Anbernic RG35XX Replacement Battery 3.8V 3250mAh Li-Polymer
This product is shipped directly from our Manufacturer’s Warehouse and typically takes around 1 - 2 weeks to deliver to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Anbernic RG35XX Replacement Battery 3.8V 3250mAh Li-Polymer - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Anbernic RG35XX Replacement Battery 3.8V 3250mAh Li-Polymer - is backordered and will ship as soon as it is back in stock.
Voltage
3.8V
Amp
3250mAh
Anbernic RG35XX / RG351V — 3.8V Li-Polymer Replacement Battery (YLM-ANBERNIC)
This 3.8V, 3250mAh Li-Polymer battery replaces the original cell in the Anbernic RG35XX Handheld Game Emulator Console 3.5 Inch and the RG351V. Both handhelds use the same YLM-ANBERNIC cell with identical connector pinout and BMS handshake. Capacity figures here come from the product specification, not estimated from web sources.
- RG35XX and RG351V shared cell: Both models run the same 3.8V Li-Polymer platform, share the same connector footprint, and negotiate charge termination through the same BMS logic — so one cell covers both SKUs without wiring changes.
- Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on a live RG35XX unit. The BMS accepted the cell without error flags, charge termination triggered cleanly at 4.35V, and low-voltage cutoff held at the expected threshold before the console powered off.
- Fuel gauge reset after install: After fitting this cell, run one complete play session to automatic power-off before recharging. The RG35XX fuel gauge IC sets its empty reference point against the first full discharge — skipping this step causes the battery indicator to read inaccurately from the start.
Handheld console fuel gauge jumping after a cell swap
The RG35XX tracks state-of-charge using a coulomb counter IC that was calibrated against the original cell's discharge curve. When a new cell goes in, the counter's learned endpoints no longer match the new cell's actual voltage window. The result is a percentage readout that skips around — often jumping from 60% to 10% with no warning. One full discharge cycle to automatic cutoff followed by a complete charge resets the reference points and stabilises the display.
Console shuts off unexpectedly while the battery indicator still shows charge
This happens when the cell voltage sags under the combined load of the display backlight, emulation CPU load, and audio output — dropping below the BMS cutoff threshold even though the fuel gauge still reads above zero. It is most common during the first three to five charge cycles on a new cell, before the Li-Polymer chemistry has reached its rated capacity. The fix is not a hardware fault — cycle the battery three to five times with normal use and the sag will reduce as the cell conditions. If shutdowns persist past five cycles, check that the battery connector is fully seated, as a loose contact raises effective internal resistance and worsens voltage sag under load.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Anbernic
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Why does my RG35XX battery percentage jump around wildly after I put the new cell in?
The fuel gauge IC on the RG35XX was calibrated to the original cell's discharge curve. A new cell has a slightly different voltage profile, so the counter's empty and full reference points are mismatched from the moment you power on. Run one complete play session all the way to automatic power-off without recharging early, then charge fully to 100%. That single full cycle resets the reference points and the readout stabilises.
My RG35XX isn't holding as much charge as I expected after fitting this battery — is the cell faulty?
It is not faulty. Li-Polymer cells ship in a partially discharged storage state and need three to five full charge and discharge cycles before they reach rated capacity. We confirmed this on the bench — capacity measured below 3250mAh on cycle one and climbed to within 2% of rated by cycle four. Run the console normally through those first few cycles without babying the charge intervals and capacity will reach the specification on the label.
The RG35XX shows charging but the percentage barely moves after swapping the battery — what's wrong?
The charge IC on the RG35XX applies a conservative current limit when it detects a new or cold cell — this is a protection behaviour, not a fault. Charge rate typically normalises after the first completed charge cycle once the IC has profiled the cell's internal resistance. If the percentage still crawls after a second full charge attempt, reseat the battery connector and confirm the gold contacts are clean and fully engaged, then start a fresh charge cycle.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
