Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Asus Padfone 2 Tablet Compatible Battery C11-P03 3.8V 5100mAh

Up to 19% off
New arrival
Sale priceFrom $45.99 USD Regular price $56.99
Shipping calculated at checkout.
Replaces Asus C11-P03 battery for Padfone 2 Tablet and Padfone 2 A68 Tablet models.
This 3.8V Li-Polymer cell delivers 5100mAh, matching the original pack output.
Connector slides into the internal slot with standard tablet latch alignment.
We bench-tested the pack on discharge cycles; BMS held stable voltage curve throughout.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell and resolves inaccurate percentage display that appears after a swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.8V

Amp

5100mAh

Asus Padfone 2 (A68) Tablet — 3.8V Li-Polymer Replacement Battery (C11-P03)

This is a 3.8V, 5100mAh Li-Polymer replacement battery for the Asus Padfone 2 Tablet, including the A68 variant. It replaces OEM part number C11-P03 — the original cell that powers the tablet during use. If your Padfone 2 no longer holds a charge, shuts down unexpectedly, or won't power on at all, this is the correct replacement cell.

  • Padfone 2 and A68 compatibility: Both variants use the same battery bay dimensions and connector pinout. The C11-P03 cell fits either board revision without modification to the connector or housing.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the Padfone 2 platform. The BMS accepted charge handshake correctly and held voltage within spec across the full cycle without tripping protection cutoff.
  • Fuel gauge recalibration after install: After fitting this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. The Padfone 2 fuel gauge IC calibrates to the installed cell during this cycle. Skipping it causes percentage drift from the first charge.

Padfone 2 shutting down at 15–25% remaining after battery swap

This is a fuel gauge IC issue, not a cell defect. The gauge IC stores calibration data tied to the old cell's internal resistance curve. When the cell is replaced, the reported percentage drifts — the tablet thinks it has charge left but the actual cell voltage has already dropped below the system cutoff threshold. Under combined display and WiFi load, voltage sags faster than the uncalibrated gauge tracks. Running one full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% resets the calibration and resolves the premature cutoff.

Fast charging unavailable on Padfone 2 after cell replacement

The Padfone 2 charge IC uses a protocol handshake at the start of each charge session to determine the safe fast-charge rate for the connected cell. On a freshly installed battery, this negotiation may default to slow charge on the first cycle. This is not a fault with the charger or the cell. Connect the original Asus charger and complete one full charge cycle from low to 100% — on the second cycle, the charge IC accepts the higher current rate and fast charging resumes.

Compatible Models

Padfone 2 Tablet Padfone 2 (A68) Tablet

Replaces Part Numbers

C11-P03

Technical Specifications

Voltage3.8V
Amp Hours5100mAh
Capacity5100mAh
Rate19.38Wh
Net Weight86g /3.03 oz
Gross Weight121g /4.27 oz
Approximate Weight121g /4.27 oz
Dimension 138.68 x 73.61 x 4.12mm

Product Highlights

  • Brand: Asus
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Padfone 2 shows a different battery percentage every time I restart it after fitting the new cell — what's causing that?

The fuel gauge IC on the Padfone 2 mainboard is calibrated to the resistance profile of the original cell. After a swap, it has no reference data for the new cell, so percentage readings are unreliable until recalibration. Run the tablet down to automatic shutoff, then charge uninterrupted to 100% without using the device. That single full cycle gives the gauge IC enough data to lock on to the new cell's voltage curve.

The Padfone 2 gets noticeably warm during the first few charges after I installed the new battery — is something wrong?

Warmth during the first few charge cycles on a new Li-Polymer cell is normal. The charge IC runs a formation-style conditioning pass on an unfamiliar cell, which draws slightly more current than a standard top-up charge and generates more heat. This settles after two or three full cycles as the charge controller learns the cell's acceptance rate. If the tablet becomes hot to the touch or the charge stops mid-cycle, check that the charger output matches the original Asus spec — 5V/2A or the bundled adapter.

The battery percentage on my Padfone 2 drops noticeably faster from 100% down to about 80% than it did before — is the new cell faulty?

This is fuel gauge drift, not a cell capacity problem. The gauge IC overestimates the starting state of charge on a new, uncalibrated cell, so the first portion of discharge looks steep on screen even though actual energy delivery is normal. Complete one full discharge-to-shutoff cycle followed by a full uninterrupted charge — the gauge recalibrates against the real cell voltage and the percentage curve levels out from the next cycle onward.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.