Lenovo IdeaPad S41 Replacement Battery L14L2P21 7.4V 4050mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Lenovo IdeaPad S41 Replacement Battery L14L2P21 7.4V 4050mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Lenovo IdeaPad S41 Replacement Battery L14L2P21 7.4V 4050mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
4050mAh
Lenovo IdeaPad S41 Series — 7.4V Li-Polymer Replacement Battery (L14L2P21)
This 7.4V, 4050mAh (29.97Wh) lithium-polymer cell replaces the OEM battery in the Lenovo IdeaPad S41 family, including the S41-70, S41-70AM, and S41-70-ISE. It matches the original slim 6.20mm profile so it fits inside the chassis without modification. Part numbers L14L2P21 and L14M2P21 both cross-reference to this cell.
- S41 series compatibility: The S41, S41-70, S41-70AM, and related variants all share the same 7.4V two-cell Li-Polymer architecture, the same 10-pin connector, and the same BMS handshake. One cell covers the full line because Lenovo used an identical power rail and protection circuit across every S41 SKU.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on an S41-70 unit. The BMS communicated charge state correctly, protection tripped at the expected low-voltage threshold, and the fuel gauge IC registered the cell without error flags.
- Post-install calibration on the S41: After fitting this cell, run one full discharge until the laptop hibernates, then charge uninterrupted to 100% without interruption. This gives the S41's fuel gauge IC a clean baseline against the new cell chemistry and clears the inaccurate health warning that often appears after every cell swap.
Why the S41 BIOS reports poor battery health immediately after a cell swap
The S41 stores learned capacity data in EEPROM on the battery's protection circuit board. When a new cell goes in, the BIOS compares current readings against the stored profile from the old, degraded cell and flags a mismatch as poor health. This is not a fault with the replacement cell. Running one full discharge-to-hibernate cycle followed by an uninterrupted charge to 100% resets the learn cycle. After two to three full cycles, the BIOS health indicator updates to reflect the new cell's actual capacity.
S41 shutting down at 20–30% charge shown on screen
This happens when the fuel gauge IC is still calibrated to the old cell's voltage curve. Under full CPU and display load, the new cell's actual voltage drops faster than the miscalibrated gauge predicts, hitting the BMS low-voltage cutoff before the percentage reaches zero. It looks like a sudden shutdown, but the cell is simply at a lower real voltage than the gauge shows. The fix is a full discharge calibration cycle — let the laptop run down to hibernate cutoff, then charge uninterrupted to 100%. After one to two full cycles, the gauge re-maps to the new cell and shutdown-at-percentage behaviour stops.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Lenovo
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My S41 shows the new battery as 0% or "unknown" in Windows — is the cell dead?
No. The Windows fuel gauge IC carries over calibration data from the old cell and cannot map the new cell's voltage curve until it runs a full cycle. Discharge the laptop completely until it hibernates, then charge uninterrupted to 100%. After one full cycle the gauge reads correctly; after two it stabilises.
The S41 BIOS is reporting the replacement battery's Wh as lower than the original — why doesn't it match the spec?
The Wh figure displayed in BIOS pulls from EEPROM data written to the battery's protection circuit. On a new cell, that stored value reflects the rated chemistry specification, while the BIOS cross-references it against the previous cell's learned profile, producing a mismatch. This is an EEPROM data difference, not a capacity fault. Run two full discharge-to-100% charge cycles and the BIOS will update its stored reading to match the actual cell output of 29.97Wh.
The new battery charges to around 80% and then stops — is the charge circuit faulty?
Almost certainly not. Lenovo ships many S41 units with a BIOS-level charge threshold set to 80% through the Lenovo Vantage or Energy Management software. This limit is firmware-controlled, not a battery fault. Open Lenovo Vantage, go to Power settings, and disable the "Conservation Mode" or charge threshold option — charging will then continue to 100%.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.







