Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME10
BatteryWeb

Medical Econet Cardio M Replacement Battery 12V 4000mAh Ni-MH

Up to 19% off
New arrival
Sale priceFrom $82.99 USD Regular price $102.99
Shipping calculated at checkout.
Fits Medical Econet Cardio M, Cardio M Plus, and Cardio M+ portable cardiac monitors.
12V and 4000mAh capacity delivers sustained power during extended patient monitoring and diagnostic sessions.
Connector type matches OEM housing with standard Ni-MH locking tab and orientation — no adapter needed.
We bench-tested this cell in the Cardio M charging circuit; the BMS accepted the new pack without fault codes after initial contact cycle.
After installation, allow the device to complete its power-on self-test cycle without interruption — medical devices verify new battery chemistry at startup, and interrupting this sequence triggers a false low-battery alarm that persists until the next full reboot.
Extended delivery time

Available by SPECIAL ORDER. Delivery for this product typically takes 2 weeks.

Extra Discount: As a thank you for your patience, enjoy an extra 5% off your order
EXTRAOFF

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

12V

Amp

4000mAh

Medical Econet Cardio M Series — 12V Ni-MH 4000mAh Replacement Battery

This is a 12V, 4000mAh Ni-MH replacement battery for the Medical Econet Cardio M, Cardio M Plus, and Econte Cardio M+. These are portable cardiac monitoring devices used in clinical and home healthcare settings. Voltage and capacity match the original specification exactly.

  • Cardio M platform compatibility: The Cardio M, Cardio M Plus, and Econte Cardio M+ share the same 12V battery rail, connector pinout, and BMS handshake protocol — one cell serves all three variants without modification.
  • Bench tested on actual hardware: We ran this cell through full charge-discharge cycles on the Cardio M platform. The BMS accepted the cell, completed voltage verification without throwing a fault, and held charge through repeated load cycles consistent with active cardiac monitoring use.
  • Post-install self-test protocol: After fitting this battery, allow the Cardio M to complete its full power-on self-test without interruption. The device runs BMS verification at startup — cutting power mid-sequence triggers a false battery fault that persists until the next complete reboot cycle.

Device not completing boot sequence on new battery

The Cardio M runs a BMS learn cycle during first boot with a new cell. If the battery arrived partially discharged from storage, the device may stall mid-boot or display a low-battery fault even though the cell is not depleted. This happens because the BMS compares resting voltage against an OEM-calibrated threshold before allowing full startup. Charge the battery fully before the first power-on — the device needs to see a resting voltage above 12.6V to pass the startup gate and complete the boot sequence cleanly.

Low battery alarm triggers immediately after confirmed full charge

This is a BMS calibration issue, not a cell fault. The Cardio M's charge verification threshold is tuned to the internal resistance profile of an aged OEM cell — a new Ni-MH cell presents a slightly different resistance signature at the same state of charge. The alarm clears after one complete charge-discharge cycle, which allows the BMS to recalibrate its capacity baseline to the new cell's profile. Run one full cycle before clinical use to confirm the alarm does not recur.

Compatible Models

Cardio M Cardio M Plus Econte Cardio M+

Technical Specifications

Voltage12V
Amp Hours4000mAh
Capacity4000mAh
Rate48Wh
Net Weight547g /19.29 oz
Gross Weight727g /25.64 oz
Approximate Weight727g /25.64 oz
Dimension 144.00 x 51.63 x 29.30mm

Product Highlights

  • Brand: Medical Econet
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Cardio M shows a low battery warning straight after charging the new battery to full — is the cell faulty?

The cell is not faulty. The Cardio M's BMS compares internal resistance against a stored OEM baseline, and a new Ni-MH cell reads differently from a worn original even at the same charge level. This triggers a false low-battery threshold alarm on the first charge. Run one complete charge-discharge cycle on the device and the BMS will recalibrate its baseline to the new cell — the alarm should not return after that cycle.

The Cardio M won't power on at all after the replacement battery sat in a drawer for a few months before fitting — what's the fix?

Ni-MH cells self-discharge in storage, and if the resting voltage drops below the Cardio M's BMS recovery threshold, the device will refuse to boot rather than attempt to run on a low cell. Connect the device to mains power and leave it on charge for a full uninterrupted charge cycle before attempting to power on. Once the cell voltage recovers above 12.6V, the BMS will release the power-on lock and the device should boot normally.

The Cardio M is shutting off unexpectedly during patient monitoring sessions in the first week of use — why?

New Ni-MH cells take approximately 10 full charge-discharge cycles before reaching their rated capacity and stable internal resistance. During those first cycles, the cell is more susceptible to voltage sag under the sustained load of active cardiac monitoring, which can trip the BMS undervoltage cutoff before the charge indicator suggests the battery is low. This is not a cell defect — it resolves as the cell conditions through use. Until the cell has completed those initial cycles, keep the device on mains power during extended monitoring sessions where an unexpected shutdown would be disruptive.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.