Philips Micron Transport CTG7 10.8V Replacement Battery
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Philips Micron Transport CTG7 10.8V Replacement Battery - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Philips Micron Transport CTG7 10.8V Replacement Battery - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
7800mAh
Philips Micron Transport CTG7 — 10.8V Li-ion Replacement Battery (ME202EK)
This is a 10.8V, 7800mAh Li-ion replacement battery for the Philips Micron Transport CTG7 fetal monitor. It fits the portable obstetric monitor used in clinical settings for fetal heart rate and maternal contraction monitoring. Voltage and capacity match the OEM specification for this unit.
- Micron Transport CTG7 fit: The CTG7 runs a dedicated 10.8V Li-ion battery rail with a specific connector and BMS handshake tied to the ME202EK part number. A voltage or chemistry mismatch at that rail will cause the monitor to reject the battery outright or fault at startup.
- Bench tested on actual hardware: We ran this battery through full charge and discharge cycles on the CTG7 platform. The BMS handshake completed without fault flags, and the charge IC accepted the cell without triggering an over-voltage cutoff.
- Post-installation self-test protocol: After fitting this battery, allow the CTG7 to complete its full power-on self-test without interruption. The device runs a BMS verification sequence at boot. Cutting power during this sequence stores a false battery fault that persists until the next clean reboot cycle.
Why the CTG7 alarms low battery immediately after a confirmed full charge
The CTG7's BMS uses stored cell history to validate charge state against an OEM threshold profile. A new cell with no cycle history doesn't match that profile, so the monitor flags it as low even when the cell is fully charged. This clears after one complete charge-discharge cycle, which lets the BMS calibrate against the actual cell. Run that conditioning cycle before putting the unit into clinical rotation.
CTG7 will not power on after the replacement battery sat in storage
Li-ion cells self-discharge in storage. If voltage drops below approximately 9V, the CTG7's BMS may treat the cell as damaged and block startup entirely. This is a protection threshold, not a hardware fault. Connect the monitor to mains power and leave it on charge for at least two hours before attempting to power on — this allows the charge IC to recover the cell voltage above the BMS acceptance threshold before the device tries to boot.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Philips
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The CTG7 is showing a low battery alarm straight after we charged the new battery overnight — is the battery faulty?
The battery is not faulty. The CTG7's BMS compares incoming charge data against a learned cell profile, and a brand-new cell with no cycle history doesn't pass that threshold on first charge. Run one full charge-discharge cycle on the monitor before clinical use and the alarm will clear. Do not use the unit in clinical rotation until that conditioning cycle is complete.
The CTG7 powered on fine after the battery swap but shut itself off unexpectedly during monitoring — what caused that?
New Li-ion cells deliver less stable current in the first 10 cycles while the electrolyte fully wets the electrode surfaces. The CTG7's load profile during active fetal monitoring draws harder than standby, and that load spike can hit the BMS under-voltage cutoff on an unconditioned cell. The fix is the same conditioning cycle — one full charge and discharge before the unit goes into use. After that, the cell handles the peak draw without tripping the BMS cutoff.
The charge indicator on the CTG7 won't climb past around 80% on the first charge — is the charge circuit faulty?
The charge IC on the CTG7 applies a conservative current limit when it sees a cell with no charge history, which caps the displayed state-of-charge below 100% on the first pass. This is normal behaviour, not a fault with the charge circuit or the battery. Let the charge complete fully, then discharge the monitor through normal operation, and recharge from flat. The second charge cycle will reach 100% once the charge IC has baseline data from the cell.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
