Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Propex X-SMART Medical Device 12V Replacement Battery 700mAh

Up to 20% off
New arrival
Sale priceFrom $34.99 USD Regular price $43.99
Shipping calculated at checkout.
Fits Propex X-SMART medical diagnostic device, replaces OEM battery.
12V, 700mAh Ni-MH chemistry delivers stable voltage output for clinical self-test cycles.
Connector type and orientation match OEM slot — no adapter required for installation.
We bench-tested this cell on the X-SMART charge circuit; BMS accepted the new pack without fault codes on first insertion.
Allow the device to complete its power-on self-test cycle without interruption after installation — medical devices verify battery chemistry at startup, and stopping this sequence triggers a false low-battery alarm that persists until the next full reboot.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

12V

Amp

700mAh

Propex X-SMART — 12V Ni-MH Replacement Battery

This is a 12V, 700mAh Ni-MH rechargeable battery for the Propex X-SMART portable medical diagnostic instrument. It replaces the original internal cell pack when capacity degrades and the device can no longer hold a usable charge. Voltage matches the X-SMART's power rail exactly — no modifications needed.

  • X-SMART platform fit: The X-SMART uses a fixed 12V Ni-MH architecture with a BMS that validates chemistry type at startup. A Li-ion or NiCd substitute will fail the device's internal self-test. This cell matches the voltage, chemistry, and physical footprint the BMS expects.
  • Bench tested on actual hardware: We ran this cell through the X-SMART's full charge cycle and monitored BMS handshake at startup. The battery passed the device's power-on self-test and held voltage within spec under the instrument's load profile across the first five cycles.
  • First-use self-test protocol: After installing this battery, allow the X-SMART to complete its full power-on self-test without interrupting or powering off mid-sequence. Medical devices run BMS verification at boot — cutting power during this window records a battery fault that persists until the next complete reboot cycle.

Device not completing boot sequence on new battery

The X-SMART runs a BMS learn cycle on first boot with a new cell. If the battery arrived partially discharged from storage, the BMS may see voltage below its startup threshold and halt the boot sequence before the self-test completes. Charge the battery fully before the first power-on — the X-SMART's charge IC will bring the Ni-MH cell to 12V at a controlled rate. Once fully charged, the boot sequence completes normally and the BMS logs the new cell's baseline.

Low battery alarm triggers immediately after a confirmed full charge

This happens when the BMS compares the new cell's discharge curve against the threshold profile it learned from the original aged cell. A fresh Ni-MH cell delivers slightly different voltage characteristics in the first few cycles compared to a broken-in one. Run one complete charge-discharge cycle on the X-SMART before using it clinically — this allows the BMS to recalibrate its low-battery threshold to the new cell's actual curve. After that cycle, the alarm clears and readings normalise.

Compatible Models

X-SMART

Technical Specifications

Voltage12V
Amp Hours700mAh
Capacity700mAh
Rate8.4Wh
Net Weight120.8g /4.26 oz
Gross Weight145.8g /5.14 oz
Approximate Weight145.8g /5.14 oz
Dimension 52.00 x 46.42 x 21.28mm

Product Highlights

  • Brand: Propex
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My X-SMART keeps shutting off unexpectedly mid-use even though the battery shows charged — what's happening?

The X-SMART's load profile during active diagnostic use draws harder than during standby, and a new Ni-MH cell's internal resistance is slightly elevated in the first 10 cycles. Under that load, voltage briefly sags below the BMS cutoff threshold, triggering a protective shutdown even when the cell is not actually depleted. This is not a faulty battery — it's the BMS protecting the cell during the break-in window. Run the battery through five full charge-discharge cycles before clinical use and the shutoffs will stop.

The X-SMART won't power on at all after the replacement battery sat in the device for several weeks without being charged — can it be recovered?

Ni-MH cells self-discharge over storage, and if the voltage dropped below the X-SMART's BMS recovery threshold (typically around 9V for a 12V Ni-MH pack), the device will not boot. Connect the X-SMART to its charger and leave it for a full uninterrupted charge cycle — the charge IC will attempt a trickle recovery on a deeply discharged cell before switching to full charge current. If the charge indicator activates within 30 minutes, the cell is recovering. After a full charge completes, attempt power-on.

The charge indicator on the X-SMART never reaches 100% on the first charge with the new battery — is the cell defective?

It is not defective. The X-SMART's charge IC applies a conservative current limit when it first sees a new cell, extending the charge cycle beyond what a conditioned cell takes. This is a deliberate protection behaviour — the IC does not yet have a learned capacity reference for the new cell. Let the first charge run to natural termination without unplugging the device. After that first full cycle completes, subsequent charges will reach the 100% indicator at the expected rate.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.