Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Fuji 8FF60 Replacement Battery 6V 4200mAh Ni-MH

Up to 19% off
New arrival
From $50.99 USD $62.99
Shipping calculated at checkout.
Fits Fuji 8FF60 and CVC-600 camera bodies; replaces OEM battery 6V 4200mAh Ni-MH pack.
6V and 4200mAh output delivers 25.2Wh total energy for extended shooting sessions without mid-shoot power drops.
Connector slides straight into camera slot with positive contact alignment; locking tab seats flush when fully inserted.
We bench tested this Ni-MH cell across multiple charge cycles; BMS accepted the pack on first install without error codes.
On first use, run one full charge cycle through the camera body itself before heavy shooting — Fuji firmware maps capacity to discharge curve during that cycle.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

6V

Amp

4200mAh

Fuji 8FF60 / CVC-600 Series — 6V Ni-MH 4200mAh Replacement Battery

This is a 6V, 4200mAh Ni-MH replacement battery for Fuji camera models including the 8FF60, CVC-600, CVT-60, and CVT-70, plus over 59 additional compatible models. It matches the original cell's voltage rail and physical form factor. Capacity is rated at 25.2Wh from the manufacturer spec.

  • 8FF60 and CVC series compatibility: These models share the same 6V battery bay, connector pin-out, and BMS communication protocol. One cell fits across the range without modification or adapter.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on compatible camera hardware. The BMS accepted the cell cleanly, voltage held steady through mid-cycle, and the protection circuit tripped correctly at low-voltage threshold — no false cutoffs detected.
  • First-cycle BMS acceptance: On initial install, complete one full charge cycle through the camera body or OEM charger before heavy shooting. Some Fuji camera BMS firmware maps the discharge curve during that first cycle — skipping it can cause the battery indicator to read inaccurately for the first several uses.

Flash not fully recycling between shots on a fresh battery

Flash capacitor recharge pulls a short, high-current burst from the cell each time. A Ni-MH cell that hasn't completed its first charge cycle may sag briefly under that demand, slowing recycle time. This is not a faulty cell — it's the cell operating before its electrolyte has fully conditioned. After two or three complete charge and discharge cycles, internal resistance drops and recycle speed normalises.

Battery percentage jumping erratically on the camera display

The camera's fuel gauge maps voltage thresholds to percentage bands calibrated against the original cell's discharge curve. A new Ni-MH cell discharges slightly differently until it's been cycled a few times, which causes the indicator to skip levels or jump backward. This is a display mapping issue, not a capacity fault. Run two full charge-to-discharge cycles and the indicator will track more accurately against the actual cell state.

Compatible Models

8FF60 CVC-600 CVT-60 CVT-70 CVT70 F-22SW F-60WIDE F-120SW F-122SW F-128SW F-610 F-610AF F-615 F-615AF F-620 F-620AF F-630DE F-650 F-650AF F-660 F-690 F-810 F-820 F20 FF-60 FF-60WIDE FF-120SW FF-122SW FG-120 FG-122SW FH-80 FH-80-Hi8 FH-80Hi8 G-806-7 G-806-T G-901-T H-20 H-128SW Hi-8 HP-40 HP-40PROJ M-600AF M-660 M-680 M-690 M-830-HRHi8 M-830HR M-860 M-880 M-890 NP-55 NP-77 P-650 P-660 P-670 P-680 P-830 P-850 V-8 V8F-601 V8F-615 V8F-620 V8F-650

Technical Specifications

Voltage6V
Amp Hours4200mAh
Capacity4200mAh
Rate25.2Wh
Net Weight313g /11.04 oz
Gross Weight374.5g /13.21 oz
Approximate Weight374.5g /13.21 oz
Dimension 88.95 x 47.55 x 36.50mm

Product Highlights

  • Brand: Fuji
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Fuji camera shows a dead battery icon even though I just charged this replacement — what's happening?

The camera's BMS does a voltage handshake on power-up, and a new Ni-MH cell can sit slightly below the acceptance threshold before its first full conditioning cycle. Place the battery in the OEM charger or charge it fully via the camera body, then power cycle the camera once. That single full charge cycle is usually enough for the BMS to accept the cell and display correctly.

Shot count dropped noticeably compared to what I got with the original battery — why?

A new Ni-MH cell runs below rated capacity for the first three to five cycles while the chemistry conditions. Flash discharge, continuous autofocus, and image stabilisation all add draw beyond the base spec — stacking those features cuts shot count further than rated figures suggest. Cycle the battery fully two or three times before judging capacity. If shot count remains low after five cycles, check that the flash recycle indicator is fully lit before shooting — partial recycle draws more current per shot.

The camera body gets noticeably warm during longer video recording sessions — is the battery causing that?

The battery is not the primary heat source. Sustained video combines sensor readout, image processor load, and stabilisation draw simultaneously — that load pulls more continuous current than stills shooting, and the current flow through both the cell and the camera's internal regulators generates heat. The Ni-MH cell itself runs warmer than Li-ion under sustained draw, which adds to body temperature. Keep the camera out of direct sunlight during long recordings and allow a cool-down period between extended video clips if surface temperature becomes a concern.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Infrared Solutions 525 Snapshot Portable Infrared Camera Replacement Battery, 6V, 4200mAh, Ni-MH 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections