LG 14Z970 Replacement Battery 7.7V 7800mAh LBR1223E
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
LG 14Z970 Replacement Battery 7.7V 7800mAh LBR1223E - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
LG 14Z970 Replacement Battery 7.7V 7800mAh LBR1223E - is backordered and will ship as soon as it is back in stock.
Voltage
7.7V
Amp
7800mAh
LG 14Z970 / Gram Series — 7.7V Li-Polymer Replacement Battery (LBR1223E)
This is a 7.7V, 7800mAh (60.06Wh) lithium-polymer replacement battery for the LG 14Z970 and Gram ultrabook series. It fits the GRAM -G.AA52C, GRAM -G.AA53C, GRAM -G.AA75C, and over 150 additional Gram variants sharing the LBR1223E specification. The flat pouch cell matches the original footprint at 260.00 x 97.60 x 5.70mm.
- LG Gram platform compatibility: These Gram models share the same 7.7V battery rail, LBR1223E connector pinout, and BMS handshake protocol — which is why one cell covers the full Gram lineup despite different model suffixes.
- Bench tested on actual hardware: We cycled this cell through charge, discharge, and BMS communication checks on the 14Z970 platform. The BMS authenticated the cell, reported state-of-charge correctly, and did not trigger fault codes.
- Post-install calibration on the LG Gram: After fitting, run the laptop on battery until it hibernates at low charge, then charge uninterrupted to 100% without interruption. This resets the BIOS battery learn cycle and clears the inaccurate health warning the Gram firmware throws after every cell swap.
BIOS reporting poor battery health immediately after fitting a new cell
The LG Gram BIOS stores battery health data in EEPROM tied to the original cell's charge history. When you swap the cell, that stored data doesn't reset automatically — the BIOS reads the old profile and flags the new cell as degraded. This is firmware behaviour, not a fault with the replacement. Run one full discharge-to-hibernate cycle followed by a full uninterrupted charge to 100%, and the BIOS learn cycle will rewrite the EEPROM data against the new cell's actual capacity.
Laptop shuts down with 20–30% charge still showing on screen
This happens when the fuel gauge IC hasn't calibrated against the new cell's voltage curve. The IC is still reading the old cell's discharge profile, so it misjudges where the voltage cliff sits — the battery hits minimum cell voltage under CPU and display load before the gauge reaches zero. It is not a defective cell. Run two to three full discharge-to-hibernate cycles, charging fully between each, and the fuel gauge IC will recalibrate. After calibration, confirm the cell rests at approximately 8.7V fully charged.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: LG
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My LG Gram shows the battery as "unknown" or 0% in Windows immediately after fitting the new cell — is the battery faulty?
The fuel gauge IC on the Gram reads EEPROM data from the previous cell and loses its reference point when a new cell is installed. This causes Windows to display 0% or "unknown" until the IC re-establishes communication. Plug in the charger and leave it connected for a full charge cycle without interruption. If the reading normalises above 90%, the cell and BMS are working correctly — run one full discharge-to-hibernate cycle to complete calibration.
The LG Gram BIOS is reporting the wrong Wh rating — it shows 57Wh instead of 60Wh after the swap. Should I be concerned?
The Wh figure the BIOS displays is pulled from the EEPROM rating stored on the cell's protection circuit, which can differ slightly from the measured chemistry capacity. The 60.06Wh figure in the product data reflects the actual cell capacity, not the EEPROM-stored nominal. This discrepancy is common across LBR1223E replacements and does not affect charging, discharge behaviour, or BMS function. No action is needed — the gap is a reporting artefact, not a capacity shortfall.
The new LG 14Z970 battery stops charging at 80% and won't go higher — is the charger or the cell at fault?
Neither — this is the LG Gram's BIOS-controlled charge limit, which some firmware versions enable by default to reduce cell stress during long periods on AC power. Check LG's power management utility or the BIOS power settings menu for a "battery care" or "charge limit" option. Disable it or set the charge ceiling to 100%, then reconnect the charger. The cell will charge to full once the firmware limit is lifted.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






