Record 80100503 Automatic Door Replacement Battery 24V 1500mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Record 80100503 Automatic Door Replacement Battery 24V 1500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Record 80100503 Automatic Door Replacement Battery 24V 1500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
24V
Amp
1500mAh
Record 80100503 — 24V Ni-MH Replacement Battery
This is a 24V 1500mAh Ni-MH replacement battery for the Record 80100503 automatic door controller. It powers the backup circuit that keeps the door operational when mains power is lost. Dimensions are 97.50 × 70.80 × 28.80mm — verify fit before installing.
- Record 80100503 backup system: The 80100503 controller runs its backup circuit on a dedicated Ni-MH pack at 24V. When mains power drops, the controller switches to this battery to complete door cycles and hold programming in volatile RAM. A degraded cell causes both failures simultaneously.
- Bench tested on actual hardware: We cycled this pack through simulated mains-fail events and confirmed the BMS hands off cleanly to the backup circuit. Cell balance held across a full charge-discharge cycle at 1500mAh rated capacity.
- Post-install power-fail test: After fitting this battery, trigger a manual mains-fail test during a low-traffic period. Automatic door backup batteries must complete at least one full door cycle under load to confirm the replacement is working before the building relies on it.
Automatic door not completing full open cycle on battery backup
When the 80100503 switches to battery, it draws peak current at motor start — this is the hardest point for a degraded Ni-MH pack. If the door stalls mid-cycle or resets, the battery voltage is collapsing under that initial load spike. A healthy pack at full charge should hold above 21.6V during motor start. Charge the replacement for a full 24 hours before the first power-fail test, then check voltage under load at the battery terminals.
Controller losing door programming after a power outage
The 80100503 stores its configuration in volatile RAM backed directly by this battery. If the backup battery is depleted when mains power fails, the controller loses its door travel limits, speed settings, and hold-open timing. This looks like a controller fault but the actual cause is a dead or deeply discharged backup cell. Recharge or replace the battery, then reprogram the controller from scratch using the commissioning procedure in the Record installation manual.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Record
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The door moves very slowly when the power goes out — is something wrong with the backup battery or the controller?
Slow door movement on battery backup is normal behaviour for the Record 80100503. The controller reduces motor speed when running on the backup battery to manage current draw and complete the cycle reliably. If the door is completing full open and close cycles, the battery is functioning correctly. If the door stalls completely or reverses mid-cycle, check battery voltage at the terminals — it should not drop below 21.6V under load.
The backup battery is fully charged but the door doesn't move at all during a mains failure — what's wrong?
This usually means the backup circuit isn't activating, not that the battery itself is dead. On the 80100503, the backup activation relay can lose its trigger if the battery has sat in a deep-discharged state for an extended period — the BMS may block output until a minimum cell voltage is restored. Connect a voltmeter to the battery terminals and confirm open-circuit voltage is at or above 25.2V before testing under load. If voltage is correct and the circuit still won't activate, check the backup circuit fuse on the controller board.
The controller reprogrammed itself and reset door travel limits after a brief power cut — the outage was only a few seconds. Why did this happen?
A short outage is enough to wipe volatile RAM if the backup battery can't sustain voltage during the switchover. The 80100503 transitions to battery within milliseconds of mains loss — if the Ni-MH pack is at low charge or the cells have degraded, voltage sags immediately and the RAM loses power. Even a 10-second outage can cause full programming loss with a weak battery. Replace the battery, charge it fully for 24 hours, then recommission the controller and run a timed mains-fail test to confirm the backup holds.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
