Kenwood KNB-74L TH-D74 7.4V Replacement Battery 1800mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Kenwood KNB-74L TH-D74 7.4V Replacement Battery 1800mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Kenwood KNB-74L TH-D74 7.4V Replacement Battery 1800mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
1800mAh
Kenwood TH-D74 / TH-D75 Series — 7.4V Li-ion Replacement Battery (KNB-74L)
This 7.4V 1800mAh Li-ion battery replaces the KNB-74L, KNB-74LW, KNB-75L, KNB-75LAM, and KNB-75LW packs used in the Kenwood TH-D74, TH-D74A, TH-D74E, and TH-D75 handheld transceivers. These radios are dual-band amateur handhelds commonly used in field comms and emergency response. The pack ships at storage voltage and requires a full charge cycle before deployment.
- TH-D74 / TH-D75 platform fit: Both models share the same 7.4V battery rail, connector pinout, and BMS handshake protocol — one pack covers the entire current D-series lineup without modification.
- Bench tested on actual hardware: We ran this pack through insertion and charge cycles on a TH-D74A. The BMS negotiated correctly with the dock on first contact, and the protection circuit responded to simulated transmit-draw spikes without tripping.
- First insertion on the KSC-35 dock: If the dock LED blinks amber instead of switching to solid red on first insertion, remove the pack, wipe the gold contact strip with a dry cloth, and reseat firmly — the TH-D74 charger requires a clean contact cycle to register the new BMS before charging begins.
Why the TH-D74 cuts out mid-transmission on a freshly inserted pack
The TH-D74 draws a sharp current spike the moment PTT is pressed — transmit current can jump to 1.5A or higher in the first milliseconds of keying. A new pack sitting at storage voltage (typically around 3.7V per cell) has higher internal impedance than a fully charged cell, which causes a momentary voltage sag. If that sag pushes the pack below the BMS undervoltage threshold, the protection circuit trips and the radio cuts off immediately. A full charge cycle before first use brings cell voltage to 4.2V per cell and lowers impedance enough to handle the transmit surge cleanly.
Bar indicator showing one fewer bar than expected after a full charge
The TH-D74 reads battery level from pack terminal voltage using fixed thresholds — it does not track charge history. A new cell fresh off the charger may rest at 8.3–8.35V rather than the full 8.4V nominal, which can land just below the threshold for the top bar. Let the radio sit powered on for two to three minutes after removing it from the dock — the surface charge dissipates and the resting voltage settles to a reading the radio maps correctly. If the indicator still reads low, return the pack to the dock for an additional 30-minute top-up and confirm dock LED shows green before removing.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Kenwood
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My KSC-35 dock LED keeps blinking and never switches to solid — the battery is brand new, what's wrong?
A blinking dock LED on first insertion almost always means the charger hasn't completed its BMS handshake with the new pack. Remove the battery, wipe the gold contact strip on the pack with a dry lint-free cloth, and reseat it firmly until you feel it click. If the LED still blinks after 60 seconds, check that the dock contacts aren't oxidised — clean them with a dry cotton swab, then reinsert. A solid red charge light should appear within 10 seconds of a clean contact cycle.
The TH-D74 drops to low TX power after a few transmissions even though the battery indicator still shows three bars — what's happening?
This is voltage sag under sustained RF output, not a faulty cell. When the radio transmits repeatedly without a long receive pause, the pack's terminal voltage drops faster than the bar indicator updates — the radio's power management circuit detects the sag and steps down transmit power to protect the finals, even while the bar display still reads high. Let the radio sit in receive mode for 60–90 seconds between extended TX bursts to allow the cell voltage to recover. If sag continues after a full charge cycle, measure pack terminal voltage under load — it should stay above 7.0V during transmit.
The TH-D74 won't power on at all after the battery sat unused in a drawer for several months — is the pack dead?
Extended storage can push a Li-ion cell below the BMS recovery threshold, causing the protection circuit to lock out the pack entirely. Place the battery in the KSC-35 dock and watch the LED — if it shows no light at all for more than two minutes, the dock is rejecting the pack as below acceptance voltage. Try a different dock or a compatible charger that supports a trickle pre-charge mode to bring the cell back above 6.0V total pack voltage. Once the charger accepts the pack and the LED goes solid red, allow a full uninterrupted charge before reinserting into the radio.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
