KURIO 7S Tablet Compatible Battery 3.7V 4000mAh Li-Polymer PL458097
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
KURIO 7S Tablet Compatible Battery 3.7V 4000mAh Li-Polymer PL458097 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
KURIO 7S Tablet Compatible Battery 3.7V 4000mAh Li-Polymer PL458097 - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
4000mAh
KURIO 7S / C1300 — 3.7V Li-Polymer Replacement Battery (PL458097)
This is a 3.7V, 4000mAh Li-Polymer battery for the KURIO 7S and C1300 kids' tablets. It replaces part number PL458097 when the original cell no longer holds a usable charge. Dimensions are 99.15 × 79.55 × 4.20 mm — measure your existing cell before ordering to confirm fitment.
- 7S and C1300 compatibility: Both tablets share the same mainboard revision and battery bay dimensions, so a single cell covers both. The connector pinout and BMS handshake are identical across the two models.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on a KURIO mainboard. The BMS accepted the new cell without fault codes, and the charge IC reached full termination voltage cleanly.
- Fuel gauge reset after swap: After fitting this battery, run the tablet down to automatic shutoff once, then charge uninterrupted to 100%. This recalibrates the fuel gauge IC against the new cell's actual capacity curve and clears the inaccurate percentage readings that typically appear straight after a swap.
Tablet shutting down at 15–25% after battery replacement
This is a fuel gauge calibration problem, not a faulty cell. The fuel gauge IC was trained on the old cell's discharge curve. When voltage drops under combined display and WiFi load, it hits what looks like an empty-battery floor while real capacity still exists. Run one complete discharge to automatic shutoff, then a full uninterrupted charge to 100%. After that cycle, the IC remaps its low-voltage threshold to the new cell and the phantom shutdowns stop.
KURIO tablet showing wrong battery percentage after swap
The percentage is calculated by a fuel gauge IC on the board, not the battery itself. That IC stored the old cell's capacity data and is now reading the new cell's voltage incorrectly. A single full discharge-to-shutoff followed by a full charge to 100% forces the IC to relearn the new cell's voltage-to-capacity relationship. After that cycle, percentage readings stabilise and track normally.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: KURIO
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The KURIO keeps switching off around 20% — is the replacement battery faulty?
The battery is not faulty. The fuel gauge IC on the tablet's board was calibrated to the old cell, so it misreads the voltage cliff on the new one and triggers a shutdown early. Run the tablet down to automatic shutoff once, then charge it uninterrupted to 100%. That single cycle recalibrates the IC and the early shutdowns stop.
Fast charging stopped working after fitting the new PL458097 — the tablet now charges slowly every time.
The charge controller needs one completed charge cycle before it confirms the new cell's internal resistance and re-enables higher charge current. Plug in with the original cable, let it run from near-empty to 100% without unplugging, and fast charge should resume on the next session. If it does not, check the cable — a USB 2.0 data cable limits current to 500mA regardless of the charger.
Battery percentage drops quickly from 100% then slows down — is the 4000mAh capacity wrong?
The capacity is correct. What you are seeing is fuel gauge drift — the IC maps percentage non-linearly because it was trained on a different cell. The top end of the curve looks steep, the middle flattens out. One full discharge to automatic shutoff followed by a complete charge to 100% re-anchors the IC's curve to this cell. After that cycle the percentage steps down at a consistent rate.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





