Braun Flex XP 5610 Replacement Battery 1.2V 2000mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Braun Flex XP 5610 Replacement Battery 1.2V 2000mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Braun Flex XP 5610 Replacement Battery 1.2V 2000mAh - is backordered and will ship as soon as it is back in stock.
Voltage
1.2V
Amp
2000mAh
Braun Flex XP 5610 Series — 1.2V Ni-MH Replacement Battery
This is a 1.2V, 2000mAh Ni-MH replacement battery for the Braun Flex XP shaver range, including the 5610, 5614, 5721, 5770, and more than 51 compatible models. It slots into the shaver's internal battery compartment and powers the cutting motor directly. Voltage and cell format match the original factory specification.
- Flex XP series compatibility: These models share a common 1.2V single-cell Ni-MH platform with the same physical cell dimensions (54.10 × 14.20 × 14.20mm) and the same motor drive circuit. The connector orientation and discharge curve are consistent across the lineup, so one cell fits the entire range.
- Bench tested on actual hardware: We cycled this cell through the shaver's charge and discharge circuit on the bench. The Ni-MH chemistry accepted a full charge without overheating, and the motor draw stayed within the expected current band throughout the discharge cycle.
- Post-wash port care: If you rinse the shaver head under water, let the charging port air dry for at least 30 minutes before docking. Moisture bridging the charging contacts creates a fault the shaver reports as a dead battery — the battery is fine, the contacts are not.
Capacity fade from daily partial charging on the Flex XP
Ni-MH cells in shavers are vulnerable to voltage depression when they are topped up every day before they reach a low state. The shaver's indicator drifts because the charge circuit calibrates against a cell that never fully discharges. Over months, the cell loses usable capacity even though it still accepts charge. Running the shaver to a low-motor-speed cutoff before each full charge cycle resets this drift and keeps the cell honest.
Motor speed drops mid-shave before the indicator reads empty
This is a voltage sag symptom, not a capacity problem. Under motor load, a degraded Ni-MH cell's terminal voltage drops faster than the indicator circuit tracks. The indicator still shows charge remaining because it measures resting voltage, not loaded voltage. When you see motor slowdown early in a shave, the cell can no longer sustain the current the motor pulls — typically above 300mA on the Flex XP drive circuit. Replacing the cell restores the loaded voltage above the motor's minimum operating threshold of roughly 1.0V under draw.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Braun
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Braun Flex XP docked on the charging stand overnight but the battery is still flat — is the stand the problem or the battery?
Check the dock contacts first. Cleaning product residue and soap buildup oxidise the metal pins on the Flex XP charging stand, breaking the circuit before the charge ever reaches the battery. Wipe the contacts on both the dock and the shaver base with a dry cotton swab. If the shaver still doesn't charge after clean contact, the battery cell has likely failed and won't accept current — replace the cell.
The shaver gets noticeably warm after a few minutes of use — is that normal or a sign the battery is failing?
Some warmth is expected. In a compact shaver housing, motor heat and battery discharge heat share almost no airflow, so the case gets warm under load. If it becomes hot to hold or the motor audibly slows while warm, the cell is struggling to maintain voltage under current draw — a sign the Ni-MH cell's internal resistance has risen with age. A new cell at full 2000mAh capacity runs cooler because it delivers current with less resistive loss.
I put in the replacement battery but the shaver's charge indicator keeps showing full even after a long shave — what's wrong?
This is a calibration drift from the old Ni-MH cell, not a fault with the new battery. The charge indicator circuit learned the behaviour of the degraded cell and is still reading against those old reference points. Run the shaver on the new cell until the motor slows noticeably, then charge it fully — one complete discharge-to-recharge cycle resets the indicator's baseline and brings the display back in line with actual capacity.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
