BTY26182 Mobistel Cynus T5 Compatible Battery 3.7V 1700mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
BTY26182 Mobistel Cynus T5 Compatible Battery 3.7V 1700mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
BTY26182 Mobistel Cynus T5 Compatible Battery 3.7V 1700mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
1700mAh
Mobistel Cynus T5 — 3.7V Li-ion Replacement Battery (BTY26182)
This is a 3.7V, 1700mAh Li-ion replacement battery for the Mobistel Cynus T5 smartphone. It also fits the MT-9201w, MT-9201b, and MT-9201S variants. OEM part number BTY26182 confirms fitment across the full MT-9201 line.
- MT-9201 variant coverage: The w, b, and S suffixes denote colour and regional variants — the board layout, connector pinout, and BMS handshake are identical across all three. One cell spec covers the entire line.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on an MT-9201 board. The BMS accepted the cell without error flags, and the charge IC reached full cutoff at the correct 4.2V terminal voltage.
- Fuel gauge recalibration on first use: Disable fast charging for the first full discharge-charge cycle after fitting this cell. The fuel gauge IC calibrates its coulomb counter against the new cell's discharge curve — running a high-current charge into an uncalibrated cell causes erratic percentage readings for weeks.
Why the Cynus T5 reports wrong battery percentage after a cell swap
The Cynus T5 uses a fuel gauge IC that builds a model of the cell's discharge curve over several cycles. When you fit a new cell, the IC is still running the old model. It will misread state-of-charge, often reporting full at 4.05V or jumping erratically in the 40–60% range. One complete discharge to shutdown and a slow, uninterrupted charge to 4.2V forces the IC to rebuild its curve against the new cell. After two full cycles, percentage reporting stabilises.
Sudden shutdown at 20–30% on the replacement cell
This is a voltage cliff problem, not a capacity fault. Under modem or display load, the cell voltage drops sharply below what the IC predicted at that percentage, triggering an emergency cutoff. It happens most often when the fuel gauge IC hasn't completed calibration on the new cell. Run two full slow-charge cycles, then check if shutdowns persist. If the phone still cuts out under load, confirm resting cell voltage reads above 3.7V after a 30-minute rest off charge.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Mobistel
- Manufacturer: CS
- Series: X-Longer
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Cynus T5 doesn't power on at all after the replacement battery sat in a drawer for months — is the cell dead?
Probably not dead, but the BMS has locked out below its minimum threshold, typically 2.5V per cell. Connect the phone to a wall charger and leave it for 20–30 minutes without pressing the power button — the charge IC needs time to trickle current into the cell before the BMS will release the lock. If the charging indicator still doesn't appear after 45 minutes, check that the battery connector is fully seated, as even a half-millimetre gap breaks the BMS circuit.
The phone feels warm near the battery compartment during the first few charges — is something wrong?
Warmth on the first few cycles is normal with a new high-impedance cell. A fresh Li-ion cell has slightly higher internal resistance than a broken-in one, so the charge IC dissipates more energy as heat during constant-current phase. Surface temperature should stay below 40°C and drop noticeably by the third cycle. If the phone stays hot past the fifth charge or the back feels hot to touch rather than just warm, check that no adhesive or debris is trapping heat against the battery compartment.
Fast charging stopped working after I replaced the battery — the phone only slow-charges now.
On the first cycle after a cell swap, the USB negotiation or proprietary charge protocol can fail because the BMS reports the cell as unverified to the charge IC, which falls back to standard 5V slow charge as a safety default. Do one full slow charge to 100%, let the phone cool, then reconnect the charger — most MT-9201 boards re-enable the fast charge handshake on the second cycle. If fast charging still doesn't engage after three cycles, confirm the charger outputs at least 9V under load, as the protocol won't activate below that threshold.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
