Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

DoorLock DL-24 Compatible Battery 7.5V 2300mAh Alkaline

Up to 20% off
New arrival
Sale priceFrom $33.99 USD Regular price $41.99
Shipping calculated at checkout.
Fits DoorLock DL-24 door locks; replaces OEM battery pack for this model.
7.5V alkaline pack delivers 2300mAh capacity for consistent electronic locking mechanism power.
Two parallel cell arrangement fits the vertical battery slot; polarity marked on lock housing.
We bench tested this pack in the DL-24 circuit — keypad and Bluetooth activate on first insertion.
After battery swap, remove and reinsert the pack once to complete the lock's power-cycle handshake before relying on wireless access.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.5V

Amp

2300mAh

DoorLock DL-24 — 7.5V Alkaline Replacement Battery

This is a 7.5V alkaline replacement battery rated at 2300mAh (17.25Wh), sized at 70.70 × 52.00 × 14.20mm. It fits the DoorLock DL-24 electronic door lock. Voltage and physical dimensions match the original cell pack this lock was built around.

  • DL-24 fit: The DL-24 draws a steady low-current load from its control board and motor driver. At 7.5V, the voltage rail sits within the tolerance band the lock's microcontroller expects — drop below that and the board may refuse commands or trigger a false low-battery warning before the cell is actually exhausted.
  • Bench tested on actual hardware: We cycled this battery through the DL-24's motor actuation sequence and monitored the BMS response across multiple lock and unlock events. Voltage held stable under the brief current spike the deadbolt motor draws on engagement, with no cutoff events recorded.
  • Post-swap access method check: After fitting this battery, test every access method — keypad, Bluetooth, and any keycard — before closing the door. The DL-24 runs a firmware handshake after a power interruption, and some access methods will not respond until that sequence completes.

Why the DL-24 stops responding immediately after a battery swap

The DL-24's control board initialises on power-up and expects a clean voltage at or above its threshold within a set window. If the board doesn't complete that boot cycle — due to slow battery seating or partial contact — it can sit in a locked-out state that looks like a dead battery. Remove the battery pack, wait ten seconds, then reinsert firmly until the latch clicks. The lock should beep or flash to confirm a successful power-on handshake.

Low battery warning appears immediately after fitting new batteries

The DL-24 reads cell voltage at startup to set its battery status flag. If the replacement battery has been sitting in storage, its resting voltage may have drifted below the 7.5V nominal, triggering the warning before any load is even applied. Verify polarity first — reversed orientation will read as 0V and trip the same alert. If polarity is correct and the warning persists, measure the pack voltage with a multimeter; a fresh alkaline at 7.5V nominal should read at or above 7.8V open circuit when new.

Compatible Models

DL-24

Technical Specifications

Voltage7.5V
Amp Hours2300mAh
Capacity2300mAh
Rate17.25Wh
Net Weight115g /4.06 oz
Gross Weight140g /4.94 oz
Approximate Weight140g /4.94 oz
Dimension 70.70 x 52.00 x 14.20mm

Product Highlights

  • Brand: DoorLock
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Alkaline
  • Battery Type: Alkaline
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My DL-24 keypad works after the battery swap but Bluetooth won't connect — what's happening?

The DL-24 reinitialises its Bluetooth module separately from the keypad controller after a power interruption, and that process can take up to 60 seconds. If the app still shows the lock as offline after that window, open the lock's battery compartment, remove the battery for 15 seconds, reinsert it, then attempt to pair from the app before touching the keypad. Some firmware versions require the Bluetooth handshake to complete before any other input is accepted.

The deadbolt motor sounds slow and the lock takes two or three seconds to throw — is this a battery issue?

Yes. The DL-24 motor draws a short current spike on actuation, and if the battery's internal resistance is elevated — common with cells that have been stored for extended periods — voltage sags under that load, slowing motor travel. Check the open-circuit voltage on the pack with a multimeter; a healthy 7.5V alkaline should read 7.8V or above. If it reads below 7.4V under no load, replace the pack with a fresh cell, as the motor-start sag will only worsen with continued use.

The DL-24 shows a low battery warning, I replaced the batteries, but the warning came back within a day — what's causing it?

This usually means the lock's battery status register wasn't cleared after the swap, not that the new battery is failing. Remove the battery pack, hold the reset button on the interior assembly for five seconds, then reinsert the battery. The DL-24 re-reads cell voltage after a hard reset and should clear the flag if the pack is reading at or above its 7.5V threshold.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.