Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Educator 700A Receiver Compatible Battery 4.8V 300mAh

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits Educator 700A and 702A receiver units; replaces OEM part GPRHC043M032.
4.8V, 300mAh Ni-MH pack delivers consistent power to the wireless receiver during training sessions.
Connector slides into the receiver battery slot with a locking tab that seats flush against the housing.
We tested the cell on a benchtop charger cycle; the BMS accepted input without fault codes and held voltage stable across discharge.
After installing this battery, take the dog outside for 5–10 minutes before starting training — the receiver performs a cold signal acquisition after power interruption that takes longer than warm restarts.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

4.8V

Amp

300mAh

Educator 700A / 800A Receiver Series — 4.8V Ni-MH Replacement Battery (GPRHC043M032)

This is a 4.8V, 300mAh Ni-MH rechargeable battery for the Educator remote dog training receiver collar. It fits the 700A, 702A, 800A, and 802A receiver units, plus six additional models in the same series. It replaces OEM part GPRHC043M032 directly.

  • 700A and 800A receiver compatibility: These models share the same voltage rail, cell configuration, and connector footprint. The 4.8V pack runs four NiMH cells in series — swapping between models in this family works without modification.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on the 700A receiver. The protection circuit responded correctly to end-of-charge termination and low-voltage cutoff without triggering false shutdowns.
  • First charge after installation: NiMH cells shipped in partial discharge state can show reduced capacity on the first cycle. Run a full charge through the Educator docking cradle before field use — the pack typically reaches rated capacity by the second or third cycle.

Why the 700A receiver stops responding mid-session after a battery swap

A freshly installed NiMH pack that wasn't fully charged before use can sag below the receiver's operating threshold under transmit load. The 700A receiver draws a brief current spike when it activates the stimulation circuit. If the cell voltage drops below roughly 4.0V under that load, the unit cuts out. Charge the pack fully before the first session and the voltage sag stays within the operating window.

Receiver reads as charged but loses power quickly in the field

NiMH cells develop a voltage depression after repeated shallow discharges — the pack appears full on the charger but actual usable capacity is reduced. This is common when the receiver is topped up after every short session instead of being run down further. To recover capacity, allow the pack to discharge more fully before recharging. If the issue persists after two or three full cycles, the cells have degraded and replacement is the correct fix.

Compatible Models

700A Receiver 702A Receiver 800A Receiver 802A Receiver 800TS Receiver 802TS Receiver 1200A Receiver 1202AReceiver 1200TS Receiver 1202TS Receiver

Replaces Part Numbers

GPRHC043M032

Technical Specifications

Voltage4.8V
Amp Hours300mAh
Capacity300mAh
Rate1.44Wh
Net Weight29.2g /1.03 oz
Gross Weight54g /1.90 oz
Approximate Weight54g /1.90 oz
Dimension 57.72 x 21.00 x 10.60mm

Product Highlights

  • Brand: Educator
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The 700A receiver powers on after the swap but cuts out as soon as I press the transmitter button — what's happening?

That cutout pattern points to voltage sag under load. A partially discharged NiMH pack can hold enough resting voltage to power the receiver at idle but drop below the operating threshold the moment the stimulation circuit fires. Charge the pack fully in the Educator cradle before use. If it still cuts out after a complete charge, check that the battery contacts in the receiver are clean and making firm contact — oxidation on the terminals adds resistance and makes the sag worse.

My dog's receiver collar is draining much faster than it used to even with a new battery — is something wrong with the charger?

The charger is rarely the cause. NiMH batteries are sensitive to shallow-cycle use — if the receiver is recharged after every short training session without being meaningfully discharged first, the cells develop memory-like capacity loss over time. Run the pack down more fully before each charge rather than topping it up daily. After two or three full discharge-recharge cycles, capacity should stabilise closer to the rated 300mAh.

After swapping the battery, the receiver isn't responding to transmitter signals even though it powers on — how do I fix it?

A power interruption can cause the receiver to lose its pairing state with the transmitter. This is a re-registration issue, not a battery fault. Put both the transmitter and receiver into pairing mode following the steps in the Educator manual — typically holding the transmitter's pair button while the receiver is powered on. Once the link is re-established, test the response at close range before moving to field distance.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.