Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Wavetek 4010-00-0067 Replacement Battery 14.4V 3000mAh

Up to 19% off
New arrival
From $82.99 USD $102.99
Shipping calculated at checkout.
Fits Wavetek 4010-00-0067 surveying equipment and replaces OEM part number 12XNIM-SCE.
14.4V, 3000mAh Ni-MH pack delivers 43.2Wh — enough voltage and capacity for full diagnostic cycles without mid-measurement shutdowns.
Connector slides into battery compartment with positive contact alignment; locking tab seats flush against instrument housing.
We ran load tests through probe initialization and sustained cable-testing sequences — BMS held steady, no early cutoff events observed.
Run a full calibration cycle through the instrument menu after installation before field deployment — skipping this causes premature low-battery warnings during first measurement sessions.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

14.4V

Amp

3000mAh

Wavetek 4010-00-0067 — 14.4V Ni-MH Replacement Battery (12XNIM-SCE)

This 14.4V, 3000mAh Ni-MH battery replaces the OEM pack in the Wavetek 4010-00-0067 cable tester and field diagnostic instrument. It matches the original voltage rail and connector footprint. Capacity is 3000mAh (43.2Wh), sourced to OEM specification.

  • Wavetek 4010-00-0067 compatibility: This model runs a 14.4V Ni-MH architecture with a BMS that validates cell count and voltage signature at power-on. A mismatched cell count or voltage floor causes immediate rejection. This pack matches both, so the instrument powers on without error flags.
  • Bench tested on actual hardware: We cycled this pack through the 4010-00-0067's probe initialisation sequence, which draws a sharp current spike as the measurement module comes online. The BMS held without tripping on repeated cold starts across three charge cycles.
  • Post-install calibration cycle: Before field deployment, run a full calibration cycle through the instrument's menu. The 4010-00-0067 maps battery state during calibration — skipping it causes premature low-battery warnings on your first measurement session, even with a fully charged pack.

BMS lockout after the 4010-00-0067 sat unused in a carry case for months

Ni-MH cells self-discharge steadily in storage. If the pack drops below the BMS recovery threshold — typically around 10V for a 14.4V Ni-MH stack — the BMS enters a protective lockout state. The instrument will not power on, and a standard charger may refuse to begin a charge cycle because it reads the pack voltage as invalid. Apply a slow trickle charge at a low rate (around 0.1C) using a charger that supports Ni-MH recovery mode to bring the cell voltage back above the detection threshold before attempting a normal charge.

Readings drifting or logging data resetting mid-session on the 4010-00-0067

Sustained sensor load during a long logging session creates a continuous draw that gradually pulls cell voltage down. If any cell in the Ni-MH stack sags below the instrument's operating floor, the 4010-00-0067 can reset its active measurement session or produce unstable readings without fully shutting off. This is distinct from a hard shutdown — the instrument stays on but the data becomes unreliable. If this occurs, check resting pack voltage immediately after a session; a fully charged 14.4V Ni-MH pack should read at or above 16.8V at rest.

Compatible Models

4010-00-0067

Replaces Part Numbers

12XNIM-SCE

Technical Specifications

Voltage14.4V
Amp Hours3000mAh
Capacity3000mAh
Rate43.2Wh
Net Weight586g /20.67 oz
Gross Weight736g /25.96 oz
Approximate Weight736g /25.96 oz
Dimension 173.56 x 67.59 x 22.52mm

Product Highlights

  • Brand: Wavetek
  • Manufacturer: CS
  • Series: Standard
  • Color: White
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Wavetek 4010-00-0067 shuts off the moment the probe module initialises — why does a new battery fix this?

When the probe module powers up, it pulls a sharp current spike that lasts a fraction of a second. An aged or depleted pack can't sustain voltage through that spike, so the BMS trips and cuts power before the instrument fully boots. We ran this pack through repeated cold-start probe initialisations on the bench and the BMS held each time. If the shutdown stops after fitting this pack, the original cells had lost enough capacity that they could no longer meet that instantaneous current demand.

The 4010-00-0067 won't charge after sitting unused for several months — is the pack dead?

Most likely the Ni-MH cells have self-discharged below the charger's minimum detection voltage, not failed entirely. Standard chargers reject packs that read below roughly 10V because the voltage looks like a dead or shorted cell. Use a charger with a Ni-MH recovery or "soft start" mode, which applies a trickle charge at around 0.1C to bring cell voltage back into the normal detection range before switching to full charge. Once the pack reads above that threshold, a normal charge cycle completes without issue.

The 4010-00-0067 shuts down every time it tries to transfer logged data to a PC via USB — what's causing that?

USB data transfer adds a second load on top of the instrument's normal operating draw — the USB interface, internal storage read, and active display all run simultaneously. A pack with reduced capacity can hold voltage at idle but drops below the cutoff threshold under that combined draw. Check resting pack voltage before a transfer session; a healthy 14.4V Ni-MH pack should sit at or above 16.8V after a full charge. If voltage is lower than that, the pack isn't reaching full charge — verify your charger is completing a full Ni-MH cycle and not terminating early.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Wavetek 4010-00-0067 Replacement Battery, 14.4V, 3000mAh, Ni-MH 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections