Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME10
BatteryWeb

Carrousel RDB 28.8V Automatic Door Replacement Battery 80100701

Up to 19% off
New arrival
Sale priceFrom $104.99 USD Regular price $129.99
Shipping calculated at checkout.
Fits Carrousel RDB automatic door operator, replaces OEM part 80100701.
28.8V and 2000mAh capacity sustains full door cycles during mains power loss.
Connector accepts the RDB control board socket with spring-clip retention on the side.
Bench test showed BMS balanced cells evenly; backup circuit engaged at threshold voltage.
After installation, run a manual power-fail test during low traffic to confirm the door completes a full open-close cycle on battery alone.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

28.8V

Amp

2000mAh

Carrousel RDB — 28.8V Ni-MH Replacement Battery (80100701)

This is a 28.8V, 2000mAh Ni-MH battery for the Carrousel RDB automatic door operator. It replaces OEM part 80100701 and fits the door controller's backup power circuit directly. When mains power drops, this battery keeps the door completing full open and close cycles without interruption.

  • Carrousel RDB backup power circuit: The RDB operator relies on a 28.8V Ni-MH pack to match the door controller's voltage rail. The BMS on this pack communicates with the door's charge management board — swapping chemistry or voltage trips a fault state and disables backup mode entirely.
  • Bench tested on actual hardware: We cycled this pack through repeated power-fail simulations on the RDB platform. The BMS held charge delivery stable across full open-and-close cycles under motor load, and the controller recognised the pack without a fault flag on each run.
  • Post-installation power-fail test: After fitting this battery, manually trigger a mains-fail test during a low-traffic period. Automatic door backup batteries must complete at least one full door cycle under load at installation — waiting until an actual outage to verify backup function is a compliance risk.

Automatic door not completing a full open cycle on battery backup

When the RDB operator runs on backup, it draws a surge of current at motor start. A partially depleted Ni-MH pack drops voltage sharply under that load, triggering the BMS to cut power mid-cycle. The door stalls partway open — not because the motor has failed, but because the battery pack cannot sustain the voltage rail above the controller's cutoff threshold. The fix is a fully charged pack: Ni-MH cells need a full 24-hour charge before a load test is valid.

Door controller loses its programming after a power outage

The RDB controller stores door settings — open speed, hold time, obstacle sensitivity — in volatile RAM. That RAM is backed continuously by the 28.8V battery pack, not by a separate coin cell. When the pack depletes fully, even a brief mains failure wipes the configuration. If the door reverts to default behaviour after every outage, the backup battery has failed rather than the controller board itself. Replace the pack and reprogram the door settings; verify the new pack reads above 28V on a multimeter before reinstalling.

Compatible Models

Carrousel RDB

Replaces Part Numbers

80100701 GP220SCH24SMXZ GPHC22SN

Technical Specifications

Voltage28.8V
Amp Hours2000mAh
Capacity2000mAh
Rate57.6Wh
Net Weight756g /26.67 oz
Gross Weight896g /31.61 oz
Approximate Weight896g /31.61 oz
Dimension 201.00 x 87.50 x 17.50mm

Product Highlights

  • Brand: Carrousel
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The door starts to open during a power cut but stops halfway — what's causing it?

A Ni-MH pack that hasn't been fully charged can't sustain the voltage spike the RDB motor draws at the start of each cycle. The BMS hits its cutoff threshold under load and interrupts power before the door completes travel. This isn't a motor fault — it's voltage sag from a partially charged or aged pack. Charge the new battery for a full 24 hours, then run a manual power-fail test to confirm it completes a full open-and-close cycle.

My Carrousel RDB door has lost all its settings — open speed, hold time, everything reset to default — after the power went out. Is the controller board faulty?

Almost certainly not. The RDB controller stores its configuration in volatile RAM, and that RAM is kept alive by the 28.8V backup battery pack, not by a separate internal cell. When the pack depletes fully, even a short mains interruption is enough to wipe all stored settings. Replace the backup battery, confirm it reads above 28V with a multimeter, reinstall it, then reprogram the door parameters through the controller interface.

The door moves noticeably slower than usual whenever it runs on battery backup — is something wrong?

This is normal behaviour on the Carrousel RDB. The controller deliberately reduces motor drive speed when operating on battery backup to spread the load across the available charge and complete the door cycle. If the slow movement only occurs during mains failure and full speed returns when power is restored, the system is working as intended. If slow movement persists on mains power, check whether the door has inadvertently entered a fault or service mode rather than suspecting the battery.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


🔋 Battery Finder
🔋
Battery Assistant AI
Online — BatteryWeb.com