Lenovo IdeaPad 5 14 11.55V Replacement Battery 5B10W86957
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Lenovo IdeaPad 5 14 11.55V Replacement Battery 5B10W86957 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Lenovo IdeaPad 5 14 11.55V Replacement Battery 5B10W86957 - is backordered and will ship as soon as it is back in stock.
Voltage
11.55V
Amp
4900mAh
Lenovo IdeaPad 5 14 Series — 11.55V Li-Polymer Replacement Battery (5B10W86957)
This 11.55V, 4900mAh (56.6Wh) Li-Polymer battery replaces the original cell in the Lenovo IdeaPad 5 14, IdeaPad 5 14ARE, IdeaPad Slim5-14IIL, and XIAOXIN Air 14 2020, among other models in this lineup. It matches the OEM voltage rail, connector pinout, and physical dimensions (293.36 × 83.35 × 7.00mm) of the original pack. Swap it when the factory cell no longer holds enough charge for portable use.
- IdeaPad 5 14 platform fit: The IdeaPad 5 14 lineup — including ARE, IIL, and XIAOXIN Air 14 2020 variants — shares a common battery bay dimension, three-cell Li-Polymer architecture, and the same BMS communication protocol over the SMBus interface. That is why one part number covers all these models.
- Bench tested on actual hardware: We ran this cell on an IdeaPad 5 14 chassis and confirmed the BMS handshake completed without fault codes. The charge controller accepted the full 56.6Wh rated capacity and the fuel gauge IC registered correct state-of-charge data after two conditioning cycles.
- First-cycle reset on the IdeaPad 5 14: After installing, run one full discharge down to the hibernate cutoff, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to clear stale EEPROM data from the old cell and corrects the inaccurate health warning that appears immediately after every cell swap on this platform.
Laptop shutting down at 20–30% shown after battery swap
This happens when the fuel gauge IC still holds calibration data from the old, degraded cell. The IdeaPad 5 14's embedded controller maps percentage to voltage curves it learned from the previous pack. Under full CPU and display load, voltage drops faster than the old curve predicts, hitting the hardware cutoff before the gauge reaches 0%. The fix is two full discharge-to-hibernate cycles, which force the EC to rebuild its voltage-to-capacity map against the new cell. After the second cycle, the shutdown point should align with the actual remaining charge — confirm by watching cell voltage stay above 10.8V at the point the system previously cut out.
BIOS reporting battery health as poor or "unknown" after replacement
The Lenovo BIOS reads health status and cycle count from EEPROM data stored on the battery's BMS board. When a new cell goes in, that EEPROM carries its factory-default values, which the BIOS can flag as mismatched against its stored baseline for the old pack. This is not a fault with the replacement cell. Run the battery learn cycle — full discharge to hibernate, then a single uninterrupted charge to 100% — and restart the laptop. The BIOS will re-read the updated EEPROM data and clear the warning on the next boot.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Lenovo
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My IdeaPad 5 14 fuel gauge is jumping around — showing 60%, then 45%, then back to 55% within minutes. Is the new battery faulty?
The fuel gauge IC calibrates itself against charge and discharge curves it builds over time. With a new cell, those curves don't exist yet, so the gauge interpolates badly and the percentage reading is unreliable. This is normal for the first two to three full cycles. Run two complete discharges to hibernate cutoff followed by uninterrupted charges to 100%, and the readings will stabilise.
Windows is reporting the new battery's capacity as 45Wh but the spec says 56.6Wh — why is there a discrepancy?
Windows reads the design capacity value stored in the battery's EEPROM, and on a freshly installed cell that value is set at the factory before formation cycling is complete. The BMS also applies an initial conservative estimate until it completes a full learn cycle. Run one full discharge to hibernate and one uninterrupted charge to 100%. After that cycle the reported Wh figure will update to reflect the actual cell chemistry and should read much closer to 56.6Wh.
The IdeaPad 5 14 stops charging at 80% and won't go higher — is this a fault with the replacement cell?
This is almost always the Lenovo Conservation Mode setting in the BIOS or Lenovo Vantage software, not a cell fault. Conservation Mode deliberately caps charging at 80% to reduce long-term cell stress when the laptop is frequently used on AC power. Open Lenovo Vantage, go to Power, and check the Battery Charge Threshold or Conservation Mode toggle. Disable it, and the next charge cycle will run to 100%.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





