interface.
The Rolladenantrieb isn't showing up in my hub at all after the battery swap — even after waiting
This is a lost pairing, not a battery fault. The hub dropped the device entry when power was cut, and the re-join sequence alone won't recover it. Open your smart home app, navigate to device management, and run the add/pair sequence for the 18796 again. The device will re-register and appear as normal once pairing completes.
The new battery seems to be draining noticeably faster than the original cell did — what's causing that?
A fresh cell at full voltage can prompt the hub to increase polling frequency, pulling more current than the depleted original was drawing. Check the polling or reporting interval setting for the 18796 in your hub's device configuration and reduce it if it's set to a short interval. If drain continues at the same rate after adjusting that setting, check whether the device is placed on a high-traffic mesh node and move it closer to the hub to reduce retransmission overhead.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






