Anbernic Win600 3020E 3050E Replacement Battery 7.4V 4400mAh
This product is shipped directly from our Manufacturer’s Warehouse and typically takes around 1 - 2 weeks to deliver to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Anbernic Win600 3020E 3050E Replacement Battery 7.4V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Anbernic Win600 3020E 3050E Replacement Battery 7.4V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
4400mAh
Anbernic Win600 3020E / 3050E — 7.4V Li-Polymer Replacement Battery (AHB705088-2S1P)
This is a 7.4V 4400mAh (32.56Wh) Li-Polymer cell for the Anbernic Win600 in both 3020E and 3050E configurations. It fits the 5.94-inch Mini Handheld Game PC directly, using OEM part number AHB705088-2S1P. Capacity figures are sourced from the product data, not estimated from third-party teardowns.
- Win600 3020E and 3050E fit: Both variants share the same chassis dimensions and battery bay, running the same 7.4V nominal rail with an identical connector and BMS handshake. Swapping between models is not required — this cell covers both.
- Bench tested on actual hardware: We ran the cell through charge and discharge cycles on the Win600 platform, confirming BMS communication, over-discharge cutoff triggering at the correct low-cell threshold, and clean charge termination at full voltage.
- Fuel gauge calibration on first use: After installation, run one complete play session to automatic cutoff without plugging in early. The Win600's fuel gauge IC sets its empty reference point against the first full discharge — cutting it short leaves the gauge reading high and reporting inaccurate charge levels.
Win600 fuel gauge jumping to a different percentage after cell swap
The Win600 uses a coulomb-counting fuel gauge IC that builds a discharge curve model over time. When a new cell goes in, that model no longer matches the actual cell chemistry, so the reported percentage can jump or reset mid-session. This is not a faulty cell — it is the IC recalibrating. After three to five full discharge and recharge cycles, the gauge IC updates its internal curve and readings stabilise. If jumping persists beyond five cycles, check that the battery connector is fully seated and making clean contact.
Win600 shutting down while the battery indicator still shows charge remaining
Wireless transmission and simultaneous GPU load create brief current spikes that can pull cell voltage below the BMS protection threshold even when the displayed percentage looks safe. A degraded or insufficiently conditioned cell has higher internal resistance, which makes voltage sag under this combined load worse. The BMS reads real-time cell voltage — not the gauge percentage — and cuts power the moment voltage drops below its floor. Run two to three full conditioning cycles to lower internal resistance, and verify the console firmware is current, as some Win600 builds shipped with aggressive BMS cutoff values that a firmware update corrects.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Anbernic
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Why does my Win600 show 30% battery left and then just cut off without warning?
The BMS monitors real-time cell voltage, not the percentage shown on screen. Under combined wireless and GPU load, the new cell can sag below the BMS cutoff threshold even when the fuel gauge still reads high. This gap closes after three to five full discharge cycles as internal resistance drops. If hard shutdowns persist after conditioning, check firmware — some Win600 builds have a known BMS voltage floor that a firmware update adjusts.
My Win600 fuel gauge is jumping around after I put in this replacement — is the battery faulty?
It is not faulty. The Win600's coulomb-counting fuel gauge IC built its discharge model around the original cell's chemistry. A new cell with a slightly different discharge curve causes the IC to report inconsistent percentages until it recalibrates. Run three to five complete discharge-to-cutoff and full-recharge cycles without interruption. Readings will stabilise once the IC has mapped the new cell's actual curve.
The replacement battery doesn't seem to last as long as I expected — did I get a dud cell?
New Li-Polymer cells typically reach rated capacity after three to five conditioning cycles, not on the first charge. The cell ships with a partial charge and the electrode material needs several full cycles to reach full utilisation. Run complete sessions to automatic cutoff, then charge fully each time for the first five cycles. If capacity still feels short after five cycles, check that the battery connector is seated flush — a partial connection increases resistance and reduces usable charge.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
