Sony NP-BN1 Cyber-shot Replacement Battery 3.7V 630mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Sony NP-BN1 Cyber-shot Replacement Battery 3.7V 630mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Sony NP-BN1 Cyber-shot Replacement Battery 3.7V 630mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
630mAh
Sony Cyber-shot DSC-T110P / TX100VR Series — 3.7V Li-ion Replacement Battery (NP-BN1)
This is a 3.7V, 630mAh Li-ion cell compatible with the Sony Cyber-shot DSC-T110P and over 180 other Cyber-shot compact camera models. It replaces the OEM NP-BN / NP-BN1 battery. The cell fits the slim body of the T110 and TX-series cameras without modification to the battery door or contacts.
- T110 and TX-series fit: These models share the NP-BN1 form factor — same 40.50 × 35.00 × 4.70mm footprint, same contact layout, and the same BMS handshake voltage required by the camera body's charge controller. Swapping between models in this family works without any adapter.
- Bench tested on actual hardware: We ran this cell in a DSC-T110 body and a DSC-TX100V. The BMS accepted the cell on first insertion in both units. Charge termination triggered correctly at 4.2V via both the OEM charger and the camera's internal charge circuit.
- First charge cycle on the T110: Run one full charge inside the camera body before heavy use. The T110's battery indicator maps remaining capacity to the cell's discharge curve — it does this calibration on the first in-body charge cycle, so skipping it causes the indicator to read inaccurately for the first several sessions.
Flash not fully recycling between shots on a new NP-BN1 cell
The T110's flash capacitor pulls a sharp burst of current each time it recharges after firing. A new cell that hasn't completed a full charge cycle may show slightly elevated internal resistance, which causes the capacitor recharge to lag. This appears as a longer-than-normal wait between flash-ready shots, or the flash indicator taking extra seconds to clear. After two or three full charge-discharge cycles, internal resistance drops and flash recycle time normalises. If the lag persists beyond that, charge the cell to 4.2V via the OEM charger and retest.
Battery percentage jumping erratically on the DSC-T110 display
The T110's fuel gauge maps display segments to fixed voltage thresholds on the OEM cell's discharge curve. A replacement cell with a slightly different discharge profile hits those thresholds at different points in its actual charge state, so the indicator can jump — for example, dropping two bars at once mid-shoot, then holding steady for a long stretch. This is a mapping mismatch, not a fault with the cell. Run two or three full in-body charge cycles and the camera's controller relearns the thresholds. If the display still jumps after that, check that the cell rests at 3.7V when nominally half-charged.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Sony
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Sony Cyber-shot T110 shows a "no battery" warning after I insert the new NP-BN1 — is the cell dead?
It isn't dead. The T110 body runs a BMS authentication check on first insertion, and a new cell that has never been charged via the OEM charger or camera body can fail that check. Remove the battery, insert it into the OEM charger or the camera with the USB cable connected, and let it run through one full charge to 4.2V. After that first charge, the camera recognises the cell reliably.
Why does my shot count drop sharply when I shoot with the flash enabled on the new battery?
Every flash firing forces the capacitor to recharge immediately — that recharge pulse draws far more current than a normal shutter cycle. Combined with continuous autofocus and the LCD display, flash shooting can cut your shot count to less than half of what you'd get shooting in natural light. This is normal draw behaviour for the NP-BN1 cell at 630mAh. To extend the count, switch to auto-flash only rather than forced flash, which reduces the number of full capacitor recharges per session.
The T110 drains the new battery faster in cold weather — what's happening?
Li-ion cells lose usable capacity as temperature drops because ion mobility through the electrolyte slows. At around 0°C, a 630mAh NP-BN1 can deliver noticeably fewer shots before the camera's low-battery cutoff triggers — even though the cell isn't faulty and recovers capacity when warmed. Keep the camera body in an inner pocket between shots to retain heat. If the camera shuts down in the cold, bring it to room temperature and check the cell voltage — it should read above 3.4V if the cutoff was thermal rather than a genuine depletion.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






