Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

RCA Voyager II 7" Compatible Battery 3.7V 1500mAh PT425080

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits RCA Voyager II 7" tablet, replaces OEM part number PT425080.
3.7V, 1500mAh lithium-polymer cell restores full charge cycles to this Android tablet.
Connector sits flush against the internal charge port with single retention clip.
We ran a full discharge cycle on the bench; BMS delivered steady voltage curve with no early cutoff.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration and resolves inaccurate percentage display.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1500mAh

RCA Voyager II 7" — 3.7V Li-Polymer Replacement Battery (PT425080)

This 3.7V, 1500mAh Li-Polymer battery replaces part number PT425080 in the RCA Voyager II 7" tablet. It fits the T6873w42 and RCT6773W22 alongside other Voyager II variants. Swap it in when the original cell no longer holds a charge through normal browsing or streaming sessions.

  • Voyager II variant coverage: The T6873w42, RCT6773W22, and related Voyager II boards share the same 3.7V single-cell architecture and PT425080 connector layout, so one cell fits across the lineup without any wiring modification.
  • Bench tested on actual hardware: We cycled this cell through the Voyager II charge IC and confirmed the BMS accepted the full charge handshake without fault flags. Voltage at full charge measured at the expected 4.2V terminal voltage.
  • Fuel gauge recalibration after swap: After installation, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. This resets the fuel gauge IC against the new cell's capacity curve and clears the inaccurate percentage readings that commonly appear on the first boot after a battery swap.

Voyager II shutting down at 15–25% remaining after battery replacement

The Voyager II's charge IC maps voltage curves from the previous cell, not the new one. When display backlight and Wi-Fi run simultaneously, combined load draws enough current to cause a sharp voltage dip that the old calibration reads as critically low. The tablet's protection circuit triggers a shutdown well above true empty. Run one full discharge-to-shutoff cycle, then a full uninterrupted charge — after that cycle, the fuel gauge re-maps to the PT425080 cell's actual voltage curve and the early shutdowns stop.

Battery percentage dropping faster than expected from 100%

Fast percentage drops from a full charge are a fuel gauge drift symptom, not a cell defect. The Android fuel gauge IC on the Voyager II holds calibration data from the old battery and misreads the new cell's discharge curve — it jumps percentage points early in the discharge cycle. One complete cycle from 100% charge down to automatic shutoff, followed by an uninterrupted full charge, resyncs the IC to the PT425080's actual 1500mAh capacity. After that single cycle, percentage reporting stabilises across the discharge range.

Compatible Models

Voyager II 7" T6873w42 RCT6773W22 Voyager II RCT6773W22B

Replaces Part Numbers

PT425080

Technical Specifications

Voltage3.7V
Amp Hours1500mAh
Capacity1500mAh
Rate5.55Wh
Net Weight35g /1.23 oz
Gross Weight85g /3.00 oz
Approximate Weight85g /3.00 oz
Dimension 86.00 x 50.00 x 3.60mm

Product Highlights

  • Brand: RCA
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My RCA Voyager II tablet shows 40% battery but shuts off immediately — is the new battery faulty?

The battery is not faulty. The Voyager II's fuel gauge IC is still calibrated to the old cell's voltage curve, so it misreads the PT425080's charge state and triggers a premature shutdown. Run the tablet down to automatic shutoff, then charge it uninterrupted to 100% without unplugging early. That single full cycle resets the IC calibration and the shutdowns stop.

The Voyager II shows 100% charged right after I plugged in the new battery — that can't be right?

It is a fuel gauge artefact. The charge IC retained the last calibration point from the old cell and mapped the new cell's resting voltage to 100% without running a full charge cycle. Discharge the tablet completely to automatic shutoff, then charge uninterrupted to 100%. After that cycle, the IC samples the PT425080's actual capacity and the percentage display reads accurately from the start of each charge.

Fast charging stopped working on my Voyager II after I replaced the battery — why?

The Voyager II's charge controller needs at least one completed charge cycle before it confirms the new cell's internal resistance profile and resumes its standard charge rate. On the first charge after a swap, it defaults to a reduced rate as a precaution. Plug in and charge the tablet fully without interrupting the session. After that first uninterrupted charge completes, the controller accepts the PT425080 cell and resumes the normal charge rate.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.