Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Fabrica Tablet PC 10.1 Compatible Battery 3.7V 3000mAh

Up to 20% off
New arrival
Sale priceFrom $27.99 USD Regular price $34.99
Shipping calculated at checkout.
Fits Fabrica Tablet PC 10.1 and replaces OEM battery CS-BLP200SL.
3.7V lithium-polymer cell with 3000mAh capacity delivers 11.1Wh to this tablet.
Connector type and orientation match the original battery slot precisely without modification.
We bench-tested this cell on a standard charge cycle — BMS accepted the pack cleanly with no fault codes.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell and resolves the inaccurate percentage display that appears after a swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

3000mAh

Fabrica Tablet PC 10.1 — 3.7V Li-Polymer Replacement Battery

This is a 3.7V, 3000mAh (11.1Wh) lithium-polymer battery for the Fabrica Tablet PC 10.1. It replaces the original cell when the tablet no longer holds a charge or powers on. Dimensions are 112.65 × 68.00 × 3.50mm — verify these against your existing cell before installing.

  • Fabrica Tablet PC 10.1 fitment: This tablet uses a flat Li-Polymer pouch cell with a low-voltage 3.7V nominal rail. The connector pinout and cell dimensions match the original, so no adapter or modification is needed at the connector.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the bench. The BMS accepted the charge IC handshake without fault flags, and cell voltage held stable across the discharge curve.
  • Post-swap fuel gauge reset: After fitting this battery, run the tablet down to automatic shutoff once, then charge it uninterrupted to 100%. This forces the fuel gauge IC to recalibrate against the new cell's actual capacity and clears the inaccurate percentage readings that commonly appear after a swap.

Tablet shutting down at 15–25% after battery replacement

This happens because the fuel gauge IC is still calibrated to the old, degraded cell. When the new cell hits roughly 3.6–3.7V under display and WiFi load combined, the controller reads that voltage against the old discharge curve and triggers an early shutoff. The fix is one complete discharge-to-cutoff cycle followed by a full uninterrupted charge. After that single cycle, the IC maps the new cell's curve and the early shutdowns stop.

Fast charging not available after swapping the battery

Some tablets withhold fast-charge negotiation until the charge IC has completed at least one accepted charge cycle on the new cell. Until that cycle completes, the device defaults to standard 5V charging as a precaution. Plug in with the original cable and charger and allow one full charge from low to 100% without interruption. Fast charge should be available from the next session once the cycle is logged.

Compatible Models

Tablet PC 10.1

Technical Specifications

Voltage3.7V
Amp Hours3000mAh
Capacity3000mAh
Rate11.1Wh
Net Weight56g /1.98 oz
Gross Weight91g /3.21 oz
Approximate Weight91g /3.21 oz
Dimension 112.65 x 68.00 x 3.50mm

Product Highlights

  • Brand: Fabrica
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Fabrica Tablet PC 10.1 is showing 60% battery but suddenly shuts off — is the new battery faulty?

Almost certainly not faulty — the fuel gauge IC is still mapped to the old cell's degraded discharge curve. When the new cell's voltage dips briefly under the combined load of the display and WiFi, the controller misreads it as empty and shuts down. Run the tablet to automatic cutoff once, then charge uninterrupted to 100%. That single calibration cycle realigns the IC to the new cell and the false shutoffs stop.

The Fabrica tablet feels warm near the charging port while charging after the battery swap — should I be concerned?

Mild warmth during the first few charge cycles is normal. The charge IC on a fresh Li-Polymer cell draws a higher initial current during the bulk-charge phase, which generates more heat than a well-cycled cell does. As long as the tablet is not hot to the touch and charging in a ventilated spot, there is nothing wrong. If it becomes genuinely hot — uncomfortable to hold — disconnect and check that you are using the original charger, not a higher-wattage USB-C adapter.

Battery percentage on my Fabrica Tablet PC 10.1 drops fast from 100% but then slows down — why does it read 100% for so long and then fall quickly?

This is fuel gauge drift caused by the IC calibrating off the old cell's reference points. The new cell has a flatter voltage curve near the top of charge, so the gauge holds at 100% longer than it should, then appears to drop quickly through the mid-range. One full discharge-to-automatic-shutoff followed by a complete charge to 100% resets the reference. After that cycle, percentage should track evenly across the full range.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.