Kobalt KB624-03 24V Drill Battery Replacement 1500mAh Li-ion
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Kobalt KB624-03 24V Drill Battery Replacement 1500mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Kobalt KB624-03 24V Drill Battery Replacement 1500mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Voltage
24V
Amp
1500mAh
Kobalt KRAD 1224B-03 / KHD 524B-03 — 24V Li-ion Replacement Battery (KB624-03)
This is a 24V Li-ion battery pack rated at 1500mAh (36Wh), built to replace the original Kobalt KB624-03 and its compatible variants. It fits the KRAD 1224B-03 drill/driver, KHD 524B-03, KDD 524B-03, and related Kobalt 24V platform tools. The connector and BMS communication lines match the original pack — no adapter required.
- Kobalt 24V platform fit: The KRAD 1224B-03, KHD 524B-03, and KDD 524B-03 share the same 24V rail, slide-on connector format, and BMS handshake protocol. That's why one pack — KB624-03, KB524-03, KB424-03, KB224-03, or KB124-03 — crosses all of them.
- Bench tested on actual hardware: We cycled this pack through a 24V Kobalt drill under full torque loads. The BMS correctly managed motor-start inrush current and held the voltage rail stable across repeated trigger pulls without false overcurrent trips.
- First-use inrush profiling: Run the drill at half load for two cycles before going full torque. This lets the BMS log the motor's inrush current signature and set its overcurrent threshold accurately — reducing nuisance cutoffs during heavy fastening tasks later.
BMS cutoff on motor-start inrush in the KRAD 1224B-03
When you pull the trigger on a fresh or recently swapped pack, the motor draws a spike of current — often 3–5× the running draw — in the first milliseconds of rotation. A BMS that hasn't profiled that inrush yet may read it as a fault and cut power immediately. This is especially common with high-torque fastening modes or when the chuck is already under load at trigger pull. The fix is controlled break-in cycling at partial load so the BMS builds an accurate current map before you push maximum torque.
Kobalt charger blinking red and refusing to accept the pack after storage
Kobalt 24V chargers reject packs where cell voltage has dropped below roughly 2.5V per cell — a protection threshold that blocks charging to prevent damage to over-discharged lithium cells. A pack left unused for several months can self-discharge past that floor. If the charger blinks red and never starts a charge cycle, try a brief trickle from a compatible Li-ion recovery charger to bring cells up to 2.8–3.0V per cell, then return the pack to the Kobalt charger. Once voltage clears the acceptance threshold, the standard charge cycle will initiate normally.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Kobalt
- Manufacturer: CS
- Series: Standard
- Color: Black/Blue
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Kobalt KRAD 1224B-03 cuts out the moment I pull the trigger — is the battery faulty?
Not necessarily faulty — this is a BMS overcurrent trip triggered by motor-start inrush current. The current spike at the instant of trigger pull can exceed the BMS overcurrent threshold if the pack hasn't profiled the motor yet. Run two light-load cycles first to let the BMS calibrate its cutoff thresholds. If it still trips under no load, check that the slide connector is fully seated and the rail contacts are clean and flat.
The drill bogs down and loses power halfway through driving screws — what's causing that?
That's voltage sag under sustained load — different from a BMS trip. When contact resistance is high at the rail interface, or when cells are partially degraded, voltage drops under current draw and the motor loses torque. Clean the battery terminals and tool contacts with a dry cloth or contact eraser and test again. If sag persists with a new pack, measure the rail voltage under load — a healthy 24V pack should hold above 21V during moderate driving; anything below that points to a contact or cell issue.
Does cold weather affect how this battery performs in the Kobalt drill?
Yes — Li-ion internal resistance rises sharply below 5°C, which reduces the current the pack can deliver without tripping the BMS or sagging. In cold conditions the KRAD 1224B-03 may feel sluggish or cut out under loads it handles easily at room temperature. Store the pack indoors before use and let it warm to at least 10°C before demanding full torque. A pack that seems weak at 2°C will typically recover full output once brought back to room temperature.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
