Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Motorola Xoom Family Edition BATBJA0L21 Replacement Battery 3.7V 6700mAh

Up to 20% off
New arrival
Sale priceFrom $48.99 USD Regular price $60.99
Shipping calculated at checkout.
Fits Motorola Xoom Family Edition tablet, MZ505 model, replacing OEM part BATBJA0L21.
3.7V, 6700mAh lithium-polymer cell powers the 10.1-inch display and processor during multimedia and computing use.
Connector seats into the internal battery slot with a single locking tab; orientation marked on the housing.
We charged the cell through the tablet's USB port and confirmed the BMS accepted the new pack without fault codes.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell and resolves the inaccurate percentage display that appears after a swap.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

6700mAh

Motorola Xoom Family Edition MZ505 — 3.7V Li-Polymer Replacement Battery (BATBJA0L21)

This 3.7V 6700mAh lithium-polymer battery replaces the original BATBJA0L21 cell in the Motorola Xoom Family Edition tablet. It fits the MZ505 and Xoom 10.1 variants. The battery powers the display, processor, wireless radios, and all active applications on these 10-inch Android tablets.

  • MZ505 and Xoom 10.1 compatibility: All three listed models share the same charge IC, connector pinout, and BMS handshake protocol. The BATBJA0L21 part number covers the full Xoom Family Edition lineup — no hardware differences affect fitment across these variants.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on an MZ505 unit. The BMS accepted the new cell without fault codes, completed a full charge curve normally, and the charge IC held steady at the expected termination voltage.
  • Fuel gauge reset after installation: After fitting the new battery, run the tablet down to automatic shutoff from a full charge, then charge it uninterrupted to 100%. This forces the fuel gauge IC to recalibrate against the new cell's actual capacity curve and corrects the inaccurate percentage readings that appear right after a swap.

Tablet shutting down at 15–25% remaining after battery replacement

This happens when the fuel gauge IC is still calibrated to the old, degraded cell. The reported percentage no longer maps correctly to actual cell voltage. Under combined display and WiFi load, voltage drops sharply at a point the IC doesn't recognise as low — triggering an emergency shutdown before the reading hits zero. One full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% resets the calibration and eliminates the premature cutoff.

Percentage dropping faster than expected from 100% on the Xoom MZ505

A new cell has a different internal resistance profile than the worn cell the fuel gauge was trained on. The IC misreads the voltage slope and reports capacity draining faster than it actually is. This is gauge drift, not a defective battery. Run one complete cycle — full discharge to automatic shutoff, then a full uninterrupted charge — and the gauge recalibrates to the 6700mAh capacity of the replacement cell.

Compatible Models

Xoom Family Edition MZ505 Xoom 10.1

Replaces Part Numbers

BATBJA0L21

Technical Specifications

Voltage3.7V
Amp Hours6700mAh
Capacity6700mAh
Rate24.79Wh
Net Weight139g /4.90 oz
Gross Weight279g /9.84 oz
Approximate Weight279g /9.84 oz
Dimension 157.33 x 110.28 x 5.82mm

Product Highlights

  • Brand: Motorola
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

Why does my Xoom Family Edition show the wrong battery percentage after I put in a new battery?

The fuel gauge IC on the MZ505 learns the capacity curve of the cell it's paired with over time. When you install a new cell, the IC is still calibrated to the old, degraded one and misreports the actual state of charge. Run the tablet from a full charge down to automatic shutoff, then charge it uninterrupted to 100% — one complete cycle recalibrates the gauge to the replacement cell's actual 6700mAh capacity.

My Xoom tablet feels warm while charging with the new battery — is something wrong?

Warmth during charge is normal when the charge IC runs its first full cycle on a new cell. The IC actively manages current across the full charge curve, and that generates some heat — particularly in the upper voltage range above 4.1V. If the tablet is hot to the touch or charging stops unexpectedly, check that the charging port and cable are clean and undamaged, then retry with a known-good 5V adapter.

Fast charging stopped working on my Xoom MZ505 after the battery swap — what happened?

Some charge protocols require at least one completed charge cycle before the device renegotiates charging behaviour with the adapter. Plug in, let the tablet charge fully without interruption, then disconnect and reconnect the charger. If fast charging still doesn't engage, confirm the adapter output matches the original spec — the Xoom MZ505 charge IC will fall back to standard current if it doesn't recognise the adapter.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.