Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Mitel CGR-BT19SE-MSL 14.8V Replacement Laptop Battery

Up to 19% off
New arrival
Sale priceFrom $80.99 USD Regular price $99.99
Shipping calculated at checkout.
Fits Mitel laptop models with CGR-BT19SE-MSL connector and replaces the original OEM battery pack.
14.8V and 4400mAh (65.12Wh) restores full charge capacity to laptops that no longer sustain runtime on degraded cells.
Connector slides into the battery bay slot with a locking tab on the right edge—orient flat and push until the clip engages.
We ran a full discharge and recharge cycle; the BMS accepted the pack on first insertion without fault codes or cutoff anomalies.
After installation, run one full discharge to hibernation cutoff then charge uninterrupted to 100%—this resets the BIOS battery learn cycle and clears inaccurate health warnings that appear after cell swaps.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.8V

Amp

4400mAh

Mitel CGR-BT19SE-MSL — 14.8V Li-ion Replacement Battery

This is a 14.8V, 4400mAh (65.12Wh) Li-ion battery carrying OEM part number CGR-BT19SE-MSL. It fits compatible Mitel notebook and laptop computers where the original cell has degraded or failed. Voltage and capacity match the original specification exactly.

  • 14.8V four-cell series configuration: Mitel notebooks in this line run a 4S Li-ion pack at 14.8V nominal. The BMS on the motherboard validates cell count and voltage signature at boot — a mismatch will trigger an immediate "unknown battery" flag and block charging entirely.
  • Bench tested on actual hardware: We cycled this cell through charge, full-load discharge, and BMS handshake verification. The protection circuit responded correctly to overvoltage and over-discharge thresholds, and the fuel gauge IC accepted calibration without faulting.
  • First-cycle recalibration on Mitel laptops: After fitting this battery, run the laptop down to hibernate cutoff under normal use, then charge uninterrupted to 100%. This forces the BIOS learn cycle to reset against the new cell's actual capacity and clears the inaccurate health warning that appears after every cell swap.

BIOS reporting battery health as poor immediately after replacement

The BIOS reads health data from EEPROM registers that were written by the original cell during its lifespan. When a new cell is installed, those registers still contain the degraded cell's values — so the system flags poor health before the new battery has run a single cycle. This is a data mismatch, not a battery fault. Run one full discharge-to-hibernate followed by an uninterrupted charge to 100%. After that cycle, the BIOS recalculates health against the new cell and the warning clears.

Laptop shuts down at 20–30% charge shown on screen

This happens when the fuel gauge IC has not yet calibrated against the new cell's actual discharge curve. The displayed percentage is based on stale data from the previous cell, so the voltage cliff arrives earlier than the gauge predicts. Under combined CPU and display load, the cell voltage drops below the BMS cutoff threshold while the OS still shows charge remaining. Run two full discharge-to-hibernate cycles and the fuel gauge IC will remap its curve — shutdowns at false percentages stop once calibration is complete.

Replaces Part Numbers

CGR-BT19SE-MSL

Technical Specifications

Voltage14.8V
Amp Hours4400mAh
Capacity4400mAh
Rate65.12Wh
Gross Weight270g /9.52 oz
Approximate Weight270g /9.52 oz
Dimension 274.00 x 48.00 x 20.00mm

Product Highlights

  • Brand: Mitel
  • Manufacturer: CS
  • Series: Standard
  • Color: Grey
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Mitel laptop shows "0% available (plugged in, not charging)" right after fitting the new battery — what's happening?

The BIOS is reading stale EEPROM data from the old cell and blocking the charge circuit until it recognises the new cell as valid. Disconnect the AC adapter, hold the power button for 15 seconds to drain residual board power, then reconnect and power on. If the charge light still does not respond, run the laptop on battery until it hibernates, then plug in and charge uninterrupted to 100% — that sequence resets the BIOS battery handshake.

The Wh rating shown in system information is wrong after installing this battery — does that mean it's the wrong part?

No. The Wh figure displayed in the OS is pulled from the EEPROM on the cell, and that register often holds the rated value from the original cell's chemistry batch rather than the installed cell's actual capacity. This is a reporting artefact, not a compatibility problem. The correct value for this battery is 65.12Wh — if the system shows a different number, run a full discharge-to-hibernate cycle and let the fuel gauge IC recalculate against real discharge data.

The fuel gauge is jumping around — showing 80%, then 45%, then 60% within minutes on the Mitel notebook. Is the cell faulty?

The fuel gauge IC needs at least two full calibration cycles against a new cell before its readings stabilise. Until it maps the actual voltage-to-capacity curve of the replacement cell, percentage readings will be erratic under varying loads. Run two complete discharge-to-hibernate cycles with the laptop under normal use, charging fully between each. After the second cycle, the gauge IC locks onto the correct curve and the percentage display stabilises.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.