Hiab Hi Drive 4000 Replacement Battery, 7.2V, 2000mAh Ni-MH
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Hiab Hi Drive 4000 Replacement Battery, 7.2V, 2000mAh Ni-MH - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Hiab Hi Drive 4000 Replacement Battery, 7.2V, 2000mAh Ni-MH - is backordered and will ship as soon as it is back in stock.
Voltage
7.2
Amp
2000mAh
Hiab Hi Drive 4000 Replacement Battery — 7.2V Ni-MH Crane Remote
Your crane stops working mid-lift — not because of the crane, but because of a dead remote battery. It happens more than it should. And when it does, the whole job stops. This 7.2V Ni-MH replacement battery fits Hiab crane remotes and is built to drop right in and get you back to work. No wiring, no modifications — just swap it out and you're running again.
- Direct drop-in fit: Matches OEM dimensions exactly so it fits the remote compartment like the factory battery.
- Technician tested: Verified on actual Hiab remote units before listing — powers on, holds charge, works as it should.
- Wide compatibility: Fits Hi Drive 4000, Combi Drive 5000, XS Drive, and Olsberg remote systems.
Consistent power for crane remote operation
The Hiab Hi Drive 4000 remote demands stable voltage across full working cycles. A weak battery doesn't die cleanly — it drops signal mid-operation, causes E54 errors, and creates ghost faults that waste hours of diagnostic time. This 2000mAh Ni-MH cell holds voltage under transmission load the way the original battery was designed to.
Fits across the Hiab remote lineup
One battery covers most Hiab remote generations. It works with the Hi Drive 4000, Hi Drive 4000 ET, Combi Drive 5000, XS Drive, Olsberg DOH116A and Dulevo 5000 Combi. The voltage and connector stayed consistent across these platforms — no adapters, no guesswork.
Built for industrial daily use
Crane remotes run hard — cold cabs, long shifts, rough handling. This Ni-MH cell is rated for that kind of use. With proper charging habits it lasts 2 to 4 years. Recharge when you notice signal drop rather than letting it fully drain — that keeps the cells healthy and extends the battery well beyond what most cheap replacements manage.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Hiab
- Manufacturer: Brightway Group
- Color: Black
- Product Type: Ni-MH
- Battery Type: Crane Remote Control
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Temperature Range
Frequently Asked Questions
Q1: My Hiab remote shows E54 error — is the battery actually dead or just low?
E54 means the remote battery dropped below the minimum voltage to transmit. It doesn't always mean the battery is completely dead. We see this a lot when the battery hasn't been charged in a few weeks. Put it on charge for a full cycle first. If E54 comes back within an hour of use, the battery cells are worn out and it needs replacing.
Q2: Remote turns on fine but the crane stops responding after a few minutes — what's going on?
This is almost always a weak battery. The remote powers up fine on resting voltage but can't hold it under transmission load. The signal drops the moment the remote tries to send commands to the receiver. We've seen this exact issue on Hi Drive 4000 and XS Drive units. Swap the battery before you start chasing receiver or antenna problems.
Q3: Will an aftermarket battery work the same as the original Hiab battery?
Yes, as long as the voltage and chemistry match — 7.2V Ni-MH. The remote doesn't care who made the battery cells. What matters is that the voltage is correct and the connector fits. We test every batch on actual Hiab remote units before listing. The only thing the OEM battery has going for it is the Hiab logo and a much higher price tag.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




