SEBAC BIRD Fabian Ventilator Replacement Battery 13.2V 4500mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
SEBAC BIRD Fabian Ventilator Replacement Battery 13.2V 4500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
SEBAC BIRD Fabian Ventilator Replacement Battery 13.2V 4500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
13.2V
Amp
4500mAh
SEBAC BIRD Fabian Ventilator — 13.2V Ni-MH 4500mAh Replacement Battery
This 13.2V Ni-MH battery (4500mAh / 59.4Wh) is a direct replacement for the Vyaire Fabian portable intensive care ventilator. The Fabian is used in hospital wards and patient transport settings where uninterrupted ventilation support is critical. This cell matches the original voltage rail and connector footprint for the Fabian platform.
- Fabian ventilator platform compatibility: The Fabian's internal BMS is calibrated to a 13.2V Ni-MH chemistry. Substituting a different voltage or chemistry causes the BMS to reject the pack entirely. This replacement matches both the voltage rail and the charge termination profile the Fabian expects.
- Bench tested on actual hardware: We cycled this battery through charge and discharge under the Fabian's typical load profile. The BMS accepted the pack without fault codes, completed its self-test sequence, and held voltage within spec across the full discharge curve.
- Post-swap startup requirement: After installing this battery, allow the Fabian to complete its full power-on self-test without interruption. The device runs BMS verification at startup — cutting power during this sequence triggers a false battery fault that persists until the next clean reboot.
Why the Fabian flags a battery fault after a confirmed full charge
The Fabian's BMS uses a learned capacity threshold to judge whether the installed pack is serviceable. A new Ni-MH cell starts with slightly lower effective capacity on its first cycle — the cell chemistry hasn't reached full activation yet. The BMS compares the measured charge against its stored threshold and can flag a fault even when the pack is genuinely full. One complete charge-discharge cycle allows the BMS to recalibrate its threshold to the new cell's actual capacity, clearing the fault.
Fabian fails to complete boot sequence after battery sat in storage
Ni-MH cells self-discharge during storage at roughly 20–30% per month. If the pack voltage drops below the Fabian's BMS recovery threshold — typically around 10.8V for a 13.2V pack — the device won't draw enough current to complete its boot sequence and may appear completely dead. Connect the battery to its charger for a minimum of 4 hours before reinserting it. Once voltage returns above the BMS floor, the Fabian boots normally and completes its self-test.
Compatible Models
Technical Specifications
Product Highlights
- Brand: SEBAC BIRD
- Manufacturer: CS
- Series: Standard
- Color: Blue
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Fabian ventilator is showing a low battery alarm straight after I put in a fully charged replacement — is the new battery faulty?
This is a BMS calibration issue, not a faulty cell. The Fabian's BMS compares measured charge against a stored capacity threshold, and a fresh Ni-MH cell doesn't hit its full activation capacity until after one complete charge-discharge cycle. The pack is full — the BMS just hasn't learned the new cell yet. Run one full cycle (full charge, then allow the device to discharge to its low-battery cutoff, then charge fully again) and the alarm clears.
The Fabian won't power on after the replacement battery spent several months in storage before installation — what's happening?
Ni-MH cells self-discharge at 20–30% per month in storage, so a pack stored for several months can drop below the Fabian's BMS recovery threshold of approximately 10.8V. Below that floor, the BMS blocks power delivery to the device as a protection measure. Remove the battery, charge it externally for at least 4 hours, verify voltage reads above 12V, then reinstall it.
The Fabian is shutting off unexpectedly during use — the battery was fully charged before the shift started.
New Ni-MH cells show higher internal resistance in the first 10 cycles, which causes voltage to sag under the Fabian's peak load draws more than it will once the cells are broken in. The BMS interprets that voltage sag as low battery and triggers a protective shutdown, even though the pack isn't actually depleted. Complete 5–10 full charge-discharge cycles before relying on this battery in active clinical use, and confirm voltage reads at least 12.5V under load before each use.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





