Dell Inspiron 700m 14.8V Replacement Battery 312-0305
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Dell Inspiron 700m 14.8V Replacement Battery 312-0305 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Dell Inspiron 700m 14.8V Replacement Battery 312-0305 - is backordered and will ship as soon as it is back in stock.
Voltage
14.8V
Amp
2200mAh
Dell Inspiron 700m / 710m — 14.8V Li-ion Replacement Battery (312-0305)
This 14.8V, 2200mAh Li-ion battery replaces the original cell in the Dell Inspiron 700m and 710m ultraportable notebooks. It matches the OEM connector, BMS handshake protocol, and cell chemistry the system expects. Capacity is 32.56Wh, sourced from product data — not estimated.
- Inspiron 700m and 710m platform fit: Both models share the same 14.8V battery rail, identical connector pinout, and the same BMS communication protocol — that is why a single cell works across both. OEM part numbers covered include 312-0305, 312-0306, C7786, D5561, D7310, F5136, G5345, Y4546, and Y4991.
- Bench tested on actual hardware: We ran this cell on the 700m platform and confirmed the BMS handshake completes on first insertion, the BIOS recognises the battery without prompting a firmware alert, and charge current ramps correctly from the AC adapter through all charge stages.
- First-cycle reset on the 700m: After installing, run one full discharge to hibernate cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle. Without it, the system often reports inaccurate health or capacity figures for the first several cycles.
BIOS reporting poor battery health immediately after swap
The Inspiron 700m stores battery health data in EEPROM on the original cell. When a new cell goes in, that EEPROM data is gone and the BIOS flags the battery as degraded or unknown — even though the cell is brand new. This is not a fault with the replacement. Running the full learn cycle described above writes fresh calibration data and clears the warning. After two to three full cycles, reported health should normalise to good.
Laptop shuts down at 20–30% shown on the fuel gauge
This happens when the fuel gauge IC has not yet calibrated against the new cell's actual voltage curve. The gauge thinks the battery still has charge remaining, but the cell voltage has already dropped below the safe cutoff threshold under the combined load of the CPU and display. The system shuts down to protect the cell, not because it is faulty. Complete two full discharge-to-hibernate cycles, then charge to 100% each time — by the third cycle the fuel gauge IC recalibrates and the shutdown point shifts back to the correct low-battery threshold near 5%.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Dell
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Inspiron 700m BIOS shows the new battery as "unknown" or gives a health warning right after I installed it — is the cell dead on arrival?
No — the BIOS is reading stale EEPROM data from the old cell, not the new one. Once the old cell is removed, that calibration record is gone and the system flags the replacement as unrecognised. Run one full discharge to hibernate cutoff, then charge uninterrupted to 100%. That learn cycle writes fresh data and clears the health warning within two to three cycles.
My Inspiron 700m shows the battery as fully charged but the Wh figure in Dell's battery meter is wrong — it says something much lower than 32.56Wh. What's causing that?
The Wh figure displayed comes from EEPROM-stored rated values on the original cell, not a live measurement of the new one. When the old cell is swapped out, the system may briefly display residual or default Wh data until the fuel gauge IC recalibrates. Complete two full discharge-and-recharge cycles and the reported Wh figure will align with the actual cell capacity of 32.56Wh.
Charge stops at around 80% and won't go higher — is this a faulty batch?
Not a batch issue. The Inspiron 700m BIOS includes a firmware-controlled charge limit that activates when the battery health record indicates a degraded or uncalibrated cell. The system caps charge current early as a precaution. Clear the condition by running the battery learn cycle: discharge fully to hibernate cutoff, then plug in and charge without interruption to 100%. Once the BIOS logs a completed cycle against the new cell, the 80% cap lifts.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
