Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Dreame P10 Pro 25.6V Cordless Vacuum Replacement Battery 2400mAh

Up to 19% off
New arrival
From $132.99 USD $163.99
Shipping calculated at checkout.
Fits Dreame P10 Pro and P10 stick vacuums, replaces OEM part numbers P2125-7SIP-SCA and P2013A-7SIP-SC-02.
25.6V, 2400mAh capacity delivers full motor power across both models without voltage sag under carpet load.
Connector slides straight into the battery slot with positive contact on the left side and locking tab engagement.
We bench tested this pack on a P10 Pro motor load — BMS responded correctly to sustained suction draw and registered full charge without cutoff.
Do not leave this battery on the charging dock continuously; cordless vacuum chargers apply trickle charge indefinitely and degrade capacity significantly faster than removed-after-full-charge cycles.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

25.6V

Amp

2400mAh

Dreame P10 / P10 Pro — 25.6V Li-ion Replacement Battery (P2125-7SIP-SCA)

This 25.6V, 2400mAh lithium-ion battery pack replaces the original power cell in the Dreame P10 and P10 Pro cordless stick vacuums. It fits the motor and BMS handshake requirements of both models and carries OEM part numbers P2125-7SIP-SCA and P2013A-7SIP-SC-02. Capacity is 61.44Wh, matching the factory specification.

  • P10 and P10 Pro compatibility: Both models run the same 25.6V seven-cell series architecture and share an identical connector and BMS communication protocol, which is why one pack covers both variants without modification.
  • Bench tested on actual hardware: We cycled this pack through full charge and discharge on the P10 Pro motor platform, confirmed the BMS handshake cleared correctly, and verified the cell voltage held within spec across sustained high-suction mode.
  • Dock charging behaviour on the P10 series: Do not leave the vacuum sitting on the charging dock continuously. The P10 dock does not terminate charge at 100% in a way that protects long-term cell health — charge to full, then remove the unit from the dock entirely between sessions.

Suction dropping before the battery indicator reaches low

The P10 Pro's BMS monitors cell voltage under load, not at rest. When the filter is partially blocked or the brush roll is restricted, motor current draw spikes and the BMS reads a voltage sag that it interprets as low charge. The motor throttles back to protect the cells, even if the indicator still shows two or three bars. Clean the filter and check for blockages first — if suction recovers immediately, the battery is not the fault.

Motor cuts out mid-clean then recovers after a short pause

This is an overcurrent trip, not a flat battery. The P10 series BMS cuts power when sustained draw exceeds its current threshold — typically triggered by a blocked filter forcing the motor to work harder. The pack resets itself after a brief cooldown, which is why the vacuum powers back on a minute or two later. Check and wash the HEPA filter, then confirm the post-motor filter is clear before ruling out a cell fault.

Compatible Models

P10 Pro P10

Replaces Part Numbers

P2125-7SIP-SCA P2013A-7SIP-SC-02

Technical Specifications

Voltage25.6V
Amp Hours2400mAh
Capacity2400mAh
Rate61.44Wh
Net Weight492g /17.35 oz
Gross Weight672g /23.70 oz
Approximate Weight672g /23.70 oz
Dimension 172.00 x 82.30 x 42.00mm

Product Highlights

  • Brand: Dreame
  • Manufacturer: CS
  • Series: Standard
  • Color: White
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Dreame P10 Pro loses suction noticeably before the battery light shows low — is the new battery going to fix this?

Probably not on its own. Suction drop before the low-battery indicator is almost always a voltage sag caused by restricted airflow, not low capacity — the BMS throttles the motor when it sees cell voltage dip under high current draw. Clean the HEPA and post-motor filters first. If suction returns to full strength immediately after cleaning, the battery was never the cause; if suction stays weak on a clean filter with a new pack, check for a blockage in the brush head or duct.

My P10 Pro battery capacity seems to have fallen off much faster than expected — I use it daily on the dock.

Continuous dock charging is the most common cause of early capacity fade on the P10 series. The dock does not fully terminate charge at 100%, so cells sitting connected are subject to prolonged trickle current that degrades them over months. Charge the new battery only when the pack is depleted, then remove it from the dock once full. With this cycle, capacity should stay near rated spec significantly longer than continuous-dock use allows.

The replacement battery won't charge at all on my Dreame P10 — the charger light just stays red or doesn't respond.

First, check that the battery is fully seated — the P10 connector is a firm press-fit and a partial connection will prevent the charger from detecting the pack. If the connection is solid and the charger still won't respond, the BMS may need a reset: remove the battery, wait 60 seconds, reinsert, and connect the charger again. If the charger LED still does not shift to charging mode, test the charger port with a multimeter and confirm output voltage is at or above 29V before assuming the replacement cell is at fault.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Dreame P10 Pro Replacement Battery, 25.6V, 2400mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections