Asus MeMO Pad HD 7 C11P1311 Replacement Battery 3.8V 3900mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Asus MeMO Pad HD 7 C11P1311 Replacement Battery 3.8V 3900mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Asus MeMO Pad HD 7 C11P1311 Replacement Battery 3.8V 3900mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.8V
Amp
3900mAh
Asus MeMO Pad HD 7 ME175KG / ME715 — 3.8V Li-Polymer Replacement Battery (C11P1311)
This 3.8V, 3900mAh lithium-polymer battery replaces the C11P1311 (also listed as 0B200-00710000) in the Asus MeMO Pad HD 7 tablet, covering models ME715, ME175KG, and K00S among others. It fits the original cell footprint at 93.87 × 90.52 × 3.32mm. Capacity matches the factory spec at 14.82Wh.
- ME175KG and K00S compatibility: These models share the same 3.8V power rail, connector pinout, and BMS handshake protocol as the ME715. One cell covers all listed variants without modification.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on the MeMO Pad HD 7 platform. The BMS accepted the new cell without fault flags, and the charge IC completed a full cycle without thermal events.
- Fuel gauge recalibration after swap: After installation, run the tablet down to automatic shutoff, then charge uninterrupted to 100%. This single full cycle resets the fuel gauge IC against the new cell's actual voltage curve and clears the percentage drift that almost always appears after a battery replacement on this tablet.
MeMO Pad HD 7 shutting down at 15–25% battery remaining
This happens when the fuel gauge IC is still calibrated to the old cell's degraded voltage curve. The new cell hits a different voltage at 20% state of charge than the old one did, and the tablet interprets this as a low-voltage cutoff. The display backlight combined with active WiFi creates a combined load spike that accelerates this. Run one full discharge to automatic shutoff, then charge to 100% without interruption — after that cycle the reported percentage tracks correctly.
Fast charging not available after battery replacement on the MeMO Pad HD 7
Some users see the tablet default to slow charging after a swap, even with the original charger. The charge IC on the MeMO Pad HD 7 runs a negotiation handshake with the battery BMS at the start of each charge session. On a fresh cell, this handshake sometimes fails on the first attempt and the IC falls back to a conservative charge rate. This is not a fault with the replacement cell. Disconnect the charger, wait 30 seconds, and reconnect — most units accept the full charge rate on the second attempt. If it persists, complete one full charge cycle and the negotiation stabilises.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Asus
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My MeMO Pad HD 7 shows 80% battery but shuts off immediately — is the new battery faulty?
The battery is not faulty. The fuel gauge IC inside the tablet was calibrated to the old cell's worn voltage curve, so it misreads the new cell's actual charge level and triggers a premature cutoff. Run the tablet down to automatic shutoff, then charge uninterrupted to 100%. After one complete cycle the fuel gauge recalibrates to the new cell and the shutdowns stop.
The MeMO Pad HD 7 percentage drops from 100% to 70% within the first few minutes of use after I swapped the battery — what's happening?
This is fuel gauge drift, not a capacity problem. The tablet's charge tracking IC uses stored data from the old cell to estimate remaining charge, and the new cell's discharge curve doesn't match that data until a recalibration cycle runs. Let the tablet discharge fully to automatic shutoff, then charge straight to 100% without unplugging early. The percentage display stabilises after that single cycle — no further action needed.
The MeMO Pad HD 7 feels warm near the charging port during the first few charges after fitting this battery — should I be concerned?
Mild warmth during the first few charge cycles is normal. The charge IC on the new cell runs at a slightly higher current acceptance than a degraded original cell, which generates a small amount of heat until the two components settle. We measured surface temperatures on the bench during initial cycling and found them within the acceptable operating range for this tablet. If the device becomes hot to the touch or shows a charging error on screen, stop charging and check that the connector is fully seated at 3.8V.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






