HP Mini 110-350 10.8V Replacement Battery 614873-001
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
HP Mini 110-350 10.8V Replacement Battery 614873-001 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
HP Mini 110-350 10.8V Replacement Battery 614873-001 - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
4400mAh
HP Mini 110-350 Series — 10.8V Li-ion Replacement Battery (614873-001)
This is a 10.8V, 4400mAh (47.52Wh) Li-ion battery for the HP Mini 110-350 and 110-360 series netbooks. It replaces OEM part numbers including 614873-001, HSTNN-IB1Y, HSTNN-LB1Y, and over two dozen cross-reference codes covering the Mini 110-350er, 110-360STU, and related variants. The cell uses the same connector pinout and BMS profile as the original HP pack.
- Mini 110-350 and 110-360 platform fit: These models share the same 10.8V three-cell series configuration, connector housing, and EEPROM communication protocol. One cell pack covers the full range because the BMS handshake and charge termination logic are identical across all variants listed.
- Bench tested on actual hardware: We ran this cell on the Mini 110-350 platform and confirmed the BMS negotiated correctly with the BIOS — charge accepted, fuel gauge initialised, and no "unknown battery" flag on first boot.
- First-cycle calibration on the Mini 110 series: After installing, run one full discharge to hibernate cutoff, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell's actual capacity and clears the inaccurate health warning that appears after every cell swap on this platform.
Why the Mini 110 BIOS flags a new battery as poor health
The Mini 110 series stores capacity and cycle data in EEPROM on the battery pack itself. When a new cell is installed, the BIOS compares the new cell's EEPROM data against its learned baseline from the old pack. The mismatch triggers a low-health or "replace battery" warning even though the cell is brand new. One full discharge-to-hibernate followed by an uninterrupted charge to 100% resets that learned baseline and clears the flag within one to two cycles.
Mini 110 shutting down at 20–30% charge shown on the gauge
This happens when the fuel gauge IC has not yet calibrated against the new cell's voltage curve. The gauge reports 20–30% remaining, but the cell voltage has already dropped below the BIOS cutoff threshold under combined CPU and display load. It is a calibration gap, not a faulty cell. Run two full discharge-to-hibernate and full-charge cycles — after that, the fuel gauge IC tracks the actual cell voltage and the shutdowns stop. Target cell voltage at full charge is 12.6V across the three-cell pack.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: HP
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The HP Mini 110 BIOS shows "0% available (plugged in, charging)" and never moves — what's wrong?
The fuel gauge IC on the Mini 110 platform needs calibration cycles against the new cell before it reports accurately. The EEPROM data from the old pack left a stale baseline that the BIOS is still reading. Unplug the adapter, run the laptop on battery until it hibernates from low power, then charge uninterrupted to 100% without using the laptop. Repeat that cycle once more and the gauge will track correctly.
Windows Health report says this battery has a design capacity of 47,520mWh but full charge capacity reads much lower on the first cycle — is the cell defective?
This is normal after a fresh cell swap on the Mini 110 series. The BIOS pulls the rated Wh figure directly from the new cell's EEPROM — 47.52Wh in this case — but the fuel gauge IC has not yet measured the actual deliverable capacity against a full discharge cycle. The reported full charge capacity converges toward the rated figure after two complete discharge-to-hibernate and full-charge cycles. Check the report again after those two cycles before drawing any conclusions.
The HP Mini 110 charges to 80% then stops — adapter light stays on but the gauge won't move past 80%
Some Mini 110 units have a BIOS-controlled charge limit that activates when the firmware detects battery wear on the previous pack. The limit is stored in firmware, not the battery itself, so a new cell does not automatically clear it. Go into HP Battery Check or the BIOS power settings and confirm the charge limit is set to 100% rather than the adaptive or economy threshold. If no setting is visible, update the BIOS to the latest version — HP released firmware revisions for this series that reset the charge ceiling after a pack swap.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
