Rotating 2713 Cordless Vacuum Replacement Battery 14.4V 2600mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Rotating 2713 Cordless Vacuum Replacement Battery 14.4V 2600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Rotating 2713 Cordless Vacuum Replacement Battery 14.4V 2600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
14.4V
Amp
2600mAh
Rotating 2713 / 2718 — 14.4V Li-ion Replacement Battery
This is a 14.4V, 2600mAh Li-ion replacement battery for the Rotating 2713 and 2718 cordless vacuum cleaners. It slots into the same battery bay and runs the same motor voltage rail as the original cell. No OEM part number is published for this unit — fit is confirmed by model number only.
- 2713 and 2718 platform fit: Both models share the same 14.4V motor rail, battery form factor, and connector pinout. A single cell covers either unit — the BMS on both vacuums communicates over the same data line.
- Bench tested on actual hardware: We ran this cell through charge, discharge, and sustained suction cycles. The BMS handled thermal conditions correctly and did not trip on normal carpet load. Charge acceptance matched rated capacity.
- Dock charging habit on the 2713 and 2718: Do not leave the vacuum sitting on the dock permanently. These models trickle-charge continuously when docked, and Li-ion cells held near full charge under trickle current lose usable capacity faster than cells that are charged to full and then removed. Charge fully, then pull it off the dock.
Suction dropping before the battery indicator reaches low
On the 2713 and 2718, this usually isn't the battery — it's motor voltage sag under a restricted airflow path. When the filter is partially blocked, the motor draws above its rated current to maintain speed. The BMS reads this as an overload condition and reduces output voltage to protect the cell. Clear the filter first, then retest. If suction recovers immediately, the battery is fine.
Motor cuts out mid-clean, then restarts after a short pause
This is a BMS overcurrent trip, not a failing battery. Sustained suction against a blockage — hair wrap around the brush roll, a clogged filter, or a tight seal around a nozzle — pulls enough current to trigger the protection circuit. The BMS cuts output, waits for the draw to drop, then resets. Remove the blockage, wait 30 seconds, and restart. If it trips again on an empty floor, measure resting voltage — a healthy cell at partial charge should read 14.0V or above.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Rotating
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Rotating 2713 loses suction well before the battery light comes on — is the battery actually flat?
Not necessarily. On the 2713, a partially clogged filter forces the motor to pull more current than rated, which causes the BMS to sag output voltage and drop suction — even with charge remaining in the cell. Clean or replace the filter, then run the vacuum again. If suction holds steady, the battery is not the problem.
The motor on my 2718 keeps cutting out for a few seconds and then coming back — what's happening?
That's a BMS overcurrent trip. A blockage — hair tangled in the brush roll, a sealed nozzle, or a clogged filter — creates a sustained high-current draw, and the protection circuit shuts output to guard the cell. Clear the restriction, wait 30 seconds, and restart. If it trips on a clear floor with no load, check resting voltage — a cell in good condition should sit at 14.0V or higher when partially charged.
I charged my Rotating 2713 overnight on the dock and now it seems to run for less time than it used to — did I damage it?
Continuous dock charging is a known cause of capacity fade on these vacuums. The charger trickles current into a full Li-ion cell for hours, which degrades the chemistry faster than normal charge cycles. Going forward, charge to full and remove the vacuum from the dock — don't leave it sitting plugged in. A replacement cell will restore lost capacity, but the same habit will degrade the new cell at the same rate.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
