HP Mini 210-3000 Replacement Battery 11.1V 4400mAh 646657-251
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
HP Mini 210-3000 Replacement Battery 11.1V 4400mAh 646657-251 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
HP Mini 210-3000 Replacement Battery 11.1V 4400mAh 646657-251 - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
4400mAh
HP Mini 210-3000 / Pavilion DM1-4000 — 11.1V Li-ion Replacement Battery (646657-251)
This is an 11.1V 4400mAh (48.84Wh) Li-ion battery for the HP Mini 210-3000, Pavilion DM1, DM1-4000, and Mini 110-4100 series netbooks. It replaces OEM part numbers 646657-251, 646657-241, 646755-001, HSTNN-DB3B, HSTNN-LB3B, MT03, MT06, and related HP part codes. Physical dimensions are 202.10 x 50.70 x 21.50mm — check yours before ordering.
- Mini 210-3000 and DM1-4000 compatibility: Both platforms share the same 11.1V three-cell battery rail, identical connector pinout, and compatible BMS handshake — which is why one cell covers all models in this group without firmware conflicts.
- Bench tested on actual hardware: We cycled this cell through full charge and discharge on a DM1-4000 unit. The BMS communicated correctly with the BIOS, charge current tapered normally at top-of-charge, and the protection circuit tripped cleanly at low-voltage cutoff with no hard shutdowns during mid-cycle load.
- First-cycle calibration on HP netbooks: After installing, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.
Why the Mini 210-3000 shuts down at 20–30% shown on the gauge
The fuel gauge IC estimates remaining capacity based on learned voltage curves from the previous cell. After a swap, those curves are stale. Under combined CPU and display load, the new cell's actual voltage drops faster than the old profile predicts — and when voltage hits the BMS cutoff threshold, the system shuts down before the gauge reaches zero. Running two full calibration cycles retrains the IC against the new cell's discharge curve. After calibration, shutdown should align with the gauge reading near 5% or hibernate-cutoff.
BIOS reporting battery health as "poor" or "unknown" after installing a new cell
The HP BIOS reads health status from EEPROM data stored in the battery's fuel gauge IC, not from live cell measurements. A replacement cell ships with factory EEPROM defaults that don't match the laptop's charge history, so the BIOS flags it as degraded or unknown on first boot. This is not a fault with the cell. Perform the full discharge-to-hibernate then uninterrupted charge-to-100% cycle — after one or two complete cycles, the BIOS learn cycle overwrites the stale EEPROM values and the health status corrects to normal.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: HP
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My HP Mini 210-3000 shows the new battery as 0% and won't charge past that — is the cell dead out of the box?
The fuel gauge IC on a fresh cell has no learned capacity data, so the OS sometimes reads 0% or refuses to show a charge value until the BIOS initialises the battery. Connect the charger and leave it uninterrupted for a full charge cycle without powering the laptop on. If the charge LED changes state and the BIOS POST screen shows a voltage above 10.8V, the cell is functioning — the gauge just needs one full cycle to report correctly.
The HP BIOS battery check utility says the Wh rating doesn't match what's listed — should I be worried?
The Wh figure the BIOS displays is pulled from the cell's EEPROM, which stores the manufacturer's rated value at factory calibration. The 48.84Wh on the product listing reflects actual cell chemistry at standard conditions. Small discrepancies between EEPROM-reported and listed Wh are normal across replacement cells and do not affect charge or discharge behaviour. If the BIOS reports a figure in the 44–50Wh range, the cell is correct — no action needed.
After swapping the battery, the charge stops at 80% and the laptop won't go higher — is the new cell faulty?
On many HP Mini and DM1 units, the BIOS includes a battery charge limit setting — sometimes labelled "Battery Care Function" — that caps charging at 80% to reduce cell wear. This is a firmware setting, not a battery fault. Go into the BIOS setup at POST (F10 on most HP Mini models), find the Battery Care Function option, and set it to Full Charge (100%). Save and exit, then reconnect the charger.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
